[PATCH 2/2] media: rc: remove zte zx ir driver
Sean Young
sean at mess.org
Mon Mar 1 10:25:22 GMT 2021
Hi Arnd,
On Wed, Jan 20, 2021 at 03:25:42PM +0100, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd at arndb.de>
>
> The zte zx platform is getting removed, so this driver is no
> longer needed.
I think the keymap should go too.
drivers/media/rc/keymaps/rc-zx-irdec.c
Any references to RC_MAP_ZX_IRDEC or rc-zx-irdec
Thanks
Sean
>
> Cc: Jun Nie <jun.nie at linaro.org>
> Cc: Shawn Guo <shawnguo at kernel.org>
> Signed-off-by: Arnd Bergmann <arnd at arndb.de>
> ---
> .../devicetree/bindings/media/zx-irdec.txt | 14 --
> drivers/media/rc/Kconfig | 11 --
> drivers/media/rc/Makefile | 1 -
> drivers/media/rc/zx-irdec.c | 181 ------------------
> 4 files changed, 207 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/media/zx-irdec.txt
> delete mode 100644 drivers/media/rc/zx-irdec.c
>
> diff --git a/Documentation/devicetree/bindings/media/zx-irdec.txt b/Documentation/devicetree/bindings/media/zx-irdec.txt
> deleted file mode 100644
> index 295b9fab593e..000000000000
> --- a/Documentation/devicetree/bindings/media/zx-irdec.txt
> +++ /dev/null
> @@ -1,14 +0,0 @@
> -IR Decoder (IRDEC) on ZTE ZX family SoCs
> -
> -Required properties:
> - - compatible: Should be "zte,zx296718-irdec".
> - - reg: Physical base address and length of IRDEC registers.
> - - interrupts: Interrupt number of IRDEC.
> -
> -Exmaples:
> -
> - irdec: ir-decoder at 111000 {
> - compatible = "zte,zx296718-irdec";
> - reg = <0x111000 0x1000>;
> - interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
> - };
> diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
> index 39bc75cc1848..afeef7d99a5a 100644
> --- a/drivers/media/rc/Kconfig
> +++ b/drivers/media/rc/Kconfig
> @@ -509,17 +509,6 @@ config RC_XBOX_DVD
> To compile this driver as a module, choose M here: the module will be
> called xbox_remote.
>
> -config IR_ZX
> - tristate "ZTE ZX IR remote control"
> - depends on RC_CORE
> - depends on ARCH_ZX || COMPILE_TEST
> - help
> - Say Y if you want to use the IR remote control available
> - on ZTE ZX family SoCs.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called zx-irdec.
> -
> config IR_TOY
> tristate "Infrared Toy and IR Droid"
> depends on RC_CORE
> diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
> index f46a72071a7b..23eb7d43d2ff 100644
> --- a/drivers/media/rc/Makefile
> +++ b/drivers/media/rc/Makefile
> @@ -47,6 +47,5 @@ obj-$(CONFIG_IR_IMG) += img-ir/
> obj-$(CONFIG_IR_SERIAL) += serial_ir.o
> obj-$(CONFIG_IR_SIR) += sir_ir.o
> obj-$(CONFIG_IR_MTK) += mtk-cir.o
> -obj-$(CONFIG_IR_ZX) += zx-irdec.o
> obj-$(CONFIG_RC_XBOX_DVD) += xbox_remote.o
> obj-$(CONFIG_IR_TOY) += ir_toy.o
> diff --git a/drivers/media/rc/zx-irdec.c b/drivers/media/rc/zx-irdec.c
> deleted file mode 100644
> index 948ad90ae5d8..000000000000
> --- a/drivers/media/rc/zx-irdec.c
> +++ /dev/null
> @@ -1,181 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * Copyright (C) 2017 Sanechips Technology Co., Ltd.
> - * Copyright 2017 Linaro Ltd.
