[PATCH 3/3] crypto: x86/sm4 - add AES-NI/AVX/x86_64 assembler implementation

[Eric Biggers]

On Thu, Jun 10, 2021 at 09:44:59PM +0800, Tianjia Zhang wrote:
> This patch adds AES-NI/AVX/x86_64 assembler implementation of SM4
> block cipher. Through two affine transforms, we can use the AES
> S-Box to simulate the SM4 S-Box to achieve the effect of instruction
> acceleration.
> 

Benchmark results, please.

Also, is this passing the self-tests, including the fuzz tests?

> +/*
> + * void sm4_aesni_avx_expand_key(const u8 *key, u32 *rk_enc,
> + *                  u32 *rk_dec, const u32 *fk, const u32 *ck);
> + */
> +SYM_FUNC_START(sm4_aesni_avx_expand_key)
> +	/* input:
> +	 *	%rdi: 128-bit key
> +	 *	%rsi: rkey_enc
> +	 *	%rdx: rkey_dec
> +	 *	%rcx: fk array
> +	 *	%r8: ck array
> +	 */
> +	FRAME_BEGIN

Key expansion isn't performance-critical.  Can the C library version be used, or
does the key need to be expanded in a way specific to this x86 implementation?

> +/*
> + * void sm4_aesni_avx_crypt4(const u32 *rk, u8 *dst,
> + *                          const u8 *src, int nblocks)
> + */
> +SYM_FUNC_START(sm4_aesni_avx_crypt4)
> +	/* input:
> +	 *	%rdi: round key array, CTX
> +	 *	%rsi: dst (1..4 blocks)
> +	 *	%rdx: src (1..4 blocks)
> +	 *	%rcx: num blocks (1..4)
> +	 */
> +	FRAME_BEGIN
[...]

> +static void sm4_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
> +{
> +	const struct crypto_sm4_ctx *ctx = crypto_tfm_ctx(tfm);
> +
> +	if (crypto_simd_usable()) {
> +		kernel_fpu_begin();
> +		sm4_aesni_avx_crypt4(ctx->rkey_enc, out, in, 1);
> +		kernel_fpu_end();
> +	} else
> +		crypto_sm4_do_crypt(ctx->rkey_enc, out, in);
> +}
> +
> +static void sm4_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
> +{
> +	const struct crypto_sm4_ctx *ctx = crypto_tfm_ctx(tfm);
> +
> +	if (crypto_simd_usable()) {
> +		kernel_fpu_begin();
> +		sm4_aesni_avx_crypt4(ctx->rkey_dec, out, in, 1);
> +		kernel_fpu_end();
> +	} else
> +		crypto_sm4_do_crypt(ctx->rkey_dec, out, in);
> +}

Your assembly code appears to handle encrypting up to 4 blocks at a time.
However you have only wired this up to the "cipher" API which does 1 block at a
time.  Is this intentional?

What are your performance results with real-world chaining modes like XTS, and
do you plan to implement any of these modes directly?

> +
> +static struct crypto_alg sm4_asm_alg = {
> +	.cra_name		= "sm4",
> +	.cra_driver_name	= "sm4-asm",

In arch/x86/crypto/, "-asm" usually means a vanilla x86 assembly implementation
without any AES-NI, SSE, AVX, etc. instructions.  Calling this something like
"sm4-aesni-avx" would make more sense.  (Or is it actually avx2, not avx?)

> +config CRYPTO_SM4_AESNI_AVX_X86_64
> +	tristate "SM4 cipher algorithm (x86_64/AES-NI/AVX)"
> +	depends on X86 && 64BIT
> +	select CRYPTO_SKCIPHER
> +	select CRYPTO_SIMD
> +	select CRYPTO_ALGAPI
> +	select CRYPTO_LIB_SM4

As-is, neither CRYPTO_SKCIPHER nor CRYPTO_SIMD needs to be selected here.

> +	help
> +	  SM4 cipher algorithms (OSCCA GB/T 32907-2016) (x86_64/AES-NI/AVX).
> +
> +	  SM4 (GBT.32907-2016) is a cryptographic standard issued by the
> +	  Organization of State Commercial Administration of China (OSCCA)
> +	  as an authorized cryptographic algorithms for the use within China.
> +
> +	  SMS4 was originally created for use in protecting wireless
> +	  networks, and is mandated in the Chinese National Standard for
> +	  Wireless LAN WAPI (Wired Authentication and Privacy Infrastructure)
> +	  (GB.15629.11-2003).
> +
> +	  The latest SM4 standard (GBT.32907-2016) was proposed by OSCCA and
> +	  standardized through TC 260 of the Standardization Administration
> +	  of the People's Republic of China (SAC).
> +
> +	  The input, output, and key of SMS4 are each 128 bits.
> +
> +	  See also: <https://eprint.iacr.org/2008/329.pdf>
> +
> +	  If unsure, say N.

This is the help text for the x86 implementation specifically.  Please don't
have boilerplate text about the algorithm here; that already exists for the
generic implementation.  The text should explain about the x86 implementation.

- Eric