[PATCH v6 1/4] clk: zynqmp: Use firmware specific common clock flags

[Stephen Boyd]

Quoting Rajan Vaja (2021-06-28 00:01:19)
> diff --git a/drivers/clk/zynqmp/clk-zynqmp.h b/drivers/clk/zynqmp/clk-zynqmp.h
> index 5beeb41b29fa..aa013a59c7cc 100644
> --- a/drivers/clk/zynqmp/clk-zynqmp.h
> +++ b/drivers/clk/zynqmp/clk-zynqmp.h
> @@ -10,6 +10,20 @@
>  
>  #include <linux/firmware/xlnx-zynqmp.h>
>  
> +/* Common Flags */
> +/* must be gated across rate change */
> +#define ZYNQMP_CLK_SET_RATE_GATE       BIT(0)
> +/* must be gated across re-parent */
> +#define ZYNQMP_CLK_SET_PARENT_GATE     BIT(1)
> +/* propagate rate change up one level */
> +#define ZYNQMP_CLK_SET_RATE_PARENT     BIT(2)
> +/* do not gate even if unused */
> +#define ZYNQMP_CLK_IGNORE_UNUSED       BIT(3)
> +/* don't re-parent on rate change */
> +#define ZYNQMP_CLK_SET_RATE_NO_REPARENT        BIT(7)
> +/* do not gate, ever */
> +#define ZYNQMP_CLK_IS_CRITICAL         BIT(11)

Ok I was hoping the firmware didn't use the CRITICAL and IGNORE_UNUSED
flags but I guess we've lost that battle.