[PATCH V8 0/4] soc: imx: add i.MX BLK-CTL support
Adam Ford
aford173 at gmail.com
Wed Jun 30 05:09:11 PDT 2021
On Wed, Jun 30, 2021 at 4:34 AM Peng Fan (OSS) <peng.fan at oss.nxp.com> wrote:
>
> > Subject: Re: [PATCH V8 0/4] soc: imx: add i.MX BLK-CTL support
> >
> > On Tue, Jun 29, 2021 at 1:56 AM Peng Fan (OSS) <peng.fan at oss.nxp.com>
> > wrote:
> > >
> > > From: Peng Fan <peng.fan at nxp.com>
> > >
> > > V8:
> > > Revert one change in v7, force goto disable_clk for handshake when
> > > power on in patch 3 One minor update to use if{} else {}, not if{};
> > > if{}; in patch 3 Typo Hankshake->Handshake
> > >
> > I am using ATF, branch lf_v2.4, from the NXP code aurora repo with U-Boot
> > v2021.07-rc5
> >
> > I applied this patch against linux-next, I applied the pgc patches [1], and the
> > suggested power-domains to the otg1 and otg2 nodes.
> > I am able to boot the device and use USB, but with this applied, I cannot wake
> > from sleep. If I revert this, the system wakes from sleep again.
>
> I just tried linux-next without this patch on iMX8MM EVK, suspend/resume
> not work. Per my last test, it works before. Not sure what changed in kernel.
>
> Which kernel are you using, any commit or git repo? I could try on imx8mm
> evk and debug the issue you see.
I used kernel-next,
git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
commit 889bab4c367a0ef58208fd80fafa74bb6e2dca26 (tag: next-20210621)
I then applied the GPCv2 patch that Marek sent. You were CC'd on the
e-mail from Marek, but I can forward the patch to you if you can't
find it.
I tested his patch and I was able to suspend-to-RAM and resume.
Once I was comfortable that it worked, I then applied your patch
series for the blk-ctl.
With the blk-ctl series applied, the suspend-resume stopped working.
adam
>
> Thanks,
> Peng.
>
> >
> > [1] -
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatch
> > work.kernel.org%2Fproject%2Flinux-arm-kernel%2Fpatch%2F202106041110
> > 05.6804-1-peng.fan%40oss.nxp.com%2F&data=04%7C01%7Cpeng.fan%
> > 40nxp.com%7Caccded5458c049d67fa308d93b0182d9%7C686ea1d3bc2b4c6
> > fa92cd99c5c301635%7C0%7C0%7C637605699944911752%7CUnknown%7C
> > TWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiL
> > CJXVCI6Mn0%3D%7C1000&sdata=Kf6orRXmScWHDTgD2FOV8OBsgG0p
> > GVs1byVZTHT0gVI%3D&reserved=0
> >
> > I have not enabled video, GPU, VPU nor CSI.
