[PATCH v6 3/3] pinctrl: Add Xilinx ZynqMP pinctrl driver support

[Sai Krishna Potthuri]

Ping!

> -----Original Message-----
> From: Sai Krishna Potthuri <lakshmis at xilinx.com>
> Sent: Tuesday, May 11, 2021 6:08 PM
> To: Andy Shevchenko <andy.shevchenko at gmail.com>
> Cc: Linus Walleij <linus.walleij at linaro.org>; Rob Herring
> <robh+dt at kernel.org>; Michal Simek <michals at xilinx.com>; Greg Kroah-
> Hartman <gregkh at linuxfoundation.org>; linux-arm Mailing List <linux-arm-
> kernel at lists.infradead.org>; Linux Kernel Mailing List <linux-
> kernel at vger.kernel.org>; devicetree <devicetree at vger.kernel.org>; open
> list:GPIO SUBSYSTEM <linux-gpio at vger.kernel.org>; git <git at xilinx.com>;
> saikrishna12468 at gmail.com
> Subject: RE: [PATCH v6 3/3] pinctrl: Add Xilinx ZynqMP pinctrl driver support
> 
> Hi Andy Shevchenko,
> 
> > -----Original Message-----
> > From: Sai Krishna Potthuri
> > Sent: Wednesday, April 28, 2021 11:04 AM
> > To: Andy Shevchenko <andy.shevchenko at gmail.com>
> > Cc: Linus Walleij <linus.walleij at linaro.org>; Rob Herring
> > <robh+dt at kernel.org>; Michal Simek <michals at xilinx.com>; Greg Kroah-
> > Hartman <gregkh at linuxfoundation.org>; linux-arm Mailing List
> > <linux-arm- kernel at lists.infradead.org>; Linux Kernel Mailing List
> > <linux- kernel at vger.kernel.org>; devicetree
> > <devicetree at vger.kernel.org>; open list:GPIO SUBSYSTEM
> > <linux-gpio at vger.kernel.org>; git <git at xilinx.com>;
> > saikrishna12468 at gmail.com
> > Subject: RE: [PATCH v6 3/3] pinctrl: Add Xilinx ZynqMP pinctrl driver
> > support
> >
> > Hi Andy Shevchenko,
> >
> > > -----Original Message-----
> > > From: Andy Shevchenko <andy.shevchenko at gmail.com>
> > > Sent: Monday, April 26, 2021 7:35 PM
> > > To: Sai Krishna Potthuri <lakshmis at xilinx.com>
> > > Cc: Linus Walleij <linus.walleij at linaro.org>; Rob Herring
> > > <robh+dt at kernel.org>; Michal Simek <michals at xilinx.com>; Greg Kroah-
> > > Hartman <gregkh at linuxfoundation.org>; linux-arm Mailing List
> > > <linux-arm- kernel at lists.infradead.org>; Linux Kernel Mailing List
> > > <linux- kernel at vger.kernel.org>; devicetree
> > > <devicetree at vger.kernel.org>; open list:GPIO SUBSYSTEM
> > > <linux-gpio at vger.kernel.org>; git <git at xilinx.com>;
> > > saikrishna12468 at gmail.com
> > > Subject: Re: [PATCH v6 3/3] pinctrl: Add Xilinx ZynqMP pinctrl
> > > driver
> > support
> ...
> > >
> > > > > > +               ret = zynqmp_pm_pinctrl_get_config(pin, param, &arg);
> > > > > > +               if (arg != PM_PINCTRL_BIAS_PULL_UP)
> > > > > > +                       return -EINVAL;
> > > > >
> > > > > Error code being shadowed. Instead check it here properly.
> > >
> > > > Are you mentioning the case where ret is also a non-zero?
> > > > If yes, then I will update this check to if (!ret && arg !=
> > > > PM_PINCTRL_BIAS_PULL_UP)
> > > >         return -EINVAL;
> > >
> > > No, this is wrong in the same way.
> > >
> > > > ret non-zero case, we are handling at the end of switch case.
> > >
> > > I meant that you need to pass the real return code to the (upper) caller.
> > Here we are checking for valid argument and not the return value of the
> API.
> > If the read value(argument) is not valid and return value of the API
> > is zero (SUCCESS) then framework expects driver to be returned with
> > '-EINVAL' and it is a legal error code in this case.
> Do you agree on this?
> I am ready with the other changes, will send out the patch to address your
> comments.
> 
> Regards
> Sai Krishna