> - */
> -
> -#include <linux/device.h>
> -#include <linux/err.h>
> -#include <linux/interrupt.h>
> -#include <linux/io.h>
> -#include <linux/module.h>
> -#include <linux/of_platform.h>
> -#include <linux/platform_device.h>
> -
> -#include <media/rc-core.h>
> -
> -#define DRIVER_NAME "zx-irdec"
> -
> -#define ZX_IR_ENABLE 0x04
> -#define ZX_IREN BIT(0)
> -#define ZX_IR_CTRL 0x08
> -#define ZX_DEGL_MASK GENMASK(21, 20)
> -#define ZX_DEGL_VALUE(x) (((x) << 20) & ZX_DEGL_MASK)
> -#define ZX_WDBEGIN_MASK GENMASK(18, 8)
> -#define ZX_WDBEGIN_VALUE(x) (((x) << 8) & ZX_WDBEGIN_MASK)
> -#define ZX_IR_INTEN 0x10
> -#define ZX_IR_INTSTCLR 0x14
> -#define ZX_IR_CODE 0x30
> -#define ZX_IR_CNUM 0x34
> -#define ZX_NECRPT BIT(16)
> -
> -struct zx_irdec {
> - void __iomem *base;
> - struct rc_dev *rcd;
> -};
> -
> -static void zx_irdec_set_mask(struct zx_irdec *irdec, unsigned int reg,
> - u32 mask, u32 value)
> -{
> - u32 data;
> -
> - data = readl(irdec->base + reg);
> - data &= ~mask;
> - data |= value & mask;
> - writel(data, irdec->base + reg);
> -}
> -
> -static irqreturn_t zx_irdec_irq(int irq, void *dev_id)
> -{
> - struct zx_irdec *irdec = dev_id;
> - u8 address, not_address;
> - u8 command, not_command;
> - u32 rawcode, scancode;
> - enum rc_proto rc_proto;
> -
> - /* Clear interrupt */
> - writel(1, irdec->base + ZX_IR_INTSTCLR);
> -
> - /* Check repeat frame */
> - if (readl(irdec->base + ZX_IR_CNUM) & ZX_NECRPT) {
> - rc_repeat(irdec->rcd);
> - goto done;
> - }
> -
> - rawcode = readl(irdec->base + ZX_IR_CODE);
> - not_command = (rawcode >> 24) & 0xff;
> - command = (rawcode >> 16) & 0xff;
> - not_address = (rawcode >> 8) & 0xff;
> - address = rawcode & 0xff;
> -
> - scancode = ir_nec_bytes_to_scancode(address, not_address,
> - command, not_command,
> - &rc_proto);
> - rc_keydown(irdec->rcd, rc_proto, scancode, 0);
> -
> -done:
> - return IRQ_HANDLED;
> -}
> -
> -static int zx_irdec_probe(struct platform_device *pdev)
> -{
> - struct device *dev = &pdev->dev;
> - struct zx_irdec *irdec;
> - struct resource *res;
> - struct rc_dev *rcd;
> - int irq;
> - int ret;
> -
> - irdec = devm_kzalloc(dev, sizeof(*irdec), GFP_KERNEL);
> - if (!irdec)
> - return -ENOMEM;
> -
> - res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> - irdec->base = devm_ioremap_resource(dev, res);
> - if (IS_ERR(irdec->base))
> - return PTR_ERR(irdec->base);
> -
> - irq = platform_get_irq(pdev, 0);
> - if (irq < 0)
> - return irq;
> -
> - rcd = devm_rc_allocate_device(dev, RC_DRIVER_SCANCODE);
> - if (!rcd) {
> - dev_err(dev, "failed to allocate rc device\n");
> - return -ENOMEM;
> - }
> -
> - irdec->rcd = rcd;
> -
> - rcd->priv = irdec;
> - rcd->input_phys = DRIVER_NAME "/input0";
> - rcd->input_id.bustype = BUS_HOST;
> - rcd->map_name = RC_MAP_ZX_IRDEC;
> - rcd->allowed_protocols = RC_PROTO_BIT_NEC | RC_PROTO_BIT_NECX |
> - RC_PROTO_BIT_NEC32;
> - rcd->driver_name = DRIVER_NAME;
> - rcd->device_name = DRIVER_NAME;
> -
> - platform_set_drvdata(pdev, irdec);
> -
> - ret = devm_rc_register_device(dev, rcd);
> - if (ret) {
> - dev_err(dev, "failed to register rc device\n");
> - return ret;
> - }
> -
> - ret = devm_request_irq(dev, irq, zx_irdec_irq, 0, NULL, irdec);
> - if (ret) {
> - dev_err(dev, "failed to request irq\n");
> - return ret;
> - }
> -
> - /*
> - * Initialize deglitch level and watchdog counter beginner as
> - * recommended by vendor BSP code.
> - */
> - zx_irdec_set_mask(irdec, ZX_IR_CTRL, ZX_DEGL_MASK, ZX_DEGL_VALUE(0));
> - zx_irdec_set_mask(irdec, ZX_IR_CTRL, ZX_WDBEGIN_MASK,
> - ZX_WDBEGIN_VALUE(0x21c));
> -
> - /* Enable interrupt */
> - writel(1, irdec->base + ZX_IR_INTEN);
> -
> - /* Enable the decoder */
> - zx_irdec_set_mask(irdec, ZX_IR_ENABLE, ZX_IREN, ZX_IREN);
> -
> - return 0;
> -}
> -
> -static int zx_irdec_remove(struct platform_device *pdev)
> -{
> - struct zx_irdec *irdec = platform_get_drvdata(pdev);
> -
> - /* Disable the decoder */
> - zx_irdec_set_mask(irdec, ZX_IR_ENABLE, ZX_IREN, 0);
> -
> - /* Disable interrupt */
> - writel(0, irdec->base + ZX_IR_INTEN);
> -
> - return 0;
> -}
> -
> -static const struct of_device_id zx_irdec_match[] = {
> - { .compatible = "zte,zx296718-irdec" },
> - { },
> -};
> -MODULE_DEVICE_TABLE(of, zx_irdec_match);
> -
> -static struct platform_driver zx_irdec_driver = {
> - .probe = zx_irdec_probe,
> - .remove = zx_irdec_remove,
> - .driver = {
> - .name = DRIVER_NAME,
> - .of_match_table = zx_irdec_match,
> - },
> -};
> -module_platform_driver(zx_irdec_driver);
> -
> -MODULE_DESCRIPTION("ZTE ZX IR remote control driver");
> -MODULE_AUTHOR("Shawn Guo <shawn.guo at linaro.org>");
> -MODULE_LICENSE("GPL v2");
> --
> 2.29.2
More information about the linux-arm-kernel
mailing list