[PATCH 1/2] arm64: dts: imx8mm-beacon: Enable more audio

[Adam Ford]

On Wed, May 5, 2021 at 2:11 PM Adam Ford <aford173 at gmail.com> wrote:
>
> There are audio ports for SPDIF and MICFIL on the baseboard.
> Enable them.
>

Sorry for the noise,  I copied these bindings from NXP's 5.10 branch,
but I didn't realize that fsl,imx-audio-micfil doesn't exist upstream.
I'm going to see if a simple audio driver will work.  Either way, I'll
NAK my own work and submit a V2 later.

adam
> Signed-off-by: Adam Ford <aford173 at gmail.com>
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
> index 6f5e63696ec0..3039a030f3d8 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
> @@ -65,6 +65,20 @@ sound {
>                         "AMIC", "MICBIAS",
>                         "IN3R", "AMIC";
>         };
> +
> +       sound-micfil {
> +               compatible = "fsl,imx-audio-micfil";
> +               model = "imx-audio-micfil";
> +               cpu-dai = <&micfil>;
> +       };
> +
> +       sound-spdif {
> +               compatible = "fsl,imx-audio-spdif";
> +               model = "imx-spdif";
> +               spdif-controller = <&spdif1>;
> +               spdif-out;
> +               spdif-in;
> +       };
>  };
>
>  &ecspi2 {
> @@ -141,6 +155,15 @@ pca6416_1: gpio at 21 {
>         };
>  };
>
> +&micfil {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_micfil>;
> +       assigned-clocks = <&clk IMX8MM_CLK_PDM>;
> +       assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
> +       assigned-clock-rates = <196608000>;
> +       status = "okay";
> +};
> +
>  &sai3 {
>         pinctrl-names = "default";
>         pinctrl-0 = <&pinctrl_sai3>;
> @@ -155,6 +178,23 @@ &snvs_pwrkey {
>         status = "okay";
>  };
>
> +&spdif1 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_spdif1>;
> +       assigned-clocks = <&clk IMX8MM_CLK_SPDIF1>;
> +       assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
> +       assigned-clock-rates = <24576000>;
> +       clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_24M>,
> +               <&clk IMX8MM_CLK_SPDIF1>, <&clk IMX8MM_CLK_DUMMY>,
> +               <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
> +               <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_DUMMY>,
> +               <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
> +               <&clk IMX8MM_AUDIO_PLL1_OUT>, <&clk IMX8MM_AUDIO_PLL2_OUT>;
> +       clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3",
> +               "rxtx4", "rxtx5", "rxtx6", "rxtx7", "spba", "pll8k", "pll11k";
> +       status = "okay";
> +};
> +
>  &uart2 { /* console */
>         pinctrl-names = "default";
>         pinctrl-0 = <&pinctrl_uart2>;
> @@ -209,6 +249,13 @@ MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28  0x41
>                 >;
>         };
>
> +       pinctrl_micfil: micfilgrp {
> +               fsl,pins = <
> +                       MX8MM_IOMUXC_SAI5_RXC_PDM_CLK           0xd6
> +                       MX8MM_IOMUXC_SAI5_RXD0_PDM_DATA0        0xd6
> +               >;
> +       };
> +
>         pinctrl_pcal6414: pcal6414-gpiogrp {
>                 fsl,pins = <
>                         MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27               0x19
> @@ -225,6 +272,14 @@ MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0        0xd6
>                 >;
>         };
>
> +       pinctrl_spdif1: spdif1grp {
> +               fsl,pins = <
> +                       MX8MM_IOMUXC_SPDIF_TX_SPDIF1_OUT        0xd6
> +                       MX8MM_IOMUXC_SPDIF_RX_SPDIF1_IN         0xd6
> +                       MX8MM_IOMUXC_SPDIF_EXT_CLK_SPDIF1_EXT_CLK       0xd6
> +               >;
> +       };
> +
>         pinctrl_uart2: uart2grp {
>                 fsl,pins = <
>                         MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
> --
> 2.25.1
>