[PATCH] PCI: j721e: Fix an error handling path in 'j721e_pcie_probe()'

[Christophe JAILLET]

If an error occurs after a successful 'cdns_pcie_init_phy()' call, it must
be undone by a 'cdns_pcie_disable_phy()' call, as already done above and
below.

Update the 'goto' to branch at the correct place of the error handling
path.

Fixes: 49e0efdce791 ("PCI: j721e: Add support to provide refclk to PCIe connector")
Signed-off-by: Christophe JAILLET <christophe.jaillet at wanadoo.fr>
---
 drivers/pci/controller/cadence/pci-j721e.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 35e61048e133..8933db6ab1af 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -424,7 +424,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 		ret = clk_prepare_enable(clk);
 		if (ret) {
 			dev_err(dev, "failed to enable pcie_refclk\n");
-			goto err_get_sync;
+			goto err_pcie_setup;
 		}
 		pcie->refclk = clk;
 
-- 
2.30.2