[PATCH v2 2/5] ARM: dts: NSP: Add Meraki MX64/MX65 to Makefile

[Vladimir Oltean]

On Fri, Jun 11, 2021 at 12:27:14AM +0100, Matthew Hagan wrote:
> Add Makefile entries for the Meraki MX64/MX65 series devices.
> 
> Signed-off-by: Matthew Hagan <mnhagan88 at gmail.com>
> ---
>  arch/arm/boot/dts/Makefile | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index f8f09c5066e7..033d9604db60 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -154,6 +154,12 @@ dtb-$(CONFIG_ARCH_BCM_NSP) += \
>  	bcm958525xmc.dtb \
>  	bcm958622hr.dtb \
>  	bcm958623hr.dtb \
> +	bcm958625-meraki-mx64.dtb \
> +	bcm958625-meraki-mx64-a0.dtb \
> +	bcm958625-meraki-mx64w.dtb \
> +	bcm958625-meraki-mx64w-a0.dtb \
> +	bcm958625-meraki-mx65.dtb \
> +	bcm958625-meraki-mx65w.dtb \
>  	bcm958625hr.dtb \
>  	bcm988312hr.dtb \
>  	bcm958625k.dtb
> -- 
> 2.26.3
> 

It is odd to add the device trees to the Makefile in a separate patch
compared to their actual introduction. Does the tree even compile at
this stage?