[PATCH] pinctrl: sunxi: fix use-after-free in sunxi_pmx_free()

[Maxime Ripard]

On Tue, Jan 26, 2021 at 04:03:29PM +0100, Linus Walleij wrote:
> On Tue, Jan 26, 2021 at 7:31 AM liu xiang <liu.xiang at zlingsmart.com> wrote:
> 
> > > Liu can you make a patch to Kconfig to just select REGULATOR?
> > > Possibly even the specific regulator driver this SoC is using
> > > if it is very specific for this purpose.
> >
> > I found that the regulator driver is related to the specific board, not the SoC.
> > There is no board config for ARM64 SoC like ARM.
> > Is a good idea to select the regulator driver in the pinctrl Konfig? Or just
> > select CONFIG_REGULATOR_FIXED_VOLTAGE to avoid the use-after-free warning?
> 
> If that regulator is what the board uses to satisfy this driver then that
> is what you should select. Write some blurb in the commit message
> about what is going on.
> 
> You can even add a comment in Kconfig like that:
> 
> # Needed to provide power to rails
> select REGULATOR_FIXED_VOLTAGE

Virtually all the boards will need a regulator, but you can't make the
assumption that this is the driver that is going to be used. In most
case, it isn't.

But it's not really a big deal, we depend on the framework itself being
enabled for regulator_get to return the proper error, not one given
driver.

Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20210126/dbf10e32/attachment.sig>