[PATCH 3/3] ARM: dts: stm32: Add usbphyc_port1 supply on DHCOM SoM

[Marek Vasut]

The port is unused, but shares the same supply with port0, so fill the
DT property in. This fixes the following dtbs_check warning:
arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dt.yaml: usbphyc at 5a006000: usb-phy at 1: 'phy-supply' is a required property

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Alexandre Torgue <alexandre.torgue at foss.st.com>
Cc: Patrice Chotard <patrice.chotard at foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
Cc: kernel at dh-electronics.com
Cc: linux-stm32 at st-md-mailman.stormreply.com
To: linux-arm-kernel at lists.infradead.org
---
 arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
index fb45c5aa878d..4b10b013ffd5 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
@@ -159,3 +159,7 @@ &usbphyc {
 &usbphyc_port0 {
 	phy-supply = <&vdd_usb>;
 };
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+};
-- 
2.30.2