[PATCH] arm64: dts: lx2160a-clearfog-itx: add SFP support [*experimental*]

[Shawn Guo]

On Tue, Mar 09, 2021 at 04:36:58PM +0000, Russell King wrote:
> Add 2x2 SFP+ cage support for clearfog-itx boards.
> 
> Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>

What is the implication of [*experimental*] in subject?

Shawn

> ---
>  .../boot/dts/freescale/fsl-lx2160a-cex7.dtsi  | 24 +++++++
>  .../freescale/fsl-lx2160a-clearfog-itx.dtsi   | 64 +++++++++++++++++++
>  2 files changed, 88 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
> index 459dccad8326..afb455210bd0 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
> @@ -122,6 +122,30 @@
>  				vcc-supply = <&sb_3v3>;
>  			};
>  		};
> +
> +		sfp0_i2c: i2c at 4 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <4>;
> +		};
> +
> +		sfp1_i2c: i2c at 5 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <5>;
> +		};
> +
> +		sfp2_i2c: i2c at 6 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <6>;
> +		};
> +
> +		sfp3_i2c: i2c at 7 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <7>;
> +		};
>  	};
>  };
>  
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
> index 2b63235ca627..17f8e733972a 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
> @@ -30,6 +30,54 @@
>  			gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
>  		};
>  	};
> +
> +	sfp0: sfp-0 {
> +		compatible = "sff,sfp";
> +		i2c-bus = <&sfp0_i2c>;
> +		mod-def0-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>;
> +		maximum-power-milliwatt = <2000>;
> +	};
> +
> +	sfp1: sfp-1 {
> +		compatible = "sff,sfp";
> +		i2c-bus = <&sfp1_i2c>;
> +		mod-def0-gpio = <&gpio2 9 GPIO_ACTIVE_LOW>;
> +		maximum-power-milliwatt = <2000>;
> +	};
> +
> +	sfp2: sfp-2 {
> +		compatible = "sff,sfp";
> +		i2c-bus = <&sfp2_i2c>;
> +		mod-def0-gpio = <&gpio2 10 GPIO_ACTIVE_LOW>;
> +		maximum-power-milliwatt = <2000>;
> +	};
> +
> +	sfp3: sfp-3 {
> +		compatible = "sff,sfp";
> +		i2c-bus = <&sfp3_i2c>;
> +		mod-def0-gpio = <&gpio2 11 GPIO_ACTIVE_LOW>;
> +		maximum-power-milliwatt = <2000>;
> +	};
> +};
> +
> +&dpmac7 {
> +	sfp = <&sfp0>;
> +	managed = "in-band-status";
> +};
> +
> +&dpmac8 {
> +	sfp = <&sfp1>;
> +	managed = "in-band-status";
> +};
> +
> +&dpmac9 {
> +	sfp = <&sfp2>;
> +	managed = "in-band-status";
> +};
> +
> +&dpmac10 {
> +	sfp = <&sfp3>;
> +	managed = "in-band-status";
>  };
>  
>  &emdio2 {
> @@ -44,6 +92,22 @@
>  	status = "okay";
>  };
>  
> +&pcs_mdio7 {
> +	status = "okay";
> +};
> +
> +&pcs_mdio8 {
> +	status = "okay";
> +};
> +
> +&pcs_mdio9 {
> +	status = "okay";
> +};
> +
> +&pcs_mdio10 {
> +	status = "okay";
> +};
> +
>  &sata0 {
>  	status = "okay";
>  };
> -- 
> 2.20.1
>