[PATCH V2 2/7] watchdog: bcm2835_wdt: consider system-power-controller property

[Stefan Wahren]

Until now all Raspberry Pi boards used the power off function of the SoC.
But the Raspberry Pi 400 uses gpio-poweroff for the whole board which
possibly cannot register the poweroff handler because the it's
already registered by this watchdog driver. So consider the
system-power-controller property for registering, which is already
defined in soc/bcm/brcm,bcm2835-pm.txt .

Signed-off-by: Stefan Wahren <stefan.wahren at i2se.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenz at kernel.org>
Reviewed-by: Guenter Roeck <linux at roeck-us.net>
---
 drivers/watchdog/bcm2835_wdt.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/watchdog/bcm2835_wdt.c b/drivers/watchdog/bcm2835_wdt.c
index dec6ca0..9490717 100644
--- a/drivers/watchdog/bcm2835_wdt.c
+++ b/drivers/watchdog/bcm2835_wdt.c
@@ -205,9 +205,13 @@ static int bcm2835_wdt_probe(struct platform_device *pdev)
 	if (err)
 		return err;
 
-	if (pm_power_off == NULL) {
-		pm_power_off = bcm2835_power_off;
-		bcm2835_power_off_wdt = wdt;
+	if (of_device_is_system_power_controller(pdev->dev.parent->of_node)) {
+		if (!pm_power_off) {
+			pm_power_off = bcm2835_power_off;
+			bcm2835_power_off_wdt = wdt;
+		} else {
+			dev_info(dev, "Poweroff handler already present!\n");
+		}
 	}
 
 	dev_info(dev, "Broadcom BCM2835 watchdog timer");
-- 
2.7.4