[PATCH 02/24] ARM: at91: pm: move the setup of soc_pm.bu->suspended

Claudiu Beznea claudiu.beznea at microchip.com
Wed Mar 31 11:58:46 BST 2021


Move the setup of soc_pm.bu->suspended in platform_suspend::begin
function so that the PMC code in charge with clocks suspend/resume
to differentiate b/w standard PM mode and backup mode.

Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
---
 arch/arm/mach-at91/pm.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index e13ceef7ac9a..3742a1fb76db 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -214,6 +214,8 @@ static int at91_sam9x60_config_pmc_ws(void __iomem *pmc, u32 mode, u32 polarity)
  */
 static int at91_pm_begin(suspend_state_t state)
 {
+	int ret;
+
 	switch (state) {
 	case PM_SUSPEND_MEM:
 		soc_pm.data.mode = soc_pm.data.suspend_mode;
@@ -227,7 +229,16 @@ static int at91_pm_begin(suspend_state_t state)
 		soc_pm.data.mode = -1;
 	}
 
-	return at91_pm_config_ws(soc_pm.data.mode, true);
+	ret = at91_pm_config_ws(soc_pm.data.mode, true);
+	if (ret)
+		return ret;
+
+	if (soc_pm.data.mode == AT91_PM_BACKUP)
+		soc_pm.bu->suspended = 1;
+	else if (soc_pm.bu)
+		soc_pm.bu->suspended = 0;
+
+	return 0;
 }
 
 /*
@@ -296,8 +307,6 @@ static int at91_suspend_finish(unsigned long val)
 static void at91_pm_suspend(suspend_state_t state)
 {
 	if (soc_pm.data.mode == AT91_PM_BACKUP) {
-		soc_pm.bu->suspended = 1;
-
 		cpu_suspend(0, at91_suspend_finish);
 
 		/* The SRAM is lost between suspend cycles */
-- 
2.25.1




More information about the linux-arm-kernel mailing list