[PATCH v2 3/5] ARM: dts: NSP: Add common bindings for MX64/MX65

[Florian Fainelli]

On 6/12/2021 4:14 PM, Matthew Hagan wrote:
[snip]
>>> +	pwm-leds {
>>> +		compatible = "pwm-leds";
>>> +
>>> +		red {
>>> +			label = "red:led";
>>> +			pwms = <&pwm 1 50000>;
>>> +		};
>>> +
>>> +		green {
>>> +			label = "green:led";
>>> +			pwms = <&pwm 2 50000>;
>>> +		};
>>> +
>>> +		blue {
>>> +			label = "blue:led";
>>> +			pwms = <&pwm 3 50000>;
>>> +		};
>>> +	};

[snip]

>> What is the reason for overriding this to 2?
> 
> I can't provide an explanation other than that it only works at 2.
> 
> When set to 3 I get the following:
> 
> [    0.784051] OF: /pwm-leds/red: #pwm-cells = 3 found -1
> [    0.789201] of_pwm_get(): can't parse "pwms" property
> [    0.794295] leds_pwm pwm-leds: error -EINVAL: unable to request PWM for red:led
> [    0.801628] leds_pwm: probe of pwm-leds failed with error -22

Strange because with a #pwm-cells value of 3, of_pwm_xlate_with_flags()
would treat the flags as optional so the way you have put it looks
correct to me. I am not sure what the channel sub-nodes are supposed to
do, they do not appear to be documented properties or parsed by the PWM
core?

Is your Device Tree possibly corrupted here?
-- 
Florian