[PATCH v2 06/18] usb: xhci-mtk: add a function to (un)load bandwidth info

Chunfeng Yun chunfeng.yun at mediatek.com
Mon Mar 8 02:51:55 GMT 2021


Extract a function to load/unload bandwidth info, and remove
a dummy check of TT offset.

Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
---
v2: no changes
---
 drivers/usb/host/xhci-mtk-sch.c | 37 ++++++++++++++-------------------
 1 file changed, 16 insertions(+), 21 deletions(-)

diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c
index b1da3cb077c9..9a9685f74940 100644
--- a/drivers/usb/host/xhci-mtk-sch.c
+++ b/drivers/usb/host/xhci-mtk-sch.c
@@ -375,7 +375,6 @@ static void update_bus_bw(struct mu3h_sch_bw_info *sch_bw,
 					sch_ep->bw_budget_table[j];
 		}
 	}
-	sch_ep->allocated = used;
 }
 
 static int check_fs_bus_bw(struct mu3h_sch_ep_info *sch_ep, int offset)
@@ -509,6 +508,19 @@ static void update_sch_tt(struct usb_device *udev,
 		list_del(&sch_ep->tt_endpoint);
 }
 
+static int load_ep_bw(struct usb_device *udev, struct mu3h_sch_bw_info *sch_bw,
+		      struct mu3h_sch_ep_info *sch_ep, bool loaded)
+{
+	if (sch_ep->sch_tt)
+		update_sch_tt(udev, sch_ep, loaded);
+
+	/* update bus bandwidth info */
+	update_bus_bw(sch_bw, sch_ep, loaded);
+	sch_ep->allocated = loaded;
+
+	return 0;
+}
+
 static u32 get_esit_boundary(struct mu3h_sch_ep_info *sch_ep)
 {
 	u32 boundary = sch_ep->esit;
@@ -535,7 +547,6 @@ static int check_sch_bw(struct usb_device *udev,
 	u32 esit_boundary;
 	u32 min_num_budget;
 	u32 min_cs_count;
-	bool tt_offset_ok = false;
 	int ret;
 
 	/*
@@ -552,8 +563,6 @@ static int check_sch_bw(struct usb_device *udev,
 			ret = check_sch_tt(udev, sch_ep, offset);
 			if (ret)
 				continue;
-			else
-				tt_offset_ok = true;
 		}
 
 		if ((offset + sch_ep->num_budget_microframes) > esit_boundary)
@@ -585,29 +594,15 @@ static int check_sch_bw(struct usb_device *udev,
 	sch_ep->cs_count = min_cs_count;
 	sch_ep->num_budget_microframes = min_num_budget;
 
-	if (sch_ep->sch_tt) {
-		/* all offset for tt is not ok*/
-		if (!tt_offset_ok)
-			return -ERANGE;
-
-		update_sch_tt(udev, sch_ep, 1);
-	}
-
-	/* update bus bandwidth info */
-	update_bus_bw(sch_bw, sch_ep, 1);
-
-	return 0;
+	return load_ep_bw(udev, sch_bw, sch_ep, true);
 }
 
 static void destroy_sch_ep(struct usb_device *udev,
 	struct mu3h_sch_bw_info *sch_bw, struct mu3h_sch_ep_info *sch_ep)
 {
 	/* only release ep bw check passed by check_sch_bw() */
-	if (sch_ep->allocated) {
-		update_bus_bw(sch_bw, sch_ep, 0);
-		if (sch_ep->sch_tt)
-			update_sch_tt(udev, sch_ep, 0);
-	}
+	if (sch_ep->allocated)
+		load_ep_bw(udev, sch_bw, sch_ep, false);
 
 	if (sch_ep->sch_tt)
 		drop_tt(udev);
-- 
2.18.0


More information about the linux-arm-kernel mailing list