[PATCH v2 0/5] arm64: Initial support for Texas Instruments AM642 Platform

[Grygorii Strashko]

On 19/01/2021 18:39, Dave Gerlach wrote:
> This is v2 of the series to add initial support for the latest new SoC,
> AM642, from Texas Instruments. Version 1 can be found at [1]. Additional
> detail can be found in the patch descriptions, also see AM64X Technical
> Reference Manual (SPRUIM2, Nov 2020) for further details:
> https://www.ti.com/lit/pdf/spruim2
> 
> Since v1, several new bindings have made it in linux-next so we can
> now include those nodes using them here. The spi, i2c, and mmc nodes
> have now been added along with DMA support. Specifics about changes
> from v1 are included with each patch.
> 
> Regards,
> Dave
> 
> [1] https://lore.kernel.org/linux-arm-kernel/20201125052004.17823-1-d-gerlach@ti.com/
> 
> Dave Gerlach (4):
>    dt-bindings: arm: ti: Add bindings for AM642 SoC
>    dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64
>    arm64: dts: ti: Add support for AM642 SoC
>    arm64: dts: ti: Add support for AM642 EVM
> 
> Peter Ujfalusi (1):
>    arm64: dts: ti: k3-am64-main: Enable DMA support
> 
>   .../devicetree/bindings/arm/ti/k3.yaml        |   6 +
>   arch/arm64/boot/dts/ti/Makefile               |   2 +
>   arch/arm64/boot/dts/ti/k3-am64-main.dtsi      | 406 ++++++++++++++++++
>   arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi       |  76 ++++
>   arch/arm64/boot/dts/ti/k3-am64.dtsi           | 103 +++++
>   arch/arm64/boot/dts/ti/k3-am642-evm.dts       | 258 +++++++++++
>   arch/arm64/boot/dts/ti/k3-am642.dtsi          |  65 +++
>   include/dt-bindings/pinctrl/k3.h              |   5 +-
>   8 files changed, 920 insertions(+), 1 deletion(-)
>   create mode 100644 arch/arm64/boot/dts/ti/k3-am64-main.dtsi
>   create mode 100644 arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
>   create mode 100644 arch/arm64/boot/dts/ti/k3-am64.dtsi
>   create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm.dts
>   create mode 100644 arch/arm64/boot/dts/ti/k3-am642.dtsi
> 

Tested-by: Grygorii Strashko <grygorii.strashko at ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko at ti.com>

-- 
Best regards,
grygorii