[PATCH 02/10] serial: mvebu-uart: do not allow changing baudrate when uartclk is not available

[Pali Rohár]

Testing mvuart->clk for non-error is not enough as mvuart->clk may contain
valid clk pointer but when clk_prepare_enable(mvuart->clk) failed then
port->uartclk is zero.

When mvuart->clk is not available then port->uartclk is zero too.

Parent clock rate port->uartclk is needed to calculate UART clock divisor
and without it is not possible to change baudrate.

So fix test condition when it is possible to change baudrate.

Signed-off-by: Pali Rohár <pali at kernel.org>
Fixes: 68a0db1d7da2 ("serial: mvebu-uart: add function to change baudrate")
---
 drivers/tty/serial/mvebu-uart.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c
index f81bfdaa608c..dc0c26824ddb 100644
--- a/drivers/tty/serial/mvebu-uart.c
+++ b/drivers/tty/serial/mvebu-uart.c
@@ -445,12 +445,11 @@ static void mvebu_uart_shutdown(struct uart_port *port)
 
 static int mvebu_uart_baud_rate_set(struct uart_port *port, unsigned int baud)
 {
-	struct mvebu_uart *mvuart = to_mvuart(port);
 	unsigned int d_divisor, m_divisor;
 	u32 brdv, osamp;
 
-	if (IS_ERR(mvuart->clk))
-		return -PTR_ERR(mvuart->clk);
+	if (!port->uartclk)
+		return -EOPNOTSUPP;
 
 	/*
 	 * The baudrate is derived from the UART clock thanks to two divisors:
-- 
2.20.1