[PATCH 2/6] firmware: xilinx: add macros of node ids for error event

[Abhyuday Godhasara]

Hi,

> -----Original Message-----
> From: Michal Simek <michal.simek at xilinx.com>
> Sent: Monday, June 21, 2021 4:42 PM
> To: Abhyuday Godhasara <agodhasa at xilinx.com>; Michal Simek
> <michals at xilinx.com>
> Cc: Rajan Vaja <RAJANV at xilinx.com>; Manish Narani <MNARANI at xilinx.com>;
> zou_wei at huawei.com; Amit Sunil Dhamne <amitsuni at xlnx.xilinx.com>; Sai
> Krishna Potthuri <lakshmis at xilinx.com>; Jiaying Liang <jliang at xilinx.com>;
> linux-kernel at vger.kernel.org; linux-arm-kernel at lists.infradead.org
> Subject: Re: [PATCH 2/6] firmware: xilinx: add macros of node ids for error
> event
> 
> 
> 
> On 5/28/21 5:59 PM, Abhyuday Godhasara wrote:
> > Add macros for the Node-Id of Error events.
> >
> > Move supported api callback ids from zynqmp-power to zynqmp-firmware.
> >
> > Signed-off-by: Rajan Vaja <rajan.vaja at xilinx.com>
> > Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara at xilinx.com>
> > ---
> >  drivers/soc/xilinx/zynqmp_power.c    |  6 ------
> >  include/linux/firmware/xlnx-zynqmp.h | 13 +++++++++++++
> >  2 files changed, 13 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/soc/xilinx/zynqmp_power.c
> > b/drivers/soc/xilinx/zynqmp_power.c
> > index c556623..76478fe 100644
> > --- a/drivers/soc/xilinx/zynqmp_power.c
> > +++ b/drivers/soc/xilinx/zynqmp_power.c
> > @@ -46,12 +46,6 @@ static const char *const suspend_modes[] = {
> >
> >  static enum pm_suspend_mode suspend_mode = PM_SUSPEND_MODE_STD;
> >
> > -enum pm_api_cb_id {
> > -	PM_INIT_SUSPEND_CB = 30,
> > -	PM_ACKNOWLEDGE_CB,
> > -	PM_NOTIFY_CB,
> > -};
> > -
> >  static void zynqmp_pm_get_callback_data(u32 *buf)  {
> >  	zynqmp_pm_invoke_fn(GET_CALLBACK_DATA, 0, 0, 0, 0, buf); diff --git
> > a/include/linux/firmware/xlnx-zynqmp.h
> > b/include/linux/firmware/xlnx-zynqmp.h
> > index 6557832..c715756 100644
> > --- a/include/linux/firmware/xlnx-zynqmp.h
> > +++ b/include/linux/firmware/xlnx-zynqmp.h
> > @@ -60,6 +60,19 @@
> >  #define XILINX_ZYNQMP_PM_FPGA_FULL	0x0U
> >  #define XILINX_ZYNQMP_PM_FPGA_PARTIAL	BIT(0)
> >
> > +/*
> > + * Node IDs for the Error Events.
> > + */
> > +#define EVENT_ERROR_PMC_ERR1	(0x28100000U)
> > +#define EVENT_ERROR_PMC_ERR2	(0x28104000U)
> > +#define EVENT_ERROR_PSM_ERR1	(0x28108000U)
> > +#define EVENT_ERROR_PSM_ERR2	(0x2810C000U)
> > +
> > +enum pm_api_cb_id {
> > +	PM_INIT_SUSPEND_CB = 30,
> 
> No information about why PM_ACKNOWLEDGE_CB was removed. Doing it via
> separate patch would be the best.
[Abhyuday] Will not remove PM_ACKNOWLEDGE_CB as to be in sync with firmware.

> 
> M
> 
> > +	PM_NOTIFY_CB = 32,
> > +};
> > +
> >  enum pm_api_id {
> >  	PM_GET_API_VERSION = 1,
> >  	PM_REGISTER_NOTIFIER = 5,
> >

Thanks,
Abhyuday