[PATCH] remoteproc: imx_rproc: correct firmware reload

Peng Fan peng.fan at nxp.com
Tue Jun 1 23:05:39 PDT 2021


Bjorn, Mathieu

> Subject: Re: [PATCH] remoteproc: imx_rproc: correct firmware reload
> 
> On Tue 01 Jun 10:31 CDT 2021, Mathieu Poirier wrote:
> 
> > On Tue, Jun 01, 2021 at 06:29:39PM +0800, Peng Fan (OSS) wrote:
> > > From: Peng Fan <peng.fan at nxp.com>
> > >
> > > ENABLE_M4 should be set to 1 when loading code to TCM, otherwise you
> > > will not able to replace the firmware after you stop m4.
> > >
> > > Besides ENABLE_M4, we still need set SW_M4C_RST, because this bit
> > > will be automatically set with SW_M4C_NON_SCLR_RST set.
> > >
> > > Signed-off-by: Peng Fan <peng.fan at nxp.com>
> > > ---
> > >
> > > V1:
> > >  Although this is an fix, but it is not critical, patch is based on
> > >
> > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpa
> > >
> tchwork.kernel.org%2Fproject%2Flinux-remoteproc%2Fcover%2F162027412
> 3
> > >
> -1461-1-git-send-email-peng.fan%40oss.nxp.com%2F&data=04%7C01%
> 7C
> > >
> peng.fan%40nxp.com%7C471a7b81f5d44fc6f85b08d925165839%7C686ea1d
> 3bc2b
> > >
> 4c6fa92cd99c5c301635%7C0%7C0%7C637581600173592073%7CUnknown
> %7CTWFpbG
> > >
> Zsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6
> Mn
> > >
> 0%3D%7C1000&sdata=5JerdzsSmjZ%2Flowd3AXo3gmr6bdHM9DCg55kv
> UmTWQw%
> > > 3D&reserved=0
> > >
> > >  drivers/remoteproc/imx_rproc.c | 8 +++++---
> > >  1 file changed, 5 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/remoteproc/imx_rproc.c
> > > b/drivers/remoteproc/imx_rproc.c index cd2ca96a30e5..ce2ce42bee91
> > > 100644
> > > --- a/drivers/remoteproc/imx_rproc.c
> > > +++ b/drivers/remoteproc/imx_rproc.c
> > > @@ -33,7 +33,8 @@
> > >
> > >  #define IMX7D_M4_START			(IMX7D_ENABLE_M4 |
> IMX7D_SW_M4P_RST \
> > >  					 | IMX7D_SW_M4C_RST)
> > > -#define IMX7D_M4_STOP			(IMX7D_ENABLE_M4 |
> IMX7D_SW_M4C_NON_SCLR_RST)
> > > +#define IMX7D_M4_STOP			(IMX7D_ENABLE_M4 |
> IMX7D_SW_M4C_RST | \
> > > +					 IMX7D_SW_M4C_NON_SCLR_RST)
> > >
> > >  /* Address: 0x020D8000 */
> > >  #define IMX6SX_SRC_SCR			0x00
> > > @@ -44,7 +45,8 @@
> > >
> > >  #define IMX6SX_M4_START			(IMX6SX_ENABLE_M4 |
> IMX6SX_SW_M4P_RST \
> > >  					 | IMX6SX_SW_M4C_RST)
> > > -#define IMX6SX_M4_STOP			(IMX6SX_ENABLE_M4 |
> IMX6SX_SW_M4C_NON_SCLR_RST)
> > > +#define IMX6SX_M4_STOP			(IMX6SX_ENABLE_M4 |
> IMX6SX_SW_M4C_RST | \
> > > +					 IMX6SX_SW_M4C_NON_SCLR_RST)
> > >  #define IMX6SX_M4_RST_MASK		(IMX6SX_ENABLE_M4 |
> IMX6SX_SW_M4P_RST \
> > >  					 | IMX6SX_SW_M4C_NON_SCLR_RST \
> > >  					 | IMX6SX_SW_M4C_RST)
> > > @@ -691,7 +693,7 @@ static int imx_rproc_detect_mode(struct
> imx_rproc *priv)
> > >  		return ret;
> > >  	}
> > >
> > > -	if (!(val & dcfg->src_stop))
> > > +	if ((val & dcfg->src_mask) != dcfg->src_stop)
> > >  		priv->rproc->state = RPROC_DETACHED;
> >
> > Reviewed-by: Mathieu Poirier <mathieu.poirier at linaro.org>
> >
> > Bjorn hasn't picked up this set yet so it is best to send a v7 of [1]
> > with this change merged in it.
> >
> 
> Sorry I had missed that [1] was fully reviewed, so I figured I'll just apply the
> series and squash this in. But afaict this patch isn't a fix to any of the patches
> in [1].
> 
> More so, this patch doesn't apply on top of either v5.13-rc1, linux-next or [1] -
> because neither IMX7D_M4_STOP nor IMX6SX_M4_STOP has
> IMX6SX_ENABLE_M4 included.

I'll send v2 to avoid the conflict soon.

> 
> 
> Peng, I've applied [1] now, please let me know what to do about this patch.

Thanks,
Peng.

> 
> Regards,
> Bjorn
> 
> > Thanks,
> > Mathieu
> >
> > [1].
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatc
> >
> hwork.kernel.org%2Fproject%2Flinux-remoteproc%2Fcover%2F1620274123-
> 146
> >
> 1-1-git-send-email-peng.fan%40oss.nxp.com%2F&data=04%7C01%7Cpe
> ng.f
> >
> an%40nxp.com%7C471a7b81f5d44fc6f85b08d925165839%7C686ea1d3bc2b
> 4c6fa92c
> >
> d99c5c301635%7C0%7C0%7C637581600173592073%7CUnknown%7CTWFp
> bGZsb3d8eyJW
> >
> IjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C
> 1000&
> >
> amp;sdata=5JerdzsSmjZ%2Flowd3AXo3gmr6bdHM9DCg55kvUmTWQw%3D&
> amp;reserve
> > d=0
> >
> > >
> > >  	return 0;
> > > --
> > > 2.30.0
> > >



More information about the linux-arm-kernel mailing list