[PATCH 1/4] arm64: dts: renesas: salvator-x(s): Factor out HDMI1 parts
Geert Uytterhoeven
geert+renesas at glider.be
Mon Jun 7 10:39:02 PDT 2021
Move the common parts related to the second HDMI interface on
Salvator-X(S) boards to salvator-common.dtsi, to reduce current and
avoid future duplication of board descriptions.
As this interface is not present on all SoCs that can be found on
Salvator-X(S), but only on R-Car H3, its description are protected by
the preprocessor symbol SOC_HAS_HDMI1, defined in r8a77951.dtsi.
Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
.../boot/dts/renesas/r8a77950-salvator-x.dts | 47 -------------------
.../boot/dts/renesas/r8a77951-salvator-x.dts | 47 -------------------
.../boot/dts/renesas/r8a77951-salvator-xs.dts | 47 -------------------
arch/arm64/boot/dts/renesas/r8a77951.dtsi | 2 +
.../boot/dts/renesas/salvator-common.dtsi | 46 +++++++++++++++++-
5 files changed, 47 insertions(+), 142 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts
index 3e3b954a4a9defe8..718d1597af03dc2e 100644
--- a/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts
@@ -52,29 +52,6 @@ &ehci2 {
status = "okay";
};
-&hdmi1 {
- status = "okay";
-
- ports {
- port at 1 {
- reg = <1>;
- rcar_dw_hdmi1_out: endpoint {
- remote-endpoint = <&hdmi1_con>;
- };
- };
- port at 2 {
- reg = <2>;
- dw_hdmi1_snd_in: endpoint {
- remote-endpoint = <&rsnd_endpoint2>;
- };
- };
- };
-};
-
-&hdmi1_con {
- remote-endpoint = <&rcar_dw_hdmi1_out>;
-};
-
&ohci2 {
status = "okay";
};
@@ -86,34 +63,10 @@ usb2_pins: usb2 {
};
};
-&rcar_sound {
- ports {
- /* rsnd_port0/1 are described in salvator-common.dtsi */
- rsnd_port2: port at 2 {
- reg = <2>;
- rsnd_endpoint2: endpoint {
- remote-endpoint = <&dw_hdmi1_snd_in>;
-
- dai-format = "i2s";
- bitclock-master = <&rsnd_endpoint2>;
- frame-master = <&rsnd_endpoint2>;
-
- playback = <&ssi3>;
- };
- };
- };
-};
-
&sata {
status = "okay";
};
-&sound_card {
- dais = <&rsnd_port0 /* ak4613 */
- &rsnd_port1 /* HDMI0 */
- &rsnd_port2>; /* HDMI1 */
-};
-
&usb2_phy2 {
pinctrl-0 = <&usb2_pins>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/renesas/r8a77951-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77951-salvator-x.dts
index cf2165bdf62511ff..d75fb9a9d3e4309d 100644
--- a/arch/arm64/boot/dts/renesas/r8a77951-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77951-salvator-x.dts
@@ -52,29 +52,6 @@ &ehci2 {
status = "okay";
};
-&hdmi1 {
- status = "okay";
-
- ports {
- port at 1 {
- reg = <1>;
- rcar_dw_hdmi1_out: endpoint {
- remote-endpoint = <&hdmi1_con>;
- };
- };
- port at 2 {
- reg = <2>;
- dw_hdmi1_snd_in: endpoint {
- remote-endpoint = <&rsnd_endpoint2>;
- };
- };
- };
-};
-
-&hdmi1_con {
- remote-endpoint = <&rcar_dw_hdmi1_out>;
-};
-
&ohci2 {
status = "okay";
};
@@ -86,34 +63,10 @@ usb2_pins: usb2 {
};
};
-&rcar_sound {
- ports {
- /* rsnd_port0/1 are described in salvator-common.dtsi */
- rsnd_port2: port at 2 {
- reg = <2>;
- rsnd_endpoint2: endpoint {
- remote-endpoint = <&dw_hdmi1_snd_in>;
-
- dai-format = "i2s";
- bitclock-master = <&rsnd_endpoint2>;
- frame-master = <&rsnd_endpoint2>;
