[PATCH v2 0/7] remove different PHY fixups

[Shawn Guo]

On Wed, Mar 24, 2021 at 06:54:24AM +0100, Oleksij Rempel wrote:
> Hi Shawn,
> 
> ping, do this patches need some ACK from some one?

As this will break existing DTBs, I need more ACKs from people to see
the consensus that this is the right thing to do.

Shawn

> 
> Regards,
> Oleksij
> 
> On Tue, Mar 09, 2021 at 12:26:08PM +0100, Oleksij Rempel wrote:
> > changes v2:
> > - rebase against latest kernel
> > - fix networking on RIoTBoard
> > 
> > This patch series tries to remove most of the imx6 and imx7 board
> > specific PHY configuration via fixup, as this breaks the PHYs when
> > connected to switch chips or USB Ethernet MACs.
> > 
> > Each patch has the possibility to break boards, but contains a
> > recommendation to fix the problem in a more portable and future-proof
> > way.
> > 
> > regards,
> > Oleksij
> > 
> > Oleksij Rempel (7):
> >   ARM: imx6q: remove PHY fixup for KSZ9031
> >   ARM: imx6q: remove TX clock delay of ar8031_phy_fixup()
> >   ARM: imx6q: remove hand crafted PHY power up in ar8035_phy_fixup()
> >   ARM: imx6q: remove clk-out fixup for the Atheros AR8031 and AR8035
> >     PHYs
> >   ARM: imx6q: remove Atheros AR8035 SmartEEE fixup
> >   ARM: imx6sx: remove Atheros AR8031 PHY fixup
> >   ARM: imx7d: remove Atheros AR8031 PHY fixup
> > 
> >  arch/arm/boot/dts/imx6dl-riotboard.dts  |  2 +
> >  arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts |  2 +-
> >  arch/arm/mach-imx/mach-imx6q.c          | 85 -------------------------
> >  arch/arm/mach-imx/mach-imx6sx.c         | 26 --------
> >  arch/arm/mach-imx/mach-imx7d.c          | 22 -------
> >  5 files changed, 3 insertions(+), 134 deletions(-)
> > 
> > -- 
> > 2.29.2
> > 
> > 
> 
> -- 
> Pengutronix e.K.                           |                             |
> Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |