[PATCH 08/10] clk: imx: scu: Only save DC SS clock using non-cached clock rate
Dong Aisheng
aisheng.dong at nxp.com
Fri Jun 4 02:09:41 PDT 2021
From: Anson Huang <Anson.Huang at nxp.com>
Display sub-system has special clock settings in SCFW, the
bypassed clock is used instead of PLL in Linux kernel clock
tree, so when saving clock rate, need to save non-cached clock
rate for Display sub-system's bypass clocks, and other clocks
still use the cached clock rate which is with runtime PM ON.
Signed-off-by: Anson Huang <Anson.Huang at nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong at nxp.com>
---
drivers/clk/imx/clk-scu.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/imx/clk-scu.c b/drivers/clk/imx/clk-scu.c
index 9f7ad3ca1039..37919ffc46a2 100644
--- a/drivers/clk/imx/clk-scu.c
+++ b/drivers/clk/imx/clk-scu.c
@@ -547,7 +547,14 @@ static int __maybe_unused imx_clk_scu_suspend(struct device *dev)
(rsrc_id == IMX_SC_R_A72))
return 0;
- clk->rate = clk_hw_get_rate(&clk->hw);
+ /* DC SS needs to handle bypass clock using non-cached clock rate */
+ if (clk->rsrc_id == IMX_SC_R_DC_0_VIDEO0 ||
+ clk->rsrc_id == IMX_SC_R_DC_0_VIDEO1 ||
+ clk->rsrc_id == IMX_SC_R_DC_1_VIDEO0 ||
+ clk->rsrc_id == IMX_SC_R_DC_1_VIDEO1)
+ clk->rate = clk_scu_recalc_rate(&clk->hw, 0);
+ else
+ clk->rate = clk_hw_get_rate(&clk->hw);
clk->is_enabled = clk_hw_is_enabled(&clk->hw);
if (clk->rate)
--
2.25.1
More information about the linux-arm-kernel
mailing list