[PATCH] arm64: dts: rockchip: Light "sys" LED on NanoPi R2S

Robin Murphy robin.murphy at arm.com
Wed Jan 20 19:00:13 EST 2021


Set NanoPi R2S's "sys" LED to be on by default. This matches the
behaviour of the stock FriendlyWRT image, and makes it much easier
to tell when the thing has finished booting.

Suitable triggers for the two network LEDs cannot realistically be
configured from DT, so leave them be.

Signed-off-by: Robin Murphy <robin.murphy at arm.com>
---
 arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
index 1eecad724f04..5d794778aad1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
@@ -50,6 +50,7 @@
 		sys_led: led-1 {
 			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
 			label = "nanopi-r2s:red:sys";
+			default-state = "on";
 		};
 
 		wan_led: led-2 {
-- 
2.17.1




More information about the linux-arm-kernel mailing list