[PATCH v2 0/5] arm64: Initial support for Texas Instruments AM642 Platform

[Grygorii Strashko]

On 21/01/2021 16:21, Nishanth Menon wrote:
> On 15:22-20210121, Grygorii Strashko wrote:
>>
>>
>> On 19/01/2021 18:39, Dave Gerlach wrote:
>>> This is v2 of the series to add initial support for the latest new SoC,
>>> AM642, from Texas Instruments. Version 1 can be found at [1]. Additional
>>> detail can be found in the patch descriptions, also see AM64X Technical
>>> Reference Manual (SPRUIM2, Nov 2020) for further details:
>>> https://www.ti.com/lit/pdf/spruim2
>>>
>>> Since v1, several new bindings have made it in linux-next so we can
>>> now include those nodes using them here. The spi, i2c, and mmc nodes
>>> have now been added along with DMA support. Specifics about changes
>>> from v1 are included with each patch.
>>>
>>> Regards,
>>> Dave
>>>
>>> [1] https://lore.kernel.org/linux-arm-kernel/20201125052004.17823-1-d-gerlach@ti.com/
>>>
>>> Dave Gerlach (4):
>>>     dt-bindings: arm: ti: Add bindings for AM642 SoC
>>>     dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64
>>>     arm64: dts: ti: Add support for AM642 SoC
>>>     arm64: dts: ti: Add support for AM642 EVM
>>>
>>> Peter Ujfalusi (1):
>>>     arm64: dts: ti: k3-am64-main: Enable DMA support
>>>
>>>    .../devicetree/bindings/arm/ti/k3.yaml        |   6 +
>>>    arch/arm64/boot/dts/ti/Makefile               |   2 +
>>>    arch/arm64/boot/dts/ti/k3-am64-main.dtsi      | 406 ++++++++++++++++++
>>>    arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi       |  76 ++++
>>>    arch/arm64/boot/dts/ti/k3-am64.dtsi           | 103 +++++
>>>    arch/arm64/boot/dts/ti/k3-am642-evm.dts       | 258 +++++++++++
>>>    arch/arm64/boot/dts/ti/k3-am642.dtsi          |  65 +++
>>>    include/dt-bindings/pinctrl/k3.h              |   5 +-
>>>    8 files changed, 920 insertions(+), 1 deletion(-)
>>>    create mode 100644 arch/arm64/boot/dts/ti/k3-am64-main.dtsi
>>>    create mode 100644 arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
>>>    create mode 100644 arch/arm64/boot/dts/ti/k3-am64.dtsi
>>>    create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm.dts
>>>    create mode 100644 arch/arm64/boot/dts/ti/k3-am642.dtsi
>>>
>>
>> Tested-by: Grygorii Strashko <grygorii.strashko at ti.com>
>> Reviewed-by: Grygorii Strashko <grygorii.strashko at ti.com>
>>
> 
> Can you see if your reviews and tested apply to V3 of the series as well?
> 
> 	https://lore.kernel.org/linux-arm-kernel/20210120202532.9011-1-d-gerlach@ti.com/
> 

Yes. They do apply.

-- 
Best regards,
grygorii