[PATCH v4 1/3] ARM: dts: zynq: add port definitions to hdmi-tx at 39

[Ricardo Cañuelo]

Define a 'ports' node for 'adv7511: hdmi-tx at 39' to make it compliant with
the adi,adv7511 DT binding.

This fills the minimum requirements to meet the binding requirements,
remote endpoints are not defined.

Signed-off-by: Ricardo Cañuelo <ricardo.canuelo at collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Acked-by: Michal Simek <michal.simek at xilinx.com>
---
 arch/arm/boot/dts/zynq-zc702.dts | 10 ++++++++++
 arch/arm/boot/dts/zynq-zc706.dts | 10 ++++++++++
 2 files changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index cf70aff26c66..13b8ff1bced3 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -141,6 +141,16 @@ adv7511: hdmi-tx at 39 {
 				adi,input-clock = "1x";
 				adi,input-style = <3>;
 				adi,input-justification = "right";
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					port at 0 {
+						reg = <0>;
+					};
+					port at 1 {
+						reg = <1>;
+					};
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index 77943c16d33f..99fa51ba6e93 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -93,6 +93,16 @@ adv7511: hdmi-tx at 39 {
 				adi,input-clock = "1x";
 				adi,input-style = <3>;
 				adi,input-justification = "evenly";
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					port at 0 {
+						reg = <0>;
+					};
+					port at 1 {
+						reg = <1>;
+					};
+				};
 			};
 		};
 
-- 
2.25.1