[PATCH v7 07/17] remoteproc: stm32: Move memory parsing to rproc_ops

Mathieu Poirier mathieu.poirier at linaro.org
Wed Mar 10 21:10:15 GMT 2021


From: Arnaud POULIQUEN <arnaud.pouliquen at foss.st.com>

Some actions such as memory resources reallocation are needed when
trying to reattach a co-processor. Use the prepare() operation for
these actions.

Co-developed-by: Mathieu Poirier <mathieu.poirier at linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier at linaro.org>
Signed-off-by: Arnaud POULIQUEN <arnaud.pouliquen at foss.st.com>
---
 drivers/remoteproc/remoteproc_core.c | 14 ++++++++++++--
 drivers/remoteproc/stm32_rproc.c     | 27 ++++++---------------------
 2 files changed, 18 insertions(+), 23 deletions(-)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index bf6f6d15b1c3..1d8bb588d996 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -1582,10 +1582,17 @@ static int rproc_attach(struct rproc *rproc)
 		return ret;
 	}
 
+	/* Do anything that is needed to boot the remote processor */
+	ret = rproc_prepare_device(rproc);
+	if (ret) {
+		dev_err(dev, "can't prepare rproc %s: %d\n", rproc->name, ret);
+		goto disable_iommu;
+	}
+
 	ret = rproc_set_rsc_table(rproc);
 	if (ret) {
 		dev_err(dev, "can't load resource table: %d\n", ret);
-		goto disable_iommu;
+		goto unprepare_device;
 	}
 
 	/* reset max_notifyid */
@@ -1602,7 +1609,7 @@ static int rproc_attach(struct rproc *rproc)
 	ret = rproc_handle_resources(rproc, rproc_loading_handlers);
 	if (ret) {
 		dev_err(dev, "Failed to process resources: %d\n", ret);
-		goto disable_iommu;
+		goto unprepare_device;
 	}
 
 	/* Allocate carveout resources associated to rproc */
@@ -1621,6 +1628,9 @@ static int rproc_attach(struct rproc *rproc)
 
 clean_up_resources:
 	rproc_resource_cleanup(rproc);
+unprepare_device:
+	/* release HW resources if needed */
+	rproc_unprepare_device(rproc);
 disable_iommu:
 	rproc_disable_iommu(rproc);
 	return ret;
diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c
index f647e565014b..3d45f51de4d0 100644
--- a/drivers/remoteproc/stm32_rproc.c
+++ b/drivers/remoteproc/stm32_rproc.c
@@ -207,16 +207,7 @@ static int stm32_rproc_mbox_idx(struct rproc *rproc, const unsigned char *name)
 	return -EINVAL;
 }
 
-static int stm32_rproc_elf_load_rsc_table(struct rproc *rproc,
-					  const struct firmware *fw)
-{
-	if (rproc_elf_load_rsc_table(rproc, fw))
-		dev_warn(&rproc->dev, "no resource table found for this firmware\n");
-
-	return 0;
-}
-
-static int stm32_rproc_parse_memory_regions(struct rproc *rproc)
+static int stm32_rproc_prepare(struct rproc *rproc)
 {
 	struct device *dev = rproc->dev.parent;
 	struct device_node *np = dev->of_node;
@@ -274,12 +265,10 @@ static int stm32_rproc_parse_memory_regions(struct rproc *rproc)
 
 static int stm32_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
 {
-	int ret = stm32_rproc_parse_memory_regions(rproc);
-
-	if (ret)
-		return ret;
+	if (rproc_elf_load_rsc_table(rproc, fw))
+		dev_warn(&rproc->dev, "no resource table found for this firmware\n");
 
-	return stm32_rproc_elf_load_rsc_table(rproc, fw);
+	return 0;
 }
 
 static irqreturn_t stm32_rproc_wdg(int irq, void *data)
@@ -614,6 +603,7 @@ stm32_rproc_get_loaded_rsc_table(struct rproc *rproc, size_t *table_sz)
 }
 
 static const struct rproc_ops st_rproc_ops = {
+	.prepare	= stm32_rproc_prepare,
 	.start		= stm32_rproc_start,
 	.stop		= stm32_rproc_stop,
 	.attach		= stm32_rproc_attach,
@@ -796,14 +786,9 @@ static int stm32_rproc_probe(struct platform_device *pdev)
 	if (ret)
 		goto free_rproc;
 
-	if (state == M4_STATE_CRUN) {
+	if (state == M4_STATE_CRUN)
 		rproc->state = RPROC_DETACHED;
 
-		ret = stm32_rproc_parse_memory_regions(rproc);
-		if (ret)
-			goto free_resources;
-	}
-
 	rproc->has_iommu = false;
 	ddata->workqueue = create_workqueue(dev_name(dev));
 	if (!ddata->workqueue) {
-- 
2.25.1




More information about the linux-arm-kernel mailing list