> >
> > Just in case there might be a power-domain dependency missing, here is my
> > power-domain dump:
> >
> > root at beacon-imx8mm-kit:~# cat
> > /sys/kernel/debug/pm_genpd/pm_genpd_summary
> > domain status children
> > performance
> > /device runtime
> > status
> > ---------------------------------------------------------------------------------------------
> > -
> > vpu-h1 off-0
> > 0
> >
> > VPU_BLK_CTL_H1
> > /devices/genpd:3:imx-vpumix-blk-ctl.2 suspended
> > 0
> > vpu-g2 off-0
> > 0
> >
> > VPU_BLK_CTL_G2
> > /devices/genpd:2:imx-vpumix-blk-ctl.0 suspended
> > 0
> > vpu-g1 off-0
> > 0
> >
> > VPU_BLK_CTL_G1
> > /devices/genpd:1:imx-vpumix-blk-ctl.1 suspended
> > 0
> > mipi off-0
> > 0
> > MIPI_DSI,
> > MIPI_CSI
> > /devices/genpd:1:imx-dispmix-blk-ctl.2 suspended
> > 0
> > /devices/genpd:1:imx-dispmix-blk-ctl.3 suspended
> > 0
> > vpumix off-0
> > 0
> >
> > VPU_BLK_CTL_BUS
> > /devices/genpd:0:imx-vpumix-blk-ctl.3 suspended
> > 0
> > gpu off-0
> > 0
> > VPU_BLK_CTL_BUS off-0
> > 0
> >
> > /devices/platform/soc at 0/30000000.bus/303a0000.gpc/imx-pgc-domain.7
> > suspended 0
> >
> > /devices/platform/soc at 0/30000000.bus/303a0000.gpc/imx-pgc-domain.8
> > suspended 0
> >
> > /devices/platform/soc at 0/30000000.bus/303a0000.gpc/imx-pgc-domain.9
> > suspended 0
> > VPU_BLK_CTL_H1 off-0
> > 0
> > VPU_BLK_CTL_G1 off-0
> > 0
> > VPU_BLK_CTL_G2 off-0
> > 0
> > DISPMIX_BUS off-0
> > 0
> > CSI_BRIDGE,
> > LCDIF
> >
> > /devices/platform/soc at 0/30000000.bus/303a0000.gpc/imx-pgc-domain.11
> > suspended 0
> > MIPI_CSI off-0
> > 0
> > MIPI_DSI off-0
> > 0
> > LCDIF off-0
> > 0
> > CSI_BRIDGE off-0
> > 0
> > dispmix off-0
> > 0
> > DISPMIX_BUS
> > /devices/genpd:0:imx-dispmix-blk-ctl.4 suspended
> > 0
> > gpumix off-0
> > 0
> >
> > /devices/platform/soc at 0/30000000.bus/303a0000.gpc/imx-pgc-domain.5
> > suspended 0
> > usb-otg2 on
> > 0
> > /devices/platform/soc at 0/32c00000.bus/32e50000.usb active
> > 0
> > usb-otg1 on
> > 0
> > /devices/platform/soc at 0/32c00000.bus/32e40000.usb active
> > 0
> > pcie off-0
> > 0
> > hsiomix on
> > 0
> >
> > /devices/platform/soc at 0/30000000.bus/303a0000.gpc/imx-pgc-domain.1
> > suspended 0
> >
> > /devices/platform/soc at 0/30000000.bus/303a0000.gpc/imx-pgc-domain.2
> > active 0
> >
> > /devices/platform/soc at 0/30000000.bus/303a0000.gpc/imx-pgc-domain.3
> > active 0
> >
> >
> >
> > > V7:
> > > patch 2: update patch title per Shawn Patch 3: Addressed several
> > > comments from Shawn
> > >
> > > V6:
> > > Thanks for Adam's report on V5.
> > > Resolve the error message dump, it is the child device reuse the
> > > parent device node and matches the parent driver.
> > > Filled the remove function for child device.
> > > A diff dts file for upstream:
> > >
> > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgist
> > > .github.com%2FMrVan%2Fd73888d8273c43ea4a3b28fa668ca1d0&dat
> > a=04%7C0
> > >
> > 1%7Cpeng.fan%40nxp.com%7Caccded5458c049d67fa308d93b0182d9%7C68
> > 6ea1d3bc
> > >
> > 2b4c6fa92cd99c5c301635%7C0%7C0%7C637605699944911752%7CUnknow
> > n%7CTWFpbG
> > >
> > Zsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6
> > Mn0%
> > >
> > 3D%7C1000&sdata=9FcnPd4nwmdjOqrQCTz0YNgUmVQ9UzTHpfh33LKI
> > 7cs%3D&
> > > ;reserved=0
> > >
> > > V5:
> > > Rework the blk-ctl driver to let sub-PGC use blk-ctl as parent power
> > > domain to fix the potential handshake issue.
> > > I still keep R-b/A-b tag for Patch 1,2,4, since very minor changes I
> > > only drop R-b tag for Patch 3, since it has big change.
