[PATCH v5 3/3] arm64: dts: ti: k3-am64-main: Update the location of TF-A in compliance with U-Boot v2021.10

[Suman Anna]

On 6/16/21 12:12 PM, Aswath Govindraju wrote:
> Due to a limitation for USB DFU boot mode, SPL load address has to be less
> than  or equal to 0x70001000. So, load address of SPL and TF-A have been
> moved to 0x70000000 and 0x701c0000 respectively, in U-Boot version 2021.10.
> 
> Therefore, update TF-A's location in the device tree node.
> 
> Signed-off-by: Aswath Govindraju <a-govindraju at ti.com>

Reviewed-by: Suman Anna <s-anna at ti.com>

> ---
>  arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> index 27888ee6f039..62d2b8fff67d 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> @@ -24,8 +24,8 @@
>  		#size-cells = <1>;
>  		ranges = <0x0 0x00 0x70000000 0x200000>;
>  
> -		tfa-sram at 0 {
> -			reg = <0x0 0x20000>;
> +		tfa-sram at 1c0000 {
> +			reg = <0x1c0000 0x20000>;
>  		};
>  
>  		dmsc-sram at 1e0000 {
>