[PATCH v10 3/3] net: ax88796c: ASIX AX88796C SPI Ethernet Adapter Driver
Andrew Lunn
andrew at lunn.ch
Wed Jan 20 14:44:16 EST 2021
On Wed, Jan 20, 2021 at 08:30:14PM +0100, Lukasz Stelmach wrote:
> It was <2021-01-15 pią 17:27>, when Jakub Kicinski wrote:
> > On Wed, 13 Jan 2021 19:40:28 +0100 Łukasz Stelmach wrote:
> >> ASIX AX88796[1] is a versatile ethernet adapter chip, that can be
> >> connected to a CPU with a 8/16-bit bus or with an SPI. This driver
> >> supports SPI connection.
> >>
> >> The driver has been ported from the vendor kernel for ARTIK5[2]
> >> boards. Several changes were made to adapt it to the current kernel
> >> which include:
> >>
> >> + updated DT configuration,
> >> + clock configuration moved to DT,
> >> + new timer, ethtool and gpio APIs,
> >> + dev_* instead of pr_* and custom printk() wrappers,
> >> + removed awkward vendor power managemtn.
> >> + introduced ethtool tunable to control SPI compression
> >>
>
> [...]
>
> >>
> >> The other ax88796 driver is for NE2000 compatible AX88796L chip. These
> >> chips are not compatible. Hence, two separate drivers are required.
> >>
> >> Signed-off-by: Łukasz Stelmach <l.stelmach at samsung.com>
> >> Reviewed-by: Andrew Lunn <andrew at lunn.ch>
> >
> >> +static u32 ax88796c_get_priv_flags(struct net_device *ndev)
> >> +{
> >> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
> >> +
> >> + return ax_local->priv_flags;
> >
> > stray indent
> >
> >> +}
>
> Done.
>
> >> +#define MAX(x,y) ((x) > (y) ? (x) : (y))
> >
> > Please use the standard linux max / max_t macros.
>
> Done.
>
> >> +static struct sk_buff *
> >> +ax88796c_tx_fixup(struct net_device *ndev, struct sk_buff_head *q)
> >> +{
> >> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
> >> + u8 spi_len = ax_local->ax_spi.comp ? 1 : 4;
> >> + struct sk_buff *skb;
> >> + struct tx_pkt_info *info;
> >> + struct skb_data *entry;
> >> + u16 pkt_len;
> >> + u8 padlen, seq_num;
> >> + u8 need_pages;
> >> + int headroom;
> >> + int tailroom;
> >> +
> >> + if (skb_queue_empty(q))
> >> + return NULL;
> >> +
> >> + skb = skb_peek(q);
> >> + pkt_len = skb->len;
> >> + need_pages = (pkt_len + TX_OVERHEAD + 127) >> 7;
> >> + if (ax88796c_check_free_pages(ax_local, need_pages) != 0)
> >> + return NULL;
> >> +
> >> + headroom = skb_headroom(skb);
> >> + tailroom = skb_tailroom(skb);
> >> + padlen = round_up(pkt_len, 4) - pkt_len;
> >> + seq_num = ++ax_local->seq_num & 0x1F;
> >> +
> >> + info = (struct tx_pkt_info *)skb->cb;
> >> + info->pkt_len = pkt_len;
> >> +
> >> + if (skb_cloned(skb) ||
> >> + (headroom < (TX_OVERHEAD + spi_len)) ||
> >> + (tailroom < (padlen + TX_EOP_SIZE))) {
> >> + size_t h = MAX((TX_OVERHEAD + spi_len) - headroom,0);
> >> + size_t t = MAX((padlen + TX_EOP_SIZE) - tailroom,0);
> >> +
> >> + if (pskb_expand_head(skb, h, t, GFP_KERNEL))
> >> + return NULL;
> >> + }
> >> +
> >> + info->seq_num = seq_num;
> >> + ax88796c_proc_tx_hdr(info, skb->ip_summed);
> >> +
> >> + /* SOP and SEG header */
> >> + memcpy(skb_push(skb, TX_OVERHEAD), &info->sop, TX_OVERHEAD);
> >
> > why use skb->cb to store info? why not declare it on the stack?
