[PATCH v2 15/22] dt-bindings: media: camss: Add qcom, sdm660-camss binding

Robert Foss robert.foss at linaro.org
Thu Jan 21 05:35:20 EST 2021


Due to the dt-bindings supporting sdm660-camss, this patch depends
the sdm660 clock driver being upstreamed.

SDM630/660 Multimedia and GPU clock controllers
https://lkml.org/lkml/2020/9/26/166

On Wed, 20 Jan 2021 at 14:44, Robert Foss <robert.foss at linaro.org> wrote:
>
> Add bindings for qcom,sdm660-camss in order to support the camera
> subsystem on SDM630/660 and SDA variants.
>
> Signed-off-by: Robert Foss <robert.foss at linaro.org>
> ---
>
> Changes since v1:
>  - Laurent: Reworked driver to use dtschema
>
>
>  .../bindings/media/qcom,sdm660-camss.yaml     | 416 ++++++++++++++++++
>  1 file changed, 416 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
> new file mode 100644
> index 000000000000..105ce84f9b71
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
> @@ -0,0 +1,416 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/media/qcom,sdm660-camss.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Qualcomm CAMSS ISP
> +
> +maintainers:
> +  - Robert Foss <robert.foss at linaro.org>
> +  - Todor Tomov <todor.too at gmail.com>
> +
> +description: |
> +  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
> +
> +properties:
> +  compatible:
> +    const: qcom,sdm660-camss
> +
> +  clocks:
> +    description:
> +      Input clocks for the hardware block.
> +    minItems: 42
> +    maxItems: 42
> +
> +  clock-names:
> +    description:
> +      Names of input clocks for the hardware block.
> +    items:
> +      - const: ahb
> +      - const: cphy_csid0
> +      - const: cphy_csid1
> +      - const: cphy_csid2
> +      - const: cphy_csid3
> +      - const: csi0_ahb
> +      - const: csi0
> +      - const: csi0_phy
> +      - const: csi0_pix
> +      - const: csi0_rdi
> +      - const: csi1_ahb
> +      - const: csi1
> +      - const: csi1_phy
> +      - const: csi1_pix
> +      - const: csi1_rdi
> +      - const: csi2_ahb
> +      - const: csi2
> +      - const: csi2_phy
> +      - const: csi2_pix
> +      - const: csi2_rdi
> +      - const: csi3_ahb
> +      - const: csi3
> +      - const: csi3_phy
> +      - const: csi3_pix
> +      - const: csi3_rdi
> +      - const: csiphy0_timer
> +      - const: csiphy1_timer
> +      - const: csiphy2_timer
> +      - const: csiphy_ahb2crif
> +      - const: csi_vfe0
> +      - const: csi_vfe1
> +      - const: ispif_ahb
> +      - const: throttle_axi
> +      - const: top_ahb
> +      - const: vfe0_ahb
> +      - const: vfe0
> +      - const: vfe0_stream
> +      - const: vfe1_ahb
> +      - const: vfe1
> +      - const: vfe1_stream
> +      - const: vfe_ahb
> +      - const: vfe_axi
> +
> +  interrupts:
> +    description:
> +      IRQs for the hardware block.
> +    minItems: 10
> +    maxItems: 10
> +
> +  interrupt-names:
> +    description:
> +      Names of IRQs for the hardware block.
> +    items:
> +      - const: csid0
> +      - const: csid1
> +      - const: csid2
> +      - const: csid3
> +      - const: csiphy0
> +      - const: csiphy1
> +      - const: csiphy2
> +      - const: ispif
> +      - const: vfe0
> +      - const: vfe1
> +
> +  iommus:
> +    maxItems: 4
> +
> +  power-domains:
> +    maxItems: 2
> +
> +  ports:
> +    description:
> +      The CSI data input ports.
> +
> +    type: object
> +
> +    properties:
> +      port at 0:
> +        type: object
> +        description: Input node for receiving CSI data.
> +        properties:
> +          endpoint:
> +            type: object
> +
> +            properties:
> +              clock-lanes:
> +                description: |-
> +                  The physical clock lane index.
> +
> +              data-lanes:
> +                description: |-
> +                  An array of physical data lanes indexes.
> +                  Position of an entry determines the logical
> +                  lane number, while the value of an entry
> +                  indicates physical lane index.
> +
> +            required:
> +              - clock-lanes
> +              - data-lanes
