[PATCH] usb: xhci-mtk: allow multiple Start-Split in a microframe

[Greg Kroah-Hartman]

On Thu, Jun 17, 2021 at 10:11:51AM +0800, Chunfeng Yun wrote:
> This patch is used to relax bandwidth schedule by allowing multiple
> Start-Split in the same microframe.
> 
> Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
> ---
>  drivers/usb/host/xhci-mtk-sch.c | 16 ----------------
>  drivers/usb/host/xhci-mtk.h     |  2 --
>  2 files changed, 18 deletions(-)
> 
> diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c
> index c07411d9b16f..149a0f4a6ec4 100644
> --- a/drivers/usb/host/xhci-mtk-sch.c
> +++ b/drivers/usb/host/xhci-mtk-sch.c
> @@ -470,11 +470,9 @@ static int check_fs_bus_bw(struct mu3h_sch_ep_info *sch_ep, int offset)
>  
>  static int check_sch_tt(struct mu3h_sch_ep_info *sch_ep, u32 offset)
>  {
> -	struct mu3h_sch_tt *tt = sch_ep->sch_tt;
>  	u32 extra_cs_count;
>  	u32 start_ss, last_ss;
>  	u32 start_cs, last_cs;
> -	int i;
>  
>  	if (!sch_ep->sch_tt)
>  		return 0;
> @@ -491,10 +489,6 @@ static int check_sch_tt(struct mu3h_sch_ep_info *sch_ep, u32 offset)
>  		if (!(start_ss == 7 || last_ss < 6))
>  			return -ESCH_SS_Y6;
>  
> -		for (i = 0; i < sch_ep->cs_count; i++)
> -			if (test_bit(offset + i, tt->ss_bit_map))
> -				return -ESCH_SS_OVERLAP;
> -
>  	} else {
>  		u32 cs_count = DIV_ROUND_UP(sch_ep->maxpkt, FS_PAYLOAD_MAX);
>  
> @@ -521,9 +515,6 @@ static int check_sch_tt(struct mu3h_sch_ep_info *sch_ep, u32 offset)
>  		if (cs_count > 7)
>  			cs_count = 7; /* HW limit */
>  
> -		if (test_bit(offset, tt->ss_bit_map))
> -			return -ESCH_SS_OVERLAP;
> -
>  		sch_ep->cs_count = cs_count;
>  		/* one for ss, the other for idle */
>  		sch_ep->num_budget_microframes = cs_count + 2;
> @@ -558,13 +549,6 @@ static void update_sch_tt(struct mu3h_sch_ep_info *sch_ep, bool used)
>  	for (i = 0; i < num_esit; i++) {
>  		base = sch_ep->offset + i * sch_ep->esit;
>  
> -		for (j = 0; j < bits; j++) {

Now that bits is no longer used, we get a build warning.

Can you fix this patch and resend it?

thanks,

greg k-h