[PATCH v1 3/3] Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"

Christophe Leroy christophe.leroy at csgroup.eu
Sat Mar 6 18:09:31 GMT 2021


This reverts commit 6ac9b61786cc64ae5cbfb69413137656f72e8204.

This commit was required because at that time, ioread/iowrite
functions were sub-optimal on powerpc/32 compared to the
architecture specific in_/out_ IO accessors.

But there are now equivalent since
commit 894fa235eb4c ("powerpc: inline iomap accessors").

Signed-off-by: Christophe Leroy <christophe.leroy at csgroup.eu>
---
 include/soc/fsl/qe/qe.h | 34 +++++++++-------------------------
 1 file changed, 9 insertions(+), 25 deletions(-)

diff --git a/include/soc/fsl/qe/qe.h b/include/soc/fsl/qe/qe.h
index 4925a1b59dc9..b02e9fe69146 100644
--- a/include/soc/fsl/qe/qe.h
+++ b/include/soc/fsl/qe/qe.h
@@ -239,37 +239,21 @@ static inline int qe_alive_during_sleep(void)
 #define qe_muram_dma cpm_muram_dma
 #define qe_muram_free_addr cpm_muram_free_addr
 
-#ifdef CONFIG_PPC32
-#define qe_iowrite8(val, addr)     out_8(addr, val)
-#define qe_iowrite16be(val, addr)  out_be16(addr, val)
-#define qe_iowrite32be(val, addr)  out_be32(addr, val)
-#define qe_ioread8(addr)           in_8(addr)
-#define qe_ioread16be(addr)        in_be16(addr)
-#define qe_ioread32be(addr)        in_be32(addr)
-#else
-#define qe_iowrite8(val, addr)     iowrite8(val, addr)
-#define qe_iowrite16be(val, addr)  iowrite16be(val, addr)
-#define qe_iowrite32be(val, addr)  iowrite32be(val, addr)
-#define qe_ioread8(addr)           ioread8(addr)
-#define qe_ioread16be(addr)        ioread16be(addr)
-#define qe_ioread32be(addr)        ioread32be(addr)
-#endif
-
-#define qe_setbits_be32(_addr, _v) qe_iowrite32be(qe_ioread32be(_addr) |  (_v), (_addr))
-#define qe_clrbits_be32(_addr, _v) qe_iowrite32be(qe_ioread32be(_addr) & ~(_v), (_addr))
+#define qe_setbits_be32(_addr, _v) iowrite32be(ioread32be(_addr) |  (_v), (_addr))
+#define qe_clrbits_be32(_addr, _v) iowrite32be(ioread32be(_addr) & ~(_v), (_addr))
 
-#define qe_setbits_be16(_addr, _v) qe_iowrite16be(qe_ioread16be(_addr) |  (_v), (_addr))
-#define qe_clrbits_be16(_addr, _v) qe_iowrite16be(qe_ioread16be(_addr) & ~(_v), (_addr))
+#define qe_setbits_be16(_addr, _v) iowrite16be(ioread16be(_addr) |  (_v), (_addr))
+#define qe_clrbits_be16(_addr, _v) iowrite16be(ioread16be(_addr) & ~(_v), (_addr))
 
-#define qe_setbits_8(_addr, _v) qe_iowrite8(qe_ioread8(_addr) |  (_v), (_addr))
-#define qe_clrbits_8(_addr, _v) qe_iowrite8(qe_ioread8(_addr) & ~(_v), (_addr))
+#define qe_setbits_8(_addr, _v) iowrite8(ioread8(_addr) |  (_v), (_addr))
+#define qe_clrbits_8(_addr, _v) iowrite8(ioread8(_addr) & ~(_v), (_addr))
 
 #define qe_clrsetbits_be32(addr, clear, set) \
-	qe_iowrite32be((qe_ioread32be(addr) & ~(clear)) | (set), (addr))
+	iowrite32be((ioread32be(addr) & ~(clear)) | (set), (addr))
 #define qe_clrsetbits_be16(addr, clear, set) \
-	qe_iowrite16be((qe_ioread16be(addr) & ~(clear)) | (set), (addr))
+	iowrite16be((ioread16be(addr) & ~(clear)) | (set), (addr))
 #define qe_clrsetbits_8(addr, clear, set) \
-	qe_iowrite8((qe_ioread8(addr) & ~(clear)) | (set), (addr))
+	iowrite8((ioread8(addr) & ~(clear)) | (set), (addr))
 
 /* Structure that defines QE firmware binary files.
  *
-- 
2.25.0




More information about the linux-arm-kernel mailing list