> +
> +        required:
> +          - endpoint
> +          - reg
> +
> +      port at 1:
> +        type: object
> +        description: Input node for receiving CSI data.
> +        properties:
> +          endpoint:
> +            type: object
> +
> +            properties:
> +              clock-lanes:
> +                description: |-
> +                  The physical clock lane index.
> +
> +              data-lanes:
> +                description: |-
> +                  An array of physical data lanes indexes.
> +                  Position of an entry determines the logical
> +                  lane number, while the value of an entry
> +                  indicates physical lane index.
> +
> +            required:
> +              - clock-lanes
> +              - data-lanes
> +
> +        required:
> +          - endpoint
> +          - reg
> +
> +      port at 2:
> +        type: object
> +        description: Input node for receiving CSI data.
> +        properties:
> +          endpoint:
> +            type: object
> +
> +            properties:
> +              clock-lanes:
> +                description: |-
> +                  The physical clock lane index.
> +
> +              data-lanes:
> +                description: |-
> +                  An array of physical data lanes indexes.
> +                  Position of an entry determines the logical
> +                  lane number, while the value of an entry
> +                  indicates physical lane index.
> +
> +            required:
> +              - clock-lanes
> +              - data-lanes
> +
> +        required:
> +          - endpoint
> +          - reg
> +
> +      port at 3:
> +        type: object
> +        description: Input node for receiving CSI data.
> +        properties:
> +          endpoint:
> +            type: object
> +
> +            properties:
> +              clock-lanes:
> +                description: |-
> +                  The physical clock lane index.
> +
> +              data-lanes:
> +                description: |-
> +                  An array of physical data lanes indexes.
> +                  Position of an entry determines the logical
> +                  lane number, while the value of an entry
> +                  indicates physical lane index.
> +
> +            required:
> +              - clock-lanes
> +              - data-lanes
> +
> +        required:
> +          - endpoint
> +          - reg
> +
> +  reg:
> +    minItems: 14
> +    maxItems: 14
> +
> +  reg-names:
> +    items:
> +      - const: csi_clk_mux
> +      - const: csid0
> +      - const: csid1
> +      - const: csid2
> +      - const: csid3
> +      - const: csiphy0
> +      - const: csiphy0_clk_mux
> +      - const: csiphy1
> +      - const: csiphy1_clk_mux
> +      - const: csiphy2
> +      - const: csiphy2_clk_mux
> +      - const: ispif
> +      - const: vfe0
> +      - const: vfe1
> +
> +  vdda-supply:
> +    description:
> +      Definition of the regulator used as analog power supply.
> +
> +required:
> +  - clock-names
> +  - clocks
> +  - compatible
> +  - interrupt-names
> +  - interrupts
> +  - iommus
> +  - power-domains
> +  - reg
> +  - reg-names
> +  - vdda-supply
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/qcom,gcc-sdm660.h>
> +    #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
> +
> +    camss: camss at ca00000 {
> +      compatible = "qcom,sdm660-camss";
> +
> +      clocks = <&mmcc CAMSS_AHB_CLK>,
> +        <&mmcc CAMSS_CPHY_CSID0_CLK>,
> +        <&mmcc CAMSS_CPHY_CSID1_CLK>,
> +        <&mmcc CAMSS_CPHY_CSID2_CLK>,
> +        <&mmcc CAMSS_CPHY_CSID3_CLK>,
> +        <&mmcc CAMSS_CSI0_AHB_CLK>,
> +        <&mmcc CAMSS_CSI0_CLK>,
> +        <&mmcc CAMSS_CPHY_CSID0_CLK>,
> +        <&mmcc CAMSS_CSI0PIX_CLK>,
> +        <&mmcc CAMSS_CSI0RDI_CLK>,
> +        <&mmcc CAMSS_CSI1_AHB_CLK>,
> +        <&mmcc CAMSS_CSI1_CLK>,
> +        <&mmcc CAMSS_CPHY_CSID1_CLK>,
> +        <&mmcc CAMSS_CSI1PIX_CLK>,
> +        <&mmcc CAMSS_CSI1RDI_CLK>,
> +        <&mmcc CAMSS_CSI2_AHB_CLK>,
> +        <&mmcc CAMSS_CSI2_CLK>,
> +        <&mmcc CAMSS_CPHY_CSID2_CLK>,