> >
>
> Done.
>
> >> + /* Write SPI TXQ header */
> >> + memcpy(skb_push(skb, spi_len), ax88796c_tx_cmd_buf, spi_len);
> >> +
> >> + /* Make 32-bit alignment */
> >> + skb_put(skb, padlen);
> >> +
> >> + /* EOP header */
> >> + memcpy(skb_put(skb, TX_EOP_SIZE), &info->eop, TX_EOP_SIZE);
> >> +
> >> + skb_unlink(skb, q);
> >> +
> >> + entry = (struct skb_data *)skb->cb;
> >> + memset(entry, 0, sizeof(*entry));
> >> + entry->len = pkt_len;
> >> +
> >> + if (netif_msg_pktdata(ax_local)) {
> >> + char pfx[IFNAMSIZ + 7];
> >> +
> >> + snprintf(pfx, sizeof(pfx), "%s: ", ndev->name);
> >> +
> >> + netdev_info(ndev, "TX packet len %d, total len %d, seq %d\n",
> >> + pkt_len, skb->len, seq_num);
> >> +
> >> + netdev_info(ndev, " SPI Header:\n");
> >> + print_hex_dump(KERN_INFO, pfx, DUMP_PREFIX_OFFSET, 16, 1,
> >> + skb->data, 4, 0);
> >> +
> >> + netdev_info(ndev, " TX SOP:\n");
> >> + print_hex_dump(KERN_INFO, pfx, DUMP_PREFIX_OFFSET, 16, 1,
> >> + skb->data + 4, TX_OVERHEAD, 0);
> >> +
> >> + netdev_info(ndev, " TX packet:\n");
> >> + print_hex_dump(KERN_INFO, pfx, DUMP_PREFIX_OFFSET, 16, 1,
> >> + skb->data + 4 + TX_OVERHEAD,
> >> + skb->len - TX_EOP_SIZE - 4 - TX_OVERHEAD, 0);
> >> +
> >> + netdev_info(ndev, " TX EOP:\n");
> >> + print_hex_dump(KERN_INFO, pfx, DUMP_PREFIX_OFFSET, 16, 1,
> >> + skb->data + skb->len - 4, 4, 0);
> >> + }
> >> +
> >> + return skb;
> >> +}
> >> +
> >> +static int ax88796c_hard_xmit(struct ax88796c_device *ax_local)
> >> +{
> >> + struct sk_buff *tx_skb;
> >> + struct skb_data *entry;
> >> +
> >> + WARN_ON(!mutex_is_locked(&ax_local->spi_lock));
> >> +
> >> + tx_skb = ax88796c_tx_fixup(ax_local->ndev, &ax_local->tx_wait_q);
> >> +
> >> + if (!tx_skb)
> >> + return 0;
> >
> > tx_dropped++ ?
> >
>
> Done.
>
> >> + entry = (struct skb_data *)tx_skb->cb;
> >> +
> >> + AX_WRITE(&ax_local->ax_spi,
> >> + (TSNR_TXB_START | TSNR_PKT_CNT(1)), P0_TSNR);
> >> +
> >> + axspi_write_txq(&ax_local->ax_spi, tx_skb->data, tx_skb->len);
> >> +
> >> + if (((AX_READ(&ax_local->ax_spi, P0_TSNR) & TXNR_TXB_IDLE) == 0) ||
> >> + ((ISR_TXERR & AX_READ(&ax_local->ax_spi, P0_ISR)) != 0)) {
> >> + /* Ack tx error int */
> >> + AX_WRITE(&ax_local->ax_spi, ISR_TXERR, P0_ISR);
> >> +
> >> + ax_local->stats.tx_dropped++;
> >> +
> >> + netif_err(ax_local, tx_err, ax_local->ndev,
> >> + "TX FIFO error, re-initialize the TX bridge\n");
> >
> > rate limit
> >
>
> Done.
