[PATCH 2/4] ARM: dts: NSP: disable sp804 ccbtimers by default

[Matthew Hagan]

On 13/06/2021 17:22, Florian Fainelli wrote:

>
> On 6/13/2021 2:46 AM, Matthew Hagan wrote:
>> The sp804 ccbtimers are enabled by default, however they may or may not
>> be present on the board. This patch disables them by default, requiring
>> them to be enabled only where applicable.
> The timers are always part of the SoC, so they should always be enabled,
> and if there was some board specific wiring, in that maybe one of the
> times was fed a different clock source than iprocslow, we could deal
> with that on a per-board basis.
>
> If someone does not want a specific timer to be used, it could be
> unbound once the kernel has booted for instance.

I should have spent more time to look at the issue rather rather than
proposing to disable parts of the SoC.

In my case with ccbtimer0, ccbtimer1 both enabled:

[    0.000181] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 15290083572 ns
[    0.000209] Failed to initialize '/axi at 18000000/timer at 35000': -22

but with ccbtimer0 disabled, ccbtimer1 now initialises correctly:

[    0.000186] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 15290083572 ns

Will investigate this further, but yes this patch should be dropped.

Thanks,
Matthew