[PATCH v3 5/6] dt-bindings: mailbox : arm, mhu: Use examples with matching schema

[Sudeep Holla]

Currently the example provided in arm,mhu schema complains as below:

    Documentation/devicetree/bindings/mailbox/arm,mhu.example.dt.yaml :0:0:
    /example-0/soc/scb at 2e000000: failed to match any schema with compatible:
    ['fujitsu,mb86s70-scb-1.0']

Fix the same using examples based on Juno platform. The old SCPI firmware
used MHU with standard 32-bit data transfer protocol while the new SCMI
firmware uses MHU and expects to be used in doorbell mode. Update example
with SCPI and SCMI firmware nodes to demonstrate both 32-bit data transfer
and doorbell mode of MHU operations

Cc: Rob Herring <robh+dt at kernel.org>
Cc: Viresh Kumar <viresh.kumar at linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla at arm.com>
---
 .../devicetree/bindings/mailbox/arm,mhu.yaml  | 48 +++++++++++++++----
 1 file changed, 38 insertions(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml
index 496308d91a86..bd49c201477d 100644
--- a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml
+++ b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml
@@ -101,11 +101,19 @@ additionalProperties: false
             clocks = <&clock 0 2 1>;
             clock-names = "apb_pclk";
         };
+    };
 
-        mhu_client_scb: scb at 2e000000 {
-            compatible = "fujitsu,mb86s70-scb-1.0";
-            reg = <0 0x2e000000 0 0x4000>;
+    firmware {
+        scpi {
+            compatible = "arm,scpi";
             mboxes = <&mhuA 1>; /* HP-NonSecure */
+            shmem = <&cpu_scp_hpri>; /* HP-NonSecure */
+
+            scpi_devpd: power-controller {
+                compatible = "arm,scpi-power-domains";
+                num-domains = <2>;
+                #power-domain-cells = <1>;
+            };
         };
     };
 
@@ -125,16 +133,36 @@ additionalProperties: false
             clocks = <&clock 0 2 1>;
             clock-names = "apb_pclk";
         };
+    };
 
-        scpi {
-            compatible = "arm,scpi";
-            mboxes = <&mhuB 1 4>; /* HP-NonSecure, 5th doorbell */
-            shmem = <&cpu_scp_hpri>; /* HP-NonSecure */
+    firmware {
+        scmi {
+            compatible = "arm,scmi";
+            mboxes = <&mhuB 0 0>, /* LP-NonSecure, 1st doorbell */
+                     <&mhuB 0 1>; /* LP-NonSecure, 2nd doorbell */
+            mbox-names = "tx", "rx";
+            shmem = <&cpu_scp_lpri0>,
+                    <&cpu_scp_lpri1>;
 
-            scpi_devpd: power-controller {
-                compatible = "arm,scpi-power-domains";
-                num-domains = <2>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            scmi_devpd: protocol at 11 {
+                reg = <0x11>;
                 #power-domain-cells = <1>;
             };
+
+            scmi_dvfs: protocol at 13 {
+                reg = <0x13>;
+                #clock-cells = <1>;
+
+                mboxes = <&mhuB 1 2>, /* HP-NonSecure, 3rd doorbell */
+                         <&mhuB 1 3>; /* HP-NonSecure, 4th doorbell */
+                mbox-names = "tx", "rx";
+                shmem = <&cpu_scp_hpri0>,
+                        <&cpu_scp_hpri1>;
+            };
         };
     };
+
+...
-- 
2.25.1