[v2] irqchip: ls-extirq: add flag IRQCHIP_SKIP_SET_WAKE to remove call trace

[Marc Zyngier]

On 2021-01-29 02:55, Biwen Li (OSS) wrote:
>> -----Original Message-----
>> From: Marc Zyngier <maz at kernel.org>
>> Sent: 2021年1月28日 17:02
>> To: Biwen Li (OSS) <biwen.li at oss.nxp.com>
>> Cc: mark.rutland at arm.com; Leo Li <leoyang.li at nxp.com>; 
>> tglx at linutronix.de;
>> linux-kernel at vger.kernel.org; Jiafei Pan <jiafei.pan at nxp.com>;
>> linux-arm-kernel at lists.infradead.org; Ran Wang <ran.wang_1 at nxp.com>
>> Subject: Re: [v2] irqchip: ls-extirq: add flag IRQCHIP_SKIP_SET_WAKE 
>> to
>> remove call trace
>> 
>> On 2021-01-28 02:37, Biwen Li (OSS) wrote:
>> >> -----Original Message-----
>> >> From: Marc Zyngier <maz at kernel.org>
>> >> Sent: 2021年1月27日 19:38
>> >> To: Biwen Li (OSS) <biwen.li at oss.nxp.com>
>> >> Cc: mark.rutland at arm.com; Leo Li <leoyang.li at nxp.com>;
>> >> tglx at linutronix.de; jason at lakedaemon.net;
>> >> linux-kernel at vger.kernel.org; Jiafei Pan <jiafei.pan at nxp.com>;
>> >> linux-arm-kernel at lists.infradead.org; Ran Wang <ran.wang_1 at nxp.com>;
>> >> Biwen Li <biwen.li at nxp.com>
>> >> Subject: Re: [v2] irqchip: ls-extirq: add flag IRQCHIP_SKIP_SET_WAKE
>> >> to remove call trace
>> >>
>> >> On 2021-01-27 08:58, Biwen Li wrote:
>> >> > From: Biwen Li <biwen.li at nxp.com>
>> >> >
>> >> > Add flag IRQCHIP_SKIP_SET_WAKE to remove call trace as follow, ...
>> >> > [   45.605239] Unbalanced IRQ 120 wake disable
>> >> > [   45.609445] WARNING: CPU: 0 PID: 1124 at kernel/irq/manage.c:800
>> >> > irq_set_irq_wake+0x154/0x1a0
>> >> > ...
>> >> > [   45.645141] pstate: 60000085 (nZCv daIf -PAN -UAO -TCO BTYPE=--)
>> >> > [   45.651144] pc : irq_set_irq_wake+0x154/0x1a0
>> >> > [   45.655497] lr : irq_set_irq_wake+0x154/0x1a0
>> >> > ...
>> >> > [   45.742825] Call trace:
>> >> > [   45.745268]  irq_set_irq_wake+0x154/0x1a0
>> >> > [   45.749278]  ds3232_resume+0x38/0x50
>> >> >
>> >> > On ls2088ardb:
>> >> > In suspend progress(# echo mem > /sys/power/state),
>> >> >
>> >>
>> pm_suspend()->suspend_devices_and_enter()->dpm_suspend()->device_susp
>> >> e
>> >> > nd()
>> >> > ->ds3232_suspend()->enable_irq_wake()->irq_set_irq_wake()
>> >> > ->set_irq_wake_real(), return -ENXIO, there get
>> >> > "Cannot set wakeup source" in ds3232_suspend().
>> >> >
>> >> > In resume progress(wakeup by flextimer)
>> >> > dpm_resume_end()->dpm_resume()
>> >> > ->device_resume()->ds3232_resume()
>> >> > ->disable_irq_wake()->irq_set_irq_wake()
>> >> > ->set_irq_wake_real(), there get
>> >> > kernel call trace(Unbalanced IRQ 120 wake
>> >> > disable)
>> >>
>> >> This is again paraphrasing the stack trace instead of explaining the
>> >> problem it fixes. How about:
>> >>
>> >> "The ls-extirq driver doesn't implement the irq_set_wake()
>> >>   callback, while being wake-up capable. This results in
>> >>   ugly behaviours across suspend/resume cycles.
>> >>
>> >>   Advertise this by adding IRQCHIP_SKIP_SET_WAKE to the irqchip
>> >>   flags"
>> >>
>> >> The subject line should be fixed along the same lines, and a Fixes:
>> >> tag added.
>> > Okay, got it. Thanks. Will update in v3.
>> 
>> ... and v3 still doesn't have a Fixes: tag.
>> 
>> Frankly, if you can't be bothered to do this, why should I worry about 
>> your
>> platform being broken?
> Oh, sorry. Don't know how to add a fixes? Any suggestions? Thanks.

Please read Documentation/process/submitting-patches.rst, and specially
the section titled "Describe your changes".

In your cases, there are only two commits for this driver, so picking
the one that had a bug shouldn't be too hard.

Thanks,

         M.
-- 
Jazz is not dead. It just smells funny...