[PATCH v5 1/2] dt-bindings: imx6q-pcie: Add "vph-supply" for PHY supply voltageg

[Lorenzo Pieralisi]

On Fri, May 28, 2021 at 02:29:42PM +0800, Richard Zhu wrote:
> The i.MX8MQ PCIe PHY can use either a 1.8V or a 3.3V power supply.
> Add a "vph-supply" property to indicate which regulator supplies
> power for the PHY.
> 
> Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
> Reviewed-by: Lucas Stach <l.stach at pengutronix.de>
> ---
>  Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt | 3 +++
>  1 file changed, 3 insertions(+)

For DT bindings you must CC devicetree at vger.kernel.org, please resend.

Thanks,
Lorenzo

> diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> index de4b2baf91e8..d8971ab99274 100644
> --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> @@ -38,6 +38,9 @@ Optional properties:
>    The regulator will be enabled when initializing the PCIe host and
>    disabled either as part of the init process or when shutting down the
>    host.
> +- vph-supply: Should specify the regulator in charge of VPH one of the three
> +  PCIe PHY powers. This regulator can be supplied by both 1.8v and 3.3v voltage
> +  supplies.
>  
>  Additional required properties for imx6sx-pcie:
>  - clock names: Must include the following additional entries:
> -- 
> 2.17.1
>