>
> >> + /* Reinitial tx bridge */
> >> + AX_WRITE(&ax_local->ax_spi, TXNR_TXB_REINIT |
> >> + AX_READ(&ax_local->ax_spi, P0_TSNR), P0_TSNR);
> >> + ax_local->seq_num = 0;
> >> + } else {
> >> + ax_local->stats.tx_packets++;
> >> + ax_local->stats.tx_bytes += entry->len;
> >> + }
> >> +
> >> + entry->state = tx_done;
> >> + dev_kfree_skb(tx_skb);
> >
> > dev_consume_skb() is better in cases the xmission was correct.
> > kfree_skb() shows up in packet drop monitor.
> >
>
> This one is OK as it is because
>
> 1. dev_kfree_skb() is consume_skb()
>
> include/linux/skbuff.h:#define dev_kfree_skb(a) consume_skb(a)
>
> 2. dev_consume_skb() does not exist. There are dev_consume_skb_irq() and
> dev_consume_skb_any(). The former can be used in IRQs, the latter
> anywher and de facto calls the former if in IRQ. If not, it calls
> dev_kfree_skb() (see above)
>
> 3. Last but not least. kfree_skb() and consume_skb() become the same
> without CONFIG_TRACEPOINTS (commit be769db2f958).
>
> >> +
> >> + return 1;
> >> +}
> >
> >> +static void
> >> +ax88796c_skb_return(struct ax88796c_device *ax_local, struct sk_buff *skb,
> >> + struct rx_header *rxhdr)
> >> +{
> >> + struct net_device *ndev = ax_local->ndev;
> >> + int status;
> >> +
> >> + do {
> >> + if (!(ndev->features & NETIF_F_RXCSUM))
> >> + break;
> >> +
> >> + /* checksum error bit is set */
> >> + if ((rxhdr->flags & RX_HDR3_L3_ERR) ||
> >> + (rxhdr->flags & RX_HDR3_L4_ERR))
> >> + break;
> >> +
> >> + /* Other types may be indicated by more than one bit. */
> >> + if ((rxhdr->flags & RX_HDR3_L4_TYPE_TCP) ||
> >> + (rxhdr->flags & RX_HDR3_L4_TYPE_UDP))
> >> + skb->ip_summed = CHECKSUM_UNNECESSARY;
> >> + } while (0);
> >> +
> >> + ax_local->stats.rx_packets++;
> >> + ax_local->stats.rx_bytes += skb->len;
> >> + skb->dev = ndev;
> >> +
> >> + skb->protocol = eth_type_trans(skb, ax_local->ndev);
> >> +
> >> + netif_info(ax_local, rx_status, ndev, "< rx, len %zu, type 0x%x\n",
> >> + skb->len + sizeof(struct ethhdr), skb->protocol);
> >> +
> >> + status = netif_rx_ni(skb);
> >> + if (status != NET_RX_SUCCESS)
> >> + netif_info(ax_local, rx_err, ndev,
> >> + "netif_rx status %d\n", status);
> >
> > rate limit
> >
>
> Done.
>
> >> +}
> >> +
> >> +static void
> >> +ax88796c_rx_fixup(struct ax88796c_device *ax_local, struct sk_buff *rx_skb)
> >> +{
> >> + struct rx_header *rxhdr = (struct rx_header *)rx_skb->data;
> >> + struct net_device *ndev = ax_local->ndev;
> >> + u16 len;
> >> +
> >> + be16_to_cpus(&rxhdr->flags_len);
> >> + be16_to_cpus(&rxhdr->seq_lenbar);
> >> + be16_to_cpus(&rxhdr->flags);
> >> +
> >> + if (((rxhdr->flags_len) & RX_HDR1_PKT_LEN) !=
> >> + (~(rxhdr->seq_lenbar) & 0x7FF)) {
> >
> > Lots of unnecessary parenthesis.
