[PATCH v3 05/22] media: camss: Refactor VFE HW version support

Nicolas Boichat drinkcat at chromium.org
Wed Jan 27 19:18:57 EST 2021


On Wed, Jan 27, 2021 at 10:56 PM Robert Foss <robert.foss at linaro.org> wrote:
>
> In order to support Qualcomm ISP hardware architectures that diverge
> from older architectures, the VFE subdevice driver needs to be refactored
> to better abstract the different ISP architectures.
>
> Gen1 represents the CAMSS ISP architecture. The ISP architecture developed
> after CAMSS, Titan, will be referred to as Gen2.
>
> Signed-off-by: Robert Foss <robert.foss at linaro.org>
> ---
> [snip]
> diff --git a/drivers/media/platform/qcom/camss/camss-vfe-4-8.c b/drivers/media/platform/qcom/camss/camss-vfe-4-8.c
> new file mode 100644
> index 000000000000..153e0e20664e
> --- /dev/null
> +++ b/drivers/media/platform/qcom/camss/camss-vfe-4-8.c
> [snip]
> +/*
> + * vfe_isr - VFE module interrupt handler
> + * @irq: Interrupt line
> + * @dev: VFE device
> + *
> + * Return IRQ_HANDLED on success
> + */
> +static irqreturn_t vfe_isr(int irq, void *dev)
> +{
> +       struct vfe_device *vfe = dev;
> +       u32 value0, value1;
> +       int i, j;
> +
> +       vfe->ops->isr_read(vfe, &value0, &value1);
> +
> +       trace_printk("VFE: status0 = 0x%08x, status1 = 0x%08x\n",
> +                    value0, value1);

Please do not use trace_printk in production code [1,2], it is only
meant for debug use. Consider using trace events, or dev_dbg.

[1] https://elixir.bootlin.com/linux/v5.8/source/kernel/trace/trace.c#L3158
[2] https://elixir.bootlin.com/linux/v5.8/source/include/linux/kernel.h#L766

> [snip]



More information about the linux-arm-kernel mailing list