> > > An example, the pgc_mipi not take pgc_dispmix as parent:
> > >
> > > pgc_dispmix: power-domain at 10 {
> > > #power-domain-cells = <0>;
> > > reg = <IMX8MM_POWER_DOMAIN_DISPMIX>;
> > > clocks = <&clk IMX8MM_CLK_DISP_ROOT>,
> > > <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
> > > <&clk IMX8MM_CLK_DISP_APB_ROOT>;
> > > };
> > >
> > > pgc_mipi: power-domain at 11 {
> > > #power-domain-cells = <0>;
> > > reg = <IMX8MM_POWER_DOMAIN_MIPI>;
> > > power-domains = <&dispmix_blk_ctl
> > IMX8MM_BLK_CTL_PD_DISPMIX_BUS>;
> > > };
> > >
> > > dispmix_blk_ctl: clock-controller at 32e28000 {
> > > compatible = "fsl,imx8mm-dispmix-blk-ctl", "syscon";
> > > reg = <0x32e28000 0x100>;
> > > #power-domain-cells = <1>;
> > > power-domains = <&pgc_dispmix>, <&pgc_mipi>;
> > > power-domain-names = "dispmix", "mipi";
> > > clocks = <&clk IMX8MM_CLK_DISP_ROOT>, <&clk
> > IMX8MM_CLK_DISP_AXI_ROOT>,
> > > <&clk IMX8MM_CLK_DISP_APB_ROOT>;
> > > };
> > >
> > > V4:
> > > Add R-b tag
> > > Typo fix
> > > Update the power domain macro names Per Abel and Frieder
> > >
> > > V3:
> > > Add explaination for not listing items in patch 2 commit log Per Rob.
> > > Addressed comments from Lucas and Frieder on patch [3,4].
> > > A few comments from Jacky was ignored, because following gpcv2
> > > coding style.
> > >
> > > V2:
> > > Fix yaml check failure.
> > >
> > > Previously there is an effort from Abel that take BLK-CTL as clock
> > > provider, but it turns out that there is A/B lock issue and we are not
> > > able resolve that.
> > >
> > > Per discuss with Lucas and Jacky, we made an agreement that take
> > > BLK-CTL as a power domain provider and use GPC's domain as parent, the
> > > consumer node take BLK-CTL as power domain input.
> > >
> > > This patchset has been tested on i.MX8MM EVK board, but one hack is
> > > not included in the patchset is that the DISPMIX BLK-CTL
> > > MIPI_M/S_RESET not implemented. Per Lucas, we will finally have a MIPI
> > > DPHY driver, so fine to leave it.
> > >
> > > Thanks for Lucas's suggestion, Frieder Schrempf for collecting all the
> > > patches, Abel's previous BLK-CTL work, Jacky Bai on help debug issues.
> > >
> > >
> > > Peng Fan (4):
> > > dt-bindings: power: Add defines for i.MX8MM BLK-CTL power domains
> > > dt-bindings: soc: imx: Add bindings for i.MX BLK_CTL
> > > soc: imx: Add generic blk-ctl driver
> > > soc: imx: Add blk-ctl driver for i.MX8MM
> > >
> > > .../bindings/soc/imx/fsl,imx-blk-ctl.yaml | 66 ++++
> > > drivers/soc/imx/Makefile | 2 +-
> > > drivers/soc/imx/blk-ctl-imx8mm.c | 139 ++++++++
> > > drivers/soc/imx/blk-ctl.c | 324
> > ++++++++++++++++++
> > > drivers/soc/imx/blk-ctl.h | 85 +++++
> > > include/dt-bindings/power/imx8mm-power.h | 13 +
> > > 6 files changed, 628 insertions(+), 1 deletion(-) create mode 100644
> > > Documentation/devicetree/bindings/soc/imx/fsl,imx-blk-ctl.yaml
> > > create mode 100644 drivers/soc/imx/blk-ctl-imx8mm.c create mode
> > > 100644 drivers/soc/imx/blk-ctl.c create mode 100644
> > > drivers/soc/imx/blk-ctl.h
> > >
> > > --
> > > 2.30.0
> > >
More information about the linux-arm-kernel
mailing list