[PATCH 03/11] i2c: imx-lpi2c: add ipg clk for lpi2c driver

Aisheng Dong aisheng.dong at nxp.com
Fri Mar 19 09:18:10 GMT 2021


> > > +
> > > +	lpi2c_imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
> > > +	if (IS_ERR(lpi2c_imx->clk_ipg)) {
> > > +		dev_err(&pdev->dev, "can't get I2C ipg clock\n");
> > > +		return PTR_ERR(lpi2c_imx->clk_ipg);
> > >  	}
> >
> > Will this break exist dts?
> 
> It will not break the build. But will break the lpi2c probe for imx7ulp and
> imx8qxp/qm.
> I will send two patches to update dts in V2.
> 

Please don't break exist platforms.

Regards
Aisheng

> Best Regards,
> Clark Wang
> 
> >
> > Regards
> > Aisheng
> >
> > >
> > >  	ret = of_property_read_u32(pdev->dev.of_node,
> > > @@ -633,7 +640,8 @@ static int __maybe_unused
> > > lpi2c_runtime_suspend(struct device *dev)  {
> > >  	struct lpi2c_imx_struct *lpi2c_imx = dev_get_drvdata(dev);
> > >
> > > -	clk_disable_unprepare(lpi2c_imx->clk);
> > > +	clk_disable_unprepare(lpi2c_imx->clk_ipg);
> > > +	clk_disable_unprepare(lpi2c_imx->clk_per);
> > >  	pinctrl_pm_select_idle_state(dev);
> > >
> > >  	return 0;
> > > @@ -645,12 +653,18 @@ static int __maybe_unused
> > > lpi2c_runtime_resume(struct device *dev)
> > >  	int ret;
> > >
> > >  	pinctrl_pm_select_default_state(dev);
> > > -	ret = clk_prepare_enable(lpi2c_imx->clk);
> > > +	ret = clk_prepare_enable(lpi2c_imx->clk_per);
> > >  	if (ret) {
> > > -		dev_err(dev, "can't enable I2C clock, ret=%d\n", ret);
> > > +		dev_err(dev, "can't enable I2C per clock, ret=%d\n", ret);
> > >  		return ret;
> > >  	}
> > >
> > > +	ret = clk_prepare_enable(lpi2c_imx->clk_ipg);
> > > +	if (ret) {
> > > +		clk_disable_unprepare(lpi2c_imx->clk_per);
> > > +		dev_err(dev, "can't enable I2C ipg clock, ret=%d\n", ret);
> > > +	}
> > > +
> > >  	return ret;
> > >  }
> > >
> > > --
> > > 2.25.1



More information about the linux-arm-kernel mailing list