[PATCH v2] serial: samsung: Checks the return value of function

[Tamseel Shams]

"uart_add_one_port" function call may fail and return
some error code, so adding a check for return value.
If it is returning some error code, then displaying the
result, unregistering the driver and then returning from
probe function with error code.

Signed-off-by: Tamseel Shams <m.shams at samsung.com>
---
Changes since v1:
1. Added support to unregister driver on failure of "uart_add_onr_port"
function call.
2. Commit message updated.

 drivers/tty/serial/samsung_tty.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 9fbc61151c2e..188e2d2da201 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -2253,7 +2253,11 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
 	}
 
 	dev_dbg(&pdev->dev, "%s: adding port\n", __func__);
-	uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
+	ret = uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to add uart port, err %d\n", ret);
+		goto add_port_error;
+	}
 	platform_set_drvdata(pdev, &ourport->port);
 
 	/*
@@ -2272,6 +2276,11 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
 	probe_index++;
 
 	return 0;
+
+add_port_error:
+	ourport->port.mapbase = 0;
+	uart_unregister_driver(&s3c24xx_uart_drv);
+	return ret;
 }
 
 static int s3c24xx_serial_remove(struct platform_device *dev)
-- 
2.17.1