[PATCH 2/2] mmc: sdhci-iproc: Add support for the legacy sdhci controller on the BCM7211

[Florian Fainelli]

On 6/9/2021 2:22 AM, Ulf Hansson wrote:
> On Wed, 9 Jun 2021 at 05:07, Florian Fainelli <f.fainelli at gmail.com> wrote:
>>
>>
>>
>> On 6/8/2021 5:40 AM, Ulf Hansson wrote:
>>> On Wed, 2 Jun 2021 at 21:28, Al Cooper <alcooperx at gmail.com> wrote:
>>>>
>>>> Add support for the legacy Arasan sdhci controller on the BCM7211 and
>>>> related SoC's. This includes adding a .shutdown callback to increase
>>>> the power savings during S5.
>>>
>>> Please split this into two separate changes.
>>>
>>> May I also ask about the ->shutdown() callback and in relation to S5.
>>> What makes the ->shutdown callback only being invoked for S5?
>>
>> It is not only called for S5 (entered via poweroff on a prompt) but also
>> during kexec or reboot. The poweroff path is via:
>>
>> kernel_power_off() -> kernel_shutdown_prepare() -> device_shutdown() ->
>> .shutdown()
>>
>> For kexec or reboot we do not really care about power savings since we
>> are about to load a new image anyway, however for S5/poweroff we do care
>> about quiescing the eMMC controller in a way that its clocks and the
>> eMMC device can be put into low power mode since we will stay in that
>> mode for seconds/hours/days until someone presses a button on their
>> remote (or other wake-up sources).
> 
> Hmm, I am not sure I understand correctly. At shutdown we don't care
> about wake-up sources from the kernel point of view, instead we treat
> everything as if it will be powered off.

The same .shutdown() path is used whether you kexec, reboot or poweroff,
but for poweroff we do care about allowing specific wake-up sources
configured as such to wake-up the system at a later time, like GPIOs,
RTC, etc.

> 
> We put devices into low power state at system suspend and potentially
> also during some of the hibernation phases.
> 
> Graceful shutdown of the eMMC is also managed by the mmc core.

AFAICT that calls mmc_blk_shutdown() but that is pretty much it, the
SDHCI platform_driver still needs to do something in order to conserve
power including disabling host->clk, otherwise we would not have done
that for sdhci-brcmstb.c.
-- 
Florian