> >
>
> Done.
>
> >> + netif_err(ax_local, rx_err, ndev, "Header error\n");
> >> +
> >> + ax_local->stats.rx_frame_errors++;
> >> + kfree_skb(rx_skb);
> >> + return;
> >> + }
> >> +
> >> + if ((rxhdr->flags_len & RX_HDR1_MII_ERR) ||
> >> + (rxhdr->flags_len & RX_HDR1_CRC_ERR)) {
> >> + netif_err(ax_local, rx_err, ndev, "CRC or MII error\n");
> >> +
> >> + ax_local->stats.rx_crc_errors++;
> >> + kfree_skb(rx_skb);
> >> + return;
> >> + }
> >> +
> >> + len = rxhdr->flags_len & RX_HDR1_PKT_LEN;
> >> + if (netif_msg_pktdata(ax_local)) {
> >> + char pfx[IFNAMSIZ + 7];
> >> +
> >> + snprintf(pfx, sizeof(pfx), "%s: ", ndev->name);
> >> + netdev_info(ndev, "RX data, total len %d, packet len %d\n",
> >> + rx_skb->len, len);
> >> +
> >> + netdev_info(ndev, " Dump RX packet header:");
> >> + print_hex_dump(KERN_INFO, pfx, DUMP_PREFIX_OFFSET, 16, 1,
> >> + rx_skb->data, sizeof(*rxhdr), 0);
> >> +
> >> + netdev_info(ndev, " Dump RX packet:");
> >> + print_hex_dump(KERN_INFO, pfx, DUMP_PREFIX_OFFSET, 16, 1,
> >> + rx_skb->data + sizeof(*rxhdr), len, 0);
> >> + }
> >> +
> >> + skb_pull(rx_skb, sizeof(*rxhdr));
> >> + pskb_trim(rx_skb, len);
> >> +
> >> + ax88796c_skb_return(ax_local, rx_skb, rxhdr);
> >> +}
> >> +
> >> +static int ax88796c_receive(struct net_device *ndev)
> >> +{
> >> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
> >> + struct skb_data *entry;
> >> + u16 w_count, pkt_len;
> >> + struct sk_buff *skb;
> >> + u8 pkt_cnt;
> >> +
> >> + WARN_ON(!mutex_is_locked(&ax_local->spi_lock));
> >> +
> >> + /* check rx packet and total word count */
> >> + AX_WRITE(&ax_local->ax_spi, AX_READ(&ax_local->ax_spi, P0_RTWCR)
> >> + | RTWCR_RX_LATCH, P0_RTWCR);
> >> +
> >> + pkt_cnt = AX_READ(&ax_local->ax_spi, P0_RXBCR2) & RXBCR2_PKT_MASK;
> >> + if (!pkt_cnt)
> >> + return 0;
> >> +
> >> + pkt_len = AX_READ(&ax_local->ax_spi, P0_RCPHR) & 0x7FF;
> >> +
> >> + w_count = ((pkt_len + 6 + 3) & 0xFFFC) >> 1;
> >
> > w_count = round_up(pkt_len + 6, 4) >> 1;
> >
>
> Done.
>
> >> + skb = netdev_alloc_skb(ndev, (w_count * 2));
> >
> > parenthesis unnecessary
> >
>
> Done.
>
> >> + if (!skb) {
> >> + AX_WRITE(&ax_local->ax_spi, RXBCR1_RXB_DISCARD, P0_RXBCR1);
> >
> > Increment rx_dropped counter here?
> >
>
> Done.
