[PATCH 4/4] arm64: dts: imx8mm-venice-gw7901: enable pull-down on gpio outputs

[Tim Harvey]

Enable internal pull-down on UART transceiver GPIO config pins.

Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
 arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
index db43ee28bdb6..0216facb2aef 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
@@ -877,9 +877,9 @@
 
 	pinctrl_uart3_gpio: uart3gpiogrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6	0x40000041 /* RS232# */
-			MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7	0x40000041 /* RS422# */
-			MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8	0x40000041 /* RS485# */
+			MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6	0x40000110 /* RS232# */
+			MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7	0x40000110 /* RS422# */
+			MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8	0x40000110 /* RS485# */
 		>;
 	};
 
-- 
2.17.1