-
- playback = <&ssi3>;
- };
- };
- };
-};
-
&sata {
status = "okay";
};
-&sound_card {
- dais = <&rsnd_port0 /* ak4613 */
- &rsnd_port1 /* HDMI0 */
- &rsnd_port2>; /* HDMI1 */
-};
-
&usb2_phy2 {
pinctrl-0 = <&usb2_pins>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts
index 37202fcdc35bc773..fb8734ea5bc37b49 100644
--- a/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts
@@ -57,29 +57,6 @@ &ehci3 {
status = "okay";
};
-&hdmi1 {
- status = "okay";
-
- ports {
- port at 1 {
- reg = <1>;
- rcar_dw_hdmi1_out: endpoint {
- remote-endpoint = <&hdmi1_con>;
- };
- };
- port at 2 {
- reg = <2>;
- dw_hdmi1_snd_in: endpoint {
- remote-endpoint = <&rsnd_endpoint2>;
- };
- };
- };
-};
-
-&hdmi1_con {
- remote-endpoint = <&rcar_dw_hdmi1_out>;
-};
-
&hsusb3 {
dr_mode = "otg";
status = "okay";
@@ -127,35 +104,11 @@ usb2_ch3_pins: usb2_ch3 {
};
};
-&rcar_sound {
- ports {
- /* rsnd_port0/1 are described in salvator-common.dtsi */
- rsnd_port2: port at 2 {
- reg = <2>;
- rsnd_endpoint2: endpoint {
- remote-endpoint = <&dw_hdmi1_snd_in>;
-
- dai-format = "i2s";
- bitclock-master = <&rsnd_endpoint2>;
- frame-master = <&rsnd_endpoint2>;
-
- playback = <&ssi3>;
- };
- };
- };
-};
-
/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */
&sata {
status = "okay";
};
-&sound_card {
- dais = <&rsnd_port0 /* ak4613 */
- &rsnd_port1 /* HDMI0 */
- &rsnd_port2>; /* HDMI1 */
-};
-
&usb2_phy2 {
pinctrl-0 = <&usb2_pins>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
index 2e4c18b8eee49f5e..68e54ead31b451ca 100644
--- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
@@ -11,6 +11,8 @@
#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
+#define SOC_HAS_HDMI1
+
/ {
compatible = "renesas,r8a7795";
#address-cells = <2>;
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index e4d9742e147a1bd9..ea1d8693a38eacbb 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -208,7 +208,11 @@ sound_card: sound {
label = "rcar-sound";
dais = <&rsnd_port0 /* ak4613 */
- &rsnd_port1>; /* HDMI0 */
+ &rsnd_port1 /* HDMI0 */
+#ifdef SOC_HAS_HDMI1
+ &rsnd_port2 /* HDMI1 */
+#endif
+ >;
};
vbus0_usb2: regulator-vbus0-usb2 {
@@ -428,6 +432,31 @@ &hdmi0_con {
remote-endpoint = <&rcar_dw_hdmi0_out>;
};
+#ifdef SOC_HAS_HDMI1
+&hdmi1 {
+ status = "okay";
+
+ ports {
+ port at 1 {
+ reg = <1>;
+ rcar_dw_hdmi1_out: endpoint {
+ remote-endpoint = <&hdmi1_con>;
+ };
+ };
+ port at 2 {
+ reg = <2>;
+ dw_hdmi1_snd_in: endpoint {
+ remote-endpoint = <&rsnd_endpoint2>;
+ };
+ };
+ };
+};
+
+&hdmi1_con {
+ remote-endpoint = <&rcar_dw_hdmi1_out>;
+};
+#endif /* SOC_HAS_HDMI1 */
+
&hscif1 {
pinctrl-0 = <&hscif1_pins>;
pinctrl-names = "default";
@@ -824,6 +853,21 @@ rsnd_endpoint1: endpoint {
playback = <&ssi2>;
};
};
+
+#ifdef SOC_HAS_HDMI1
+ rsnd_port2: port at 2 {
+ reg = <2>;
+ rsnd_endpoint2: endpoint {
+ remote-endpoint = <&dw_hdmi1_snd_in>;
+
+ dai-format = "i2s";
+ bitclock-master = <&rsnd_endpoint2>;
+ frame-master = <&rsnd_endpoint2>;
+
+ playback = <&ssi3>;
+ };
+ };
+#endif /* SOC_HAS_HDMI1 */
};
};
--
2.25.1
More information about the linux-arm-kernel
mailing list