[PATCH 14/31] arm64: zynqmp: Enable nand driver for dc2 and dc3

[Michal Simek]

Add description for nand devices on zc1751 dc2 and dc3 boards.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 .../dts/xilinx/zynqmp-zc1751-xm016-dc2.dts    | 26 +++++++++++++++++++
 .../dts/xilinx/zynqmp-zc1751-xm017-dc3.dts    |  9 ++++++-
 2 files changed, 34 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
index 1ac105a82e1b..4b4c19034fe1 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
@@ -127,6 +127,32 @@ rtc at 68 {
 	};
 };
 
+&nand0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand0_default>;
+	arasan,has-mdma;
+
+	nand at 0 {
+		reg = <0x0>;
+		#address-cells = <0x2>;
+		#size-cells = <0x1>;
+		nand-ecc-mode = "soft";
+		nand-ecc-algo = "bch";
+		nand-rb = <0>;
+		label = "main-storage-0";
+	};
+	nand at 1 {
+		reg = <0x1>;
+		#address-cells = <0x2>;
+		#size-cells = <0x1>;
+		nand-ecc-mode = "soft";
+		nand-ecc-algo = "bch";
+		nand-rb = <0>;
+		label = "main-storage-1";
+	};
+};
+
 &pinctrl0 {
 	status = "okay";
 	pinctrl_can0_default: can0-default {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
index 4ea6ef5a7f2b..ba7f1f21c579 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP zc1751-xm017-dc3
  *
- * (C) Copyright 2016 - 2019, Xilinx, Inc.
+ * (C) Copyright 2016 - 2021, Xilinx, Inc.
  *
  * Michal Simek <michal.simek at xilinx.com>
  */
@@ -107,6 +107,13 @@ &i2c1 {
 	clock-frequency = <400000>;
 };
 
+/* MT29F64G08AECDBJ4-6 */
+&nand0 {
+	status = "okay";
+	arasan,has-mdma;
+	num-cs = <2>;
+};
+
 &rtc {
 	status = "okay";
 };
-- 
2.31.1