[PATCH] ARM: config: Refresh mutli v7

[Arnd Bergmann]

On Tue, Jun 8, 2021 at 12:38 PM Joel Stanley <joel at jms.id.au> wrote:
>
> This regenerates the v7 defconfig, with some new options added to ensure
> drivers that were enabled in previous releases are once again enabled.
>
> This was generated atop next-20210607.

Thank you for going through this and updating all the settings. If you
still have
energy after writing up the long changelog, can I ask you to split it up into
separate changes for options that are no longer available (sirf, efi_vars, ...),
options that got moved within the file and those that need some other change?

> SPI_AX88796C was enabled in v5.11 for Exynos boards, but the driver is
> not yet merged. There's still some work being doing to merge this
> driver, so leave it alone for now.

Makes sense

> MICREL_PHY is selected by the ks8851 ethernet driver as of f0791b92d2b6 ("net:
> ks8851: Select PHYLIB and MICREL_PHY in Kconfig").
>
> SMSC_PHY is selected by USB_NET_SMSC95XX as of commit 05b35e7eb9a1 ("smsc95xx:
> add phylib support").
>
> PTP_1588_CLOCK is unknown. SOmething ot do with FEC or STMMAC_ETH?

No idea, in my copy of linux-next it still exists. There are a couple of drivers
that use 'imply PTP_1588_CLOCK', but that is something we should probably
change, as 'imply' usually doesn't do what was intended. Yes, I realize that
PTP_1588_CLOCK was the original motivation for introducing 'imply'...

> The MSM pinctrl drivers fell out of the defconfig as of commit be117ca32261
> ("pinctrl: qcom: Kconfig: Rework PINCTRL_MSM to be a depenency rather then a
> selected config"). Add PINCTRL_MSM so these stay enabled.

Good catch

> POWER_AVS was renamed POWER_AVS_OMAP in commit bca815d62054 ("PM: AVS:
> smartreflex Move driver to soc specific drivers"). Add the new symbol.
>
> STMPE_I2C is default y. It was explicitly added to the defconfig in commit
> d8f0ddc83877 ("ARM: defconfig: add STMPE ADC driver for P4 Note") but it's not
> required.

I suppose it shouldn't really use 'default y', but removing it here is
easier, it's
been this way for ten years now.

> VIVID needs FB=y, which became disabled at some point, so enable it.
> This also ensure the FB_EFI and other drivers stay enabled.

There should probably be a separate effort to remove dependencies on
CONFIG_FB and leave it turned off in defconfig. Hans, do you know the
hard dependency in vivid can be avoided or if this is inherent to how the driver
works?

I had previously tried to decouple DRM from FB, so I'm happy that Kees' patch
made it into linux-next.

> CLK_ACTIONS and CLK_OWL_S500 was explicitly added in commit 26ba4a474aec ("ARM:
> multi_v7_defconfig: Enable Actions Semi platform and drivers"), but it defaults
> on when ARCH_ACTIONS is enabled. Drop them.
>
> QCOM_PM became ARM_QCOM_SPM_CPUIDLE in commit a871be6b8eee ("cpuidle: Convert
> Qualcomm SPM driver to a generic CPUidle driver").
>
> SND_MMP_SOC became CONFIG_SND_MMP_SOC_SSPA in commit a97e384ba78f ("ASoC:
> mmp-sspa: Add Device Tree support"). Enable that instead.
>
> MFD_CROS_EC_DEV defualts on when CROS_EC is enabled.
>
> TEGRA20_APB_DMA is selected by SOC_TEGRA_FUSE if ARCH_TEGRA_2x_SOC since commit
> 19d41e5e9c68 ("soc/tegra: fuse: Add APB DMA dependency for Tegra20").
>
> USB_CHIPIDEA_TEGRA is enabled when USB_CHIPIDEA is enabled. It falls out
> of the defconfig but is enabled, as intended by d50229cee69b ("ARM:
> multi_v7_defconfig: Stop using deprecated USB_EHCI_TEGRA").

These all look good.

> EDAC depends on RAS, so enable it to ensure the EDAC drivers stay
> enabled.
>
> SND_CTL_LED selects LEDS_TRIGGERS and NEW_LEDS so they fall out of the
> defconfig.

Please skip this last change, I think we should change the Kconfig
logic instead here,
so SND_CTL_LED doesn't force-enable the subsystem.

      Arnd