[PATCH 4/4] arm64: dts: imx8mm-venice-gw7901: enable pull-down on gpio outputs
Tim Harvey
tharvey at gateworks.com
Sat Jul 24 11:19:53 PDT 2021
On Tue, Jun 1, 2021 at 10:49 AM Tim Harvey <tharvey at gateworks.com> wrote:
>
> Enable internal pull-down on UART transceiver GPIO config pins.
>
> Signed-off-by: Tim Harvey <tharvey at gateworks.com>
> ---
> arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
> index db43ee28bdb6..0216facb2aef 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
> @@ -877,9 +877,9 @@
>
> pinctrl_uart3_gpio: uart3gpiogrp {
> fsl,pins = <
> - MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x40000041 /* RS232# */
> - MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000041 /* RS422# */
> - MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x40000041 /* RS485# */
> + MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x40000110 /* RS232# */
> + MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000110 /* RS422# */
> + MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x40000110 /* RS485# */
> >;
> };
>
> --
> 2.17.1
>
Shawn,
Is there anything you want changed here?
Best regards,
Tim
More information about the linux-arm-kernel
mailing list