>
> >> + return 0;
> >> + }
> >> + entry = (struct skb_data *)skb->cb;
> >> +
> >> + AX_WRITE(&ax_local->ax_spi, RXBCR1_RXB_START | w_count, P0_RXBCR1);
> >> +
> >> + axspi_read_rxq(&ax_local->ax_spi,
> >> + skb_put(skb, w_count * 2), skb->len);
> >> +
> >> + /* Check if rx bridge is idle */
> >> + if ((AX_READ(&ax_local->ax_spi, P0_RXBCR2) & RXBCR2_RXB_IDLE) == 0) {
> >> + netif_err(ax_local, rx_err, ndev,
> >> + "Rx Bridge is not idle\n");
> >
> > rate limit?
> >
>
> Ok.
>
> >> + AX_WRITE(&ax_local->ax_spi, RXBCR2_RXB_REINIT, P0_RXBCR2);
> >> +
> >> + entry->state = rx_err;
> >> + } else {
> >> + entry->state = rx_done;
> >> + }
> >> +
> >> + AX_WRITE(&ax_local->ax_spi, ISR_RXPKT, P0_ISR);
> >> +
> >> + ax88796c_rx_fixup(ax_local, skb);
> >> +
> >> + return 1;
> >> +}
> >> +
> >> +static int ax88796c_process_isr(struct ax88796c_device *ax_local)
> >> +{
> >> + struct net_device *ndev = ax_local->ndev;
> >> + u8 done = 0;
> >
> > The logic associated with this variable is "is there more to do" rather
> > than "done", no?
> >
>
> ax88796c_receive() returns 1, if there may be something more to do. So
> yes, let's rename it to todo.
>
> >> + u16 isr;
> >> +
> >> + WARN_ON(!mutex_is_locked(&ax_local->spi_lock));
> >> +
> >> + isr = AX_READ(&ax_local->ax_spi, P0_ISR);
> >> + AX_WRITE(&ax_local->ax_spi, isr, P0_ISR);
> >> +
> >> + netif_dbg(ax_local, intr, ndev, " ISR 0x%04x\n", isr);
> >> +
> >> + if (isr & ISR_TXERR) {
> >> + netif_dbg(ax_local, intr, ndev, " TXERR interrupt\n");
> >> + AX_WRITE(&ax_local->ax_spi, TXNR_TXB_REINIT, P0_TSNR);
> >> + ax_local->seq_num = 0x1f;
> >> + }
> >> +
> >> + if (isr & ISR_TXPAGES) {
> >> + netif_dbg(ax_local, intr, ndev, " TXPAGES interrupt\n");
> >> + set_bit(EVENT_TX, &ax_local->flags);
> >> + }
> >> +
> >> + if (isr & ISR_LINK) {
> >> + netif_dbg(ax_local, intr, ndev, " Link change interrupt\n");
> >> + phy_mac_interrupt(ax_local->ndev->phydev);
> >> + }
> >> +
> >> + if (isr & ISR_RXPKT) {
> >> + netif_dbg(ax_local, intr, ndev, " RX interrupt\n");
> >> + done = ax88796c_receive(ax_local->ndev);
> >> + }
> >> +
> >> + return done;
> >> +}
> >
> >> +static void ax88796c_work(struct work_struct *work)
> >> +{
> >> + struct ax88796c_device *ax_local =
> >> + container_of(work, struct ax88796c_device, ax_work);
> >> +
> >> + mutex_lock(&ax_local->spi_lock);
> >> +
> >> + if (test_bit(EVENT_SET_MULTI, &ax_local->flags)) {
> >> + ax88796c_set_hw_multicast(ax_local->ndev);
> >> + clear_bit(EVENT_SET_MULTI, &ax_local->flags);
> >> + }
> >> +
> >> + if (test_bit(EVENT_INTR, &ax_local->flags)) {
> >> + AX_WRITE(&ax_local->ax_spi, IMR_MASKALL, P0_IMR);
> >> +
> >> + while (1) {
> >> + if (!ax88796c_process_isr(ax_local))
> >> + break;
> >
> > while (ax88796c_process_isr(ax_local))
> > /* nothing */;
> > ?