> +        <&mmcc CAMSS_CSI2PIX_CLK>,
> +        <&mmcc CAMSS_CSI2RDI_CLK>,
> +        <&mmcc CAMSS_CSI3_AHB_CLK>,
> +        <&mmcc CAMSS_CSI3_CLK>,
> +        <&mmcc CAMSS_CPHY_CSID3_CLK>,
> +        <&mmcc CAMSS_CSI3PIX_CLK>,
> +        <&mmcc CAMSS_CSI3RDI_CLK>,
> +        <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
> +        <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
> +        <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
> +        <&mmcc CSIPHY_AHB2CRIF_CLK>,
> +        <&mmcc CAMSS_CSI_VFE0_CLK>,
> +        <&mmcc CAMSS_CSI_VFE1_CLK>,
> +        <&mmcc CAMSS_ISPIF_AHB_CLK>,
> +        <&mmcc THROTTLE_CAMSS_AXI_CLK>,
> +        <&mmcc CAMSS_TOP_AHB_CLK>,
> +        <&mmcc CAMSS_VFE0_AHB_CLK>,
> +        <&mmcc CAMSS_VFE0_CLK>,
> +        <&mmcc CAMSS_VFE0_STREAM_CLK>,
> +        <&mmcc CAMSS_VFE1_AHB_CLK>,
> +        <&mmcc CAMSS_VFE1_CLK>,
> +        <&mmcc CAMSS_VFE1_STREAM_CLK>,
> +        <&mmcc CAMSS_VFE_VBIF_AHB_CLK>,
> +        <&mmcc CAMSS_VFE_VBIF_AXI_CLK>;
> +
> +      clock-names = "ahb",
> +        "cphy_csid0",
> +        "cphy_csid1",
> +        "cphy_csid2",
> +        "cphy_csid3",
> +        "csi0_ahb",
> +        "csi0",
> +        "csi0_phy",
> +        "csi0_pix",
> +        "csi0_rdi",
> +        "csi1_ahb",
> +        "csi1",
> +        "csi1_phy",
> +        "csi1_pix",
> +        "csi1_rdi",
> +        "csi2_ahb",
> +        "csi2",
> +        "csi2_phy",
> +        "csi2_pix",
> +        "csi2_rdi",
> +        "csi3_ahb",
> +        "csi3",
> +        "csi3_phy",
> +        "csi3_pix",
> +        "csi3_rdi",
> +        "csiphy0_timer",
> +        "csiphy1_timer",
> +        "csiphy2_timer",
> +        "csiphy_ahb2crif",
> +        "csi_vfe0",
> +        "csi_vfe1",
> +        "ispif_ahb",
> +        "throttle_axi",
> +        "top_ahb",
> +        "vfe0_ahb",
> +        "vfe0",
> +        "vfe0_stream",
> +        "vfe1_ahb",
> +        "vfe1",
> +        "vfe1_stream",
> +        "vfe_ahb",
> +        "vfe_axi";
> +
> +      interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
> +        <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
> +        <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
> +        <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
> +        <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
> +        <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
> +        <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
> +        <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
> +        <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
> +        <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
> +
> +      interrupt-names = "csid0",
> +        "csid1",
> +        "csid2",
> +        "csid3",
> +        "csiphy0",
> +        "csiphy1",
> +        "csiphy2",
> +        "ispif",
> +        "vfe0",
> +        "vfe1";
> +
> +      iommus = <&mmss_smmu 0xc00>,
> +        <&mmss_smmu 0xc01>,
> +        <&mmss_smmu 0xc02>,
> +        <&mmss_smmu 0xc03>;
> +
> +      power-domains = <&mmcc CAMSS_VFE0_GDSC>,
> +        <&mmcc CAMSS_VFE1_GDSC>;
> +
> +      reg = <0x0ca00020 0x10>,
> +        <0x0ca30000 0x100>,
> +        <0x0ca30400 0x100>,
> +        <0x0ca30800 0x100>,
> +        <0x0ca30c00 0x100>,
> +        <0x0c824000 0x1000>,
> +        <0x0ca00120 0x4>,
> +        <0x0c825000 0x1000>,
> +        <0x0ca00124 0x4>,
> +        <0x0c826000 0x1000>,
> +        <0x0ca00128 0x4>,
> +        <0x0ca31000 0x500>,
> +        <0x0ca10000 0x1000>,
> +        <0x0ca14000 0x1000>;
> +
> +      reg-names = "csi_clk_mux",
> +        "csid0",
> +        "csid1",
> +        "csid2",
> +        "csid3",
> +        "csiphy0",
> +        "csiphy0_clk_mux",
> +        "csiphy1",
> +        "csiphy1_clk_mux",
> +        "csiphy2",
> +        "csiphy2_clk_mux",
> +        "ispif",
> +        "vfe0",
> +        "vfe1";
> +
> +      vdda-supply = <&reg_2v8>;
> +
> +      ports {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +      };
> +    };
> --
> 2.27.0
>



More information about the linux-arm-kernel mailing list