[PATCH v6 02/13] dt-bindings: media: nxp,imx8mq-vpu: Update the bindings for G2 support

Benjamin Gaignard benjamin.gaignard at collabora.com
Fri Mar 26 14:26:15 GMT 2021


Le 26/03/2021 à 15:11, Philipp Zabel a écrit :
> On Thu, Mar 18, 2021 at 09:20:35AM +0100, Benjamin Gaignard wrote:
>> Introducing G2 hevc video decoder lead to modify the bindings to allow
>> to get one node per VPUs.
>> VPUs share one hardware control block which is provided as a phandle on
>> an syscon.
>> Each node got now one reg and one interrupt.
>> Add a compatible for G2 hardware block: nxp,imx8mq-vpu-g2.
>>
>> To be compatible with older DT the driver is still capable to use 'ctrl'
>> reg-name even if it is deprecated now.
>>
>> Signed-off-by: Benjamin Gaignard <benjamin.gaignard at collabora.com>
>> ---
>> version 5:
>> - This version doesn't break the backward compatibilty between kernel
>>    and DT.
>>
>>   .../bindings/media/nxp,imx8mq-vpu.yaml        | 53 ++++++++++++-------
>>   1 file changed, 34 insertions(+), 19 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
>> index 762be3f96ce9..79502fc8bde5 100644
>> --- a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
>> +++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
>> @@ -15,22 +15,18 @@ description:
>>   
>>   properties:
>>     compatible:
>> -    const: nxp,imx8mq-vpu
>> +    oneOf:
>> +      - const: nxp,imx8mq-vpu
>> +      - const: nxp,imx8mq-vpu-g2
>>   
>>     reg:
>> -    maxItems: 3
>> -
>> -  reg-names:
>> -    items:
>> -      - const: g1
>> -      - const: g2
>> -      - const: ctrl
>> +    maxItems: 1
>>   
>>     interrupts:
>> -    maxItems: 2
>> +    maxItems: 1
>>   
>>     interrupt-names:
>> -    items:
>> +    oneOf:
>>         - const: g1
>>         - const: g2
>>   
>> @@ -46,14 +42,18 @@ properties:
>>     power-domains:
>>       maxItems: 1
>>   
>> +  nxp,imx8mq-vpu-ctrl:
>> +    description: Specifies a phandle to syscon VPU hardware control block
>> +    $ref: "/schemas/types.yaml#/definitions/phandle"
>> +
> Should we drop the 'q' here, i.e. nxp,imx8m-vpu-ctrl so we can use the same
> binding for i.MX8MM later?

I don't know if the control block is the same or not on IMX8MM, so I have only
put a compatible targeting IMX8MQ.

>
>>   required:
>>     - compatible
>>     - reg
>> -  - reg-names
>>     - interrupts
>>     - interrupt-names
>>     - clocks
>>     - clock-names
>> +  - nxp,imx8mq-vpu-ctrl
>>   
>>   additionalProperties: false
>>   
>> @@ -62,18 +62,33 @@ examples:
>>           #include <dt-bindings/clock/imx8mq-clock.h>
>>           #include <dt-bindings/interrupt-controller/arm-gic.h>
>>   
>> -        vpu: video-codec at 38300000 {
>> +        vpu_ctrl: syscon at 38320000 {
>> +                 compatible = "nxp,imx8mq-vpu-ctrl", "syscon";
>> +                 reg = <0x38320000 0x10000>;
>> +        };
>> +
>> +        vpu_g1: video-codec at 38300000 {
>>                   compatible = "nxp,imx8mq-vpu";
>> -                reg = <0x38300000 0x10000>,
>> -                      <0x38310000 0x10000>,
>> -                      <0x38320000 0x10000>;
>> -                reg-names = "g1", "g2", "ctrl";
>> -                interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
>> -                             <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
>> -                interrupt-names = "g1", "g2";
>> +                reg = <0x38300000 0x10000>;
>> +                interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
>> +                interrupt-names = "g1";
>> +                clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
>> +                         <&clk IMX8MQ_CLK_VPU_G2_ROOT>,
> Does the G1 VPU require the G2 clock and vice versa?

Yes either the control hardware block won't work.

Benjamin

>
> regards
> Philipp
>



More information about the linux-arm-kernel mailing list