[PATCH V2 2/7] watchdog: bcm2835_wdt: consider system-power-controller property

[Guenter Roeck]

On Tue, Jun 22, 2021 at 09:12:30AM +0200, Stefan Wahren wrote:
> Hi Guenter,
> 
> Am 06.06.21 um 14:16 schrieb Stefan Wahren:
> > Until now all Raspberry Pi boards used the power off function of the SoC.
> > But the Raspberry Pi 400 uses gpio-poweroff for the whole board which
> > possibly cannot register the poweroff handler because the it's
> > already registered by this watchdog driver. So consider the
> > system-power-controller property for registering, which is already
> > defined in soc/bcm/brcm,bcm2835-pm.txt .
> >
> > Signed-off-by: Stefan Wahren <stefan.wahren at i2se.com>
> > Reviewed-by: Nicolas Saenz Julienne <nsaenz at kernel.org>
> > Reviewed-by: Guenter Roeck <linux at roeck-us.net>
> > ---
> >  drivers/watchdog/bcm2835_wdt.c | 10 +++++++---
> >  1 file changed, 7 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/watchdog/bcm2835_wdt.c b/drivers/watchdog/bcm2835_wdt.c
> > index dec6ca0..9490717 100644
> > --- a/drivers/watchdog/bcm2835_wdt.c
> > +++ b/drivers/watchdog/bcm2835_wdt.c
> > @@ -205,9 +205,13 @@ static int bcm2835_wdt_probe(struct platform_device *pdev)
> >  	if (err)
> >  		return err;
> >  
> > -	if (pm_power_off == NULL) {
> > -		pm_power_off = bcm2835_power_off;
> > -		bcm2835_power_off_wdt = wdt;
> > +	if (of_device_is_system_power_controller(pdev->dev.parent->of_node)) {
> > +		if (!pm_power_off) {
> > +			pm_power_off = bcm2835_power_off;
> > +			bcm2835_power_off_wdt = wdt;
> > +		} else {
> > +			dev_info(dev, "Poweroff handler already present!\n");
> > +		}
> >  	}
> >  
> >  	dev_info(dev, "Broadcom BCM2835 watchdog timer");
> 
> this isn't not applied yet. Can this go via the watchdog-next tree into
> 5.14?
> 
I applied it to my watchdog-next branch; it will be up to Wim to send
it upstream. Note that the patch does not how up in linux-watchdog
patchwork (no idea why, though), which is why it got lost.

Guenter