> >
>
> Ok.
>
> >> + }
> >> +
> >> + clear_bit(EVENT_INTR, &ax_local->flags);
> >> +
> >> + AX_WRITE(&ax_local->ax_spi, IMR_DEFAULT, P0_IMR);
> >> +
> >> + enable_irq(ax_local->ndev->irq);
> >> + }
> >> +
> >> + if (test_bit(EVENT_TX, &ax_local->flags)) {
> >> + while (skb_queue_len(&ax_local->tx_wait_q)) {
> >> + if (!ax88796c_hard_xmit(ax_local))
> >> + break;
> >> + }
> >> +
> >> + clear_bit(EVENT_TX, &ax_local->flags);
> >> +
> >> + if (netif_queue_stopped(ax_local->ndev) &&
> >> + (skb_queue_len(&ax_local->tx_wait_q) < TX_QUEUE_LOW_WATER))
> >> + netif_wake_queue(ax_local->ndev);
> >> + }
> >> +
> >> + mutex_unlock(&ax_local->spi_lock);
> >> +}
> >
> >> +static void ax88796c_set_csums(struct ax88796c_device *ax_local)
> >> +{
> >> + struct net_device *ndev = ax_local->ndev;
> >> +
> >> + WARN_ON(!mutex_is_locked(&ax_local->spi_lock));
> >
> > lockdep_assert_held() in all those cases
> >
>
> Done.
>
> >> +static void ax88796c_free_skb_queue(struct sk_buff_head *q)
> >> +{
> >> + struct sk_buff *skb;
> >> +
> >> + while (q->qlen) {
> >> + skb = skb_dequeue(q);
> >> + kfree_skb(skb);
> >> + }
> >
> > __skb_queue_purge()
> >
>
> Done.
>
> >> +}
> >> +
> >> +static int
> >> +ax88796c_close(struct net_device *ndev)
> >> +{
> >> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
> >> +
> >> + netif_stop_queue(ndev);
> >> + phy_stop(ndev->phydev);
> >> +
> >> + mutex_lock(&ax_local->spi_lock);
> >> +
> >> + /* Disable MAC interrupts */
> >> + AX_WRITE(&ax_local->ax_spi, IMR_MASKALL, P0_IMR);
> >> + ax88796c_free_skb_queue(&ax_local->tx_wait_q);
> >> + ax88796c_soft_reset(ax_local);
> >> +
> >> + mutex_unlock(&ax_local->spi_lock);
> >> +
> >> + free_irq(ndev->irq, ndev);
> >> +
> >> + return 0;
> >> +}
> >
> >> +struct ax88796c_device {
> >> + struct spi_device *spi;
> >> + struct net_device *ndev;
> >> + struct net_device_stats stats;
> >
> > You need to use 64 bit stats, like struct rtnl_link_stats64.
> > On a 32bit system at 100Mbps ulong can wrap in minutes.
> >
>
> Let me see. At first glance
>
> git grep -l ndo_get_stats\\\> drivers/net/ethernet/ | xargs grep -li SPEED_100\\\>
>
> quite a number of Fast Ethernet drivers use net_device_stats. Let me
> calculate.
>
> - bytes
> 100Mbps is ~10MiB/s
> sending 4GiB at 10MiB/s takes 27 minutes
>
> - packets
> minimum frame size is 84 bytes (840 bits on the wire) on 100Mbps means
> 119048 pps at this speed it takse 10 hours to transmit 2^32 packets
>
> Anyway, I switched to rtnl_link_stats64. Tell me, is it OK to just
> memcpy() in .ndo_get_stats64?
You should uses the helpers in include/linux/u64_stats_sync.h to make
sure the synchronization between readers and writers is correct. A
memcpy() within those primitives should be O.K.
Andrew
More information about the linux-arm-kernel
mailing list