[PATCH 4/4] ARM: dts: Fix-up EMMC2 controller's frequency

[Scott Branden]

1st line of commit should be ARM: dts: bcm2711

On 2021-03-22 11:58 a.m., Nicolas Saenz Julienne wrote:
> From: Nicolas Saenz Julienne <nsaenzjulienne at suse.de>
> 
> Force emmc2's frequency to 150MHz as the default 100MHz (set by FW)
> seems to interfere with the VPU clock when setup at frequencies bigger
> than 500MHz (a pretty common case). This ends up causing unwarranted
> SDHCI CMD hangs  when no SD card is present.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenz at kernel.org>
> ---
>  arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
> index 3b4ab947492a..9aa8408d9960 100644
> --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
> +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
> @@ -257,6 +257,12 @@ &emmc2 {
>  	vqmmc-supply = <&sd_io_1v8_reg>;
>  	vmmc-supply = <&sd_vcc_reg>;
>  	broken-cd;
> +	/*
> +	 * Force the frequency to 150MHz as the default 100MHz seems to
> +	 * interfere with the VPU clock when setup at frequencies bigger than
> +	 * 500MHz, causing unwarranted CMD hangs.
> +	 */
> +	clock-frequency = <150000000>;
>  	status = "okay";
>  };
>  
> 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4212 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20210322/b16c7546/attachment-0001.p7s>