[PATCH v2 00/12] arm64: dts: zynqmp: DT updates to match latest drivers

Michal Simek michal.simek at xilinx.com
Thu Jan 21 05:26:48 EST 2021


Hi,

I am sending this series to reflect the latest drivers which have been
merged to mainline kernel. I have boot it on zcu102-rev1.0 and also
zcu104-rev1.0. That's why I have also added DT for this newer revision.

The series is based on https://github.com/Xilinx/linux-xlnx/tree/zynqmp/dt.
And mio-bank patch requires update in dt-binding which has been posted here
https://lore.kernel.org/r/5fa17dfe4b42abefd84b4cbb7b8bcd4d31398f40.1606914986.git.michal.simek@xilinx.com

Thanks,
Michal

Changes in v2:
- Remove reset description for IPs from this patch. IPs will be enabled
  separately with DT binding update.
- Change patch subject

Michal Simek (12):
  arm64: dts: zynqmp: Fix u48 si5382 chip on zcu111
  arm64: dts: zynqmp: Add DT description for si5328 for zcu102/zcu106
  arm64: dts: zynqmp: Enable si5341 driver for zcu102/106/111
  arm64: dts: zynqmp: Enable reset controller driver
  arm64: dts: zynqmp: Enable phy driver for Sata on zcu102/zcu104/zcu106
  arm64: dts: zynqmp: Add label for zynqmp_ipi
  arm64: dts: zynqmp: Add missing mio-bank properties to sdhcis
  arm64: dts: zynqmp: Wire arasan nand controller
  arm64: dts: zynqmp: Wire zynqmp qspi controller
  arm64: dts: zynqmp: Add missing lpd watchdog node
  arm64: dts: zynqmp: Add missing iommu IDs
  arm64: dts: zynqmp: Add description for zcu104 revC

 arch/arm64/boot/dts/xilinx/Makefile           |   1 +
 .../arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi |  12 +
 .../boot/dts/xilinx/zynqmp-zcu100-revC.dts    |   2 +
 .../boot/dts/xilinx/zynqmp-zcu102-revA.dts    |  84 +++++-
 .../boot/dts/xilinx/zynqmp-zcu104-revA.dts    |  29 ++
 .../boot/dts/xilinx/zynqmp-zcu104-revC.dts    | 282 ++++++++++++++++++
 .../boot/dts/xilinx/zynqmp-zcu106-revA.dts    |  78 +++++
 .../boot/dts/xilinx/zynqmp-zcu111-revA.dts    |  59 +++-
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi        |  94 +++++-
 9 files changed, 637 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts

-- 
2.30.0




More information about the linux-arm-kernel mailing list