[PATCH v2 08/14] dt-bindings: display: bridge: Add i.MX8qxp pixel link to DPI binding

Liu Ying victor.liu at nxp.com
Tue Jan 26 04:00:41 EST 2021


On Mon, 2021-01-25 at 15:13 -0600, Rob Herring wrote:
> On Thu, Jan 14, 2021 at 05:22:06PM +0800, Liu Ying wrote:
> > This patch adds bindings for i.MX8qxp pixel link to DPI(PXL2DPI).
> > 
> > Signed-off-by: Liu Ying <victor.liu at nxp.com>
> > ---
> > v1->v2:
> > * Use graph schema. (Laurent)
> > 
> >  .../display/bridge/fsl,imx8qxp-pxl2dpi.yaml        | 105 +++++++++++++++++++++
> >  1 file changed, 105 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml
> > new file mode 100644
> > index 00000000..187824e
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml
> > @@ -0,0 +1,105 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fdisplay%2Fbridge%2Ffsl%2Cimx8qxp-pxl2dpi.yaml%23&data=04%7C01%7Cvictor.liu%40nxp.com%7C39b067c8005e4019ae6f08d8c1760c31%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637472060047200709%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=u7Hv3l5h%2FwAfl31GcfBntdxDXrAAM7XBxEwitTHo2Sc%3D&reserved=0
> > +$schema: https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=04%7C01%7Cvictor.liu%40nxp.com%7C39b067c8005e4019ae6f08d8c1760c31%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637472060047200709%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=sM%2F9h6GLwhim7LidsI6upQzly7NnZoTbal2YBGygnEE%3D&reserved=0
> > +
> > +title: Freescale i.MX8qxp Pixel Link to Display Pixel Interface
> > +
> > +maintainers:
> > +  - Liu Ying <victor.liu at nxp.com>
> > +
> > +description: |
> > +  The Freescale i.MX8qxp Pixel Link to Display Pixel Interface(PXL2DPI)
> > +  interfaces the pixel link 36-bit data output and the DSI controller’s
> > +  MIPI-DPI 24-bit data input, and inputs of LVDS Display Bridge(LDB) module
> > +  used in LVDS mode, to remap the pixel color codings between those modules.
> > +  This module is purely combinatorial.
> > +
> > +properties:
> > +  compatible:
> > +    const: fsl,imx8qxp-pxl2dpi
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  fsl,syscon:
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +    description: |
> > +      A phandle which points to Control and Status Registers(CSR) module.
> 
> If this is the only control interface, then make it a child node of the 
> phandle.

Will do.

Thanks,
Liu Ying

> 
> > +
> > +  fsl,companion-pxl2dpi:
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +    description: |
> > +      A phandle which points to companion PXL2DPI which is used by downstream
> > +      LVDS Display Bridge(LDB) in split mode.
> > +
> > +  ports:
> > +    $ref: /schemas/graph.yaml#/properties/ports
> > +
> > +    properties:
> > +      port at 0:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description: The PXL2DPI input port node from pixel link.
> > +
> > +      port at 1:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description: The PXL2DPI output port node to downstream bridge.
> > +
> > +    required:
> > +      - port at 0
> > +      - port at 1
> > +
> > +required:
> > +  - compatible
> > +  - power-domains
> > +  - fsl,syscon
> > +  - ports
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/firmware/imx/rsrc.h>
> > +    pxl2dpi {
> > +        compatible = "fsl,imx8qxp-pxl2dpi";
> > +        power-domains = <&pd IMX_SC_R_MIPI_0>;
> > +        fsl,syscon = <&mipi_lvds_0_csr>;
> > +
> > +        ports {
> > +            #address-cells = <1>;
> > +            #size-cells = <0>;
> > +
> > +            port at 0 {
> > +                #address-cells = <1>;
> > +                #size-cells = <0>;
> > +                reg = <0>;
> > +
> > +                mipi_lvds_0_pxl2dpi_dc_pixel_link0: endpoint at 0 {
> > +                    reg = <0>;
> > +                    remote-endpoint = <&dc_pixel_link0_mipi_lvds_0_pxl2dpi>;
> > +                };
> > +
> > +                mipi_lvds_0_pxl2dpi_dc_pixel_link1: endpoint at 1 {
> > +                     reg = <1>;
> > +                     remote-endpoint = <&dc_pixel_link1_mipi_lvds_0_pxl2dpi>;
> > +                };
> > +            };
> > +
> > +            port at 1 {
> > +                #address-cells = <1>;
> > +                #size-cells = <0>;
> > +                reg = <1>;
> > +
> > +                mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint at 0 {
> > +                    reg = <0>;
> > +                    remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>;
> > +                };
> > +
> > +                mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint at 1 {
> > +                    reg = <1>;
> > +                    remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>;
> > +                };
> > +            };
> > +        };
> > +    };
> > -- 
> > 2.7.4
> > 




More information about the linux-arm-kernel mailing list