[PATCH] dt-bindings: spi: xilinx: convert to yaml

[Rob Herring]

On Mon, May 31, 2021 at 02:21:42PM +0900, Nobuhiro Iwamatsu wrote:
> Convert SPI for Xilinx bindings documentation to YAML schemas.
> 
> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
> ---
>  .../devicetree/bindings/spi/spi-xilinx.txt    | 23 ---------
>  .../devicetree/bindings/spi/spi-xilinx.yaml   | 51 +++++++++++++++++++
>  2 files changed, 51 insertions(+), 23 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/spi/spi-xilinx.txt
>  create mode 100644 Documentation/devicetree/bindings/spi/spi-xilinx.yaml
> 
> diff --git a/Documentation/devicetree/bindings/spi/spi-xilinx.txt b/Documentation/devicetree/bindings/spi/spi-xilinx.txt
> deleted file mode 100644
> index 5f4ed3e5c9942c..00000000000000
> --- a/Documentation/devicetree/bindings/spi/spi-xilinx.txt
> +++ /dev/null
> @@ -1,23 +0,0 @@
> -Xilinx SPI controller Device Tree Bindings
> --------------------------------------------------
> -
> -Required properties:
> -- compatible		: Should be "xlnx,xps-spi-2.00.a", "xlnx,xps-spi-2.00.b" or "xlnx,axi-quad-spi-1.00.a"
> -- reg			: Physical base address and size of SPI registers map.
> -- interrupts		: Property with a value describing the interrupt
> -			  number.
> -
> -Optional properties:
> -- xlnx,num-ss-bits	 : Number of chip selects used.
> -- xlnx,num-transfer-bits : Number of bits per transfer. This will be 8 if not specified
> -
> -Example:
> -	axi_quad_spi at 41e00000 {
> -			compatible = "xlnx,xps-spi-2.00.a";
> -			interrupt-parent = <&intc>;
> -			interrupts = <0 31 1>;
> -			reg = <0x41e00000 0x10000>;
> -			xlnx,num-ss-bits = <0x1>;
> -			xlnx,num-transfer-bits = <32>;
> -	};
> -
> diff --git a/Documentation/devicetree/bindings/spi/spi-xilinx.yaml b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml
> new file mode 100644
> index 00000000000000..17463151b36a02
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml
> @@ -0,0 +1,51 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/spi/spi-xilinx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Xilinx SPI controller Device Tree Bindings
> +
> +maintainers:
> +  - Michal Simek <michal.simek at xilinx.com>
> +
> +allOf:
> +  - $ref: "spi-controller.yaml#"
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: xlnx,xps-spi-2.00.a
> +      - const: xlnx,xps-spi-2.00.b
> +      - const: xlnx,axi-quad-spi-1.00.a

Use enum instead of oneOf+const.

> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  xlnx,num-ss-bits:
> +    description: Number of chip selects used.

Constraints? 0-2^32 is good?

> +
> +  xlnx,num-transfer-bits:
> +    description: Number of bits per transfer. This will be 8 if not specified.

Constraints?

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    spi0: spi at 41e00000 {
> +      compatible = "xlnx,xps-spi-2.00.a";
> +      interrupt-parent = <&intc>;
> +      interrupts = <0 31 1>;
> +      reg = <0x41e00000 0x10000>;
> +      xlnx,num-ss-bits = <0x1>;
> +      xlnx,num-transfer-bits = <32>;
> +    };
> +...
> -- 
> 2.30.0