[PATCH 2/5] pinctrl: remove zte zx driver

Arnd Bergmann arnd at kernel.org
Wed Jan 20 08:20:42 EST 2021


From: Arnd Bergmann <arnd at arndb.de>

The zte zx platform is getting removed, so this driver is no
longer needed.

Cc: Jun Nie <jun.nie at linaro.org>
Cc: Shawn Guo <shawnguo at kernel.org>
Signed-off-by: Arnd Bergmann <arnd at arndb.de>
---
 .../bindings/pinctrl/pinctrl-zx.txt           |   84 --
 drivers/pinctrl/Kconfig                       |    1 -
 drivers/pinctrl/Makefile                      |    1 -
 drivers/pinctrl/zte/Kconfig                   |   14 -
 drivers/pinctrl/zte/Makefile                  |    3 -
 drivers/pinctrl/zte/pinctrl-zx.c              |  445 -------
 drivers/pinctrl/zte/pinctrl-zx.h              |  102 --
 drivers/pinctrl/zte/pinctrl-zx296718.c        | 1024 -----------------
 8 files changed, 1674 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt
 delete mode 100644 drivers/pinctrl/zte/Kconfig
 delete mode 100644 drivers/pinctrl/zte/Makefile
 delete mode 100644 drivers/pinctrl/zte/pinctrl-zx.c
 delete mode 100644 drivers/pinctrl/zte/pinctrl-zx.h
 delete mode 100644 drivers/pinctrl/zte/pinctrl-zx296718.c

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt
deleted file mode 100644
index 39170f372599..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-* ZTE ZX Pin Controller
-
-The pin controller on ZTE ZX platforms is kinda of hybrid.  It consists of
-a main controller and an auxiliary one.  For example, on ZX296718 SoC, the
-main controller is TOP_PMM and the auxiliary one is AON_IOCFG.  Both
-controllers work together to control pin multiplexing and configuration in
-the way illustrated as below.
-
-
-           GMII_RXD3 ---+
-                        |
-             DVI1_HS ---+----------------------------- GMII_RXD3 (TOP pin)
-                        |
-             BGPIO16 ---+                               ^
-                                                        | pinconf
-                        ^                               |
-                        | pinmux                        |
-                        |                               |
-
-                   TOP_PMM (main)           AON_IOCFG (aux)
-
-                        |                       |       |
-                        |                pinmux |       |
-                        | pinmux                v       |
-                        v                               | pinconf
-                                    KEY_ROW2 ---+       v
-        PORT1_LCD_TE ---+                       |
-                        |            AGPIO10 ---+------ KEY_ROW2 (AON pin)
-          I2S0_DOUT3 ---+                       |
-                        |-----------------------+
-            PWM_OUT3 ---+
-                        |
-             VGA_VS1 ---+
-
-
-For most of pins like GMII_RXD3 in the figure, the pinmux function is
-controlled by TOP_PMM block only, and this type of pins are meant by term
-'TOP pins'.  For pins like KEY_ROW2, the pinmux is controlled by both
-TOP_PMM and AON_IOCFG blocks, as the available multiplexing functions for
-the pin spread in both controllers.  This type of pins are called 'AON pins'.
-Though pinmux implementation is quite different, pinconf is same for both
-types of pins.  Both are controlled by auxiliary controller, i.e. AON_IOCFG
-on ZX296718.
-
-Required properties:
-- compatible: should be "zte,zx296718-pmm".
-- reg: the register physical address and length.
-- zte,auxiliary-controller: phandle to the auxiliary pin controller which
-  implements pinmux for AON pins and pinconf for all pins.
-
-The following pin configuration are supported. Please refer to
-pinctrl-bindings.txt in this directory for more details of the common
-pinctrl bindings used by client devices.
-
-- bias-pull-up
-- bias-pull-down
-- drive-strength
-- input-enable
-- slew-rate
-
-Examples:
-
-iocfg: pin-controller at 119000 {
-	compatible = "zte,zx296718-iocfg";
-	reg = <0x119000 0x1000>;
-};
-
-pmm: pin-controller at 1462000 {
-	compatible = "zte,zx296718-pmm";
-	reg = <0x1462000 0x1000>;
-	zte,auxiliary-controller = <&iocfg>;
-};
-
-&pmm {
-	vga_pins: vga {
-		pins = "KEY_COL1", "KEY_COL2", "KEY_ROW1", "KEY_ROW2";
-		function = "VGA";
-	};
-};
-
-&vga {
-	pinctrl-names = "default";
-	pinctrl-0 = <&vga_pins>;
-};
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index d4b2f2e2ed75..1c1fa681b96d 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -417,7 +417,6 @@ source "drivers/pinctrl/ti/Kconfig"
 source "drivers/pinctrl/uniphier/Kconfig"
 source "drivers/pinctrl/vt8500/Kconfig"
 source "drivers/pinctrl/mediatek/Kconfig"
-source "drivers/pinctrl/zte/Kconfig"
 source "drivers/pinctrl/meson/Kconfig"
 source "drivers/pinctrl/cirrus/Kconfig"
 source "drivers/pinctrl/visconti/Kconfig"
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 5bb9bb6cc3ce..fef92794900d 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -71,6 +71,5 @@ obj-y				+= ti/
 obj-$(CONFIG_PINCTRL_UNIPHIER)	+= uniphier/
 obj-$(CONFIG_ARCH_VT8500)	+= vt8500/
 obj-y				+= mediatek/
-obj-$(CONFIG_PINCTRL_ZX)	+= zte/
 obj-y				+= cirrus/
 obj-$(CONFIG_PINCTRL_VISCONTI)	+= visconti/
diff --git a/drivers/pinctrl/zte/Kconfig b/drivers/pinctrl/zte/Kconfig
deleted file mode 100644
index 4fdc70511034..000000000000
--- a/drivers/pinctrl/zte/Kconfig
+++ /dev/null
@@ -1,14 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config PINCTRL_ZX
-	bool
-	select PINMUX
-	select GENERIC_PINCONF
-	select GENERIC_PINCTRL_GROUPS
-	select GENERIC_PINMUX_FUNCTIONS
-
-config PINCTRL_ZX296718
-	bool "ZTE ZX296718 pinctrl driver"
-	depends on OF && ARCH_ZX
-	select PINCTRL_ZX
-	help
-	  Say Y here to enable the ZX296718 pinctrl driver
diff --git a/drivers/pinctrl/zte/Makefile b/drivers/pinctrl/zte/Makefile
deleted file mode 100644
index 2084c7810f96..000000000000
--- a/drivers/pinctrl/zte/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_PINCTRL_ZX)	+= pinctrl-zx.o
-obj-$(CONFIG_PINCTRL_ZX296718)	+= pinctrl-zx296718.o
diff --git a/drivers/pinctrl/zte/pinctrl-zx.c b/drivers/pinctrl/zte/pinctrl-zx.c
deleted file mode 100644
index 80d00ab8c110..000000000000
--- a/drivers/pinctrl/zte/pinctrl-zx.c
+++ /dev/null
@@ -1,445 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2017 Sanechips Technology Co., Ltd.
- * Copyright 2017 Linaro Ltd.
- */
-
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
-#include <linux/pinctrl/pinctrl.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/pinctrl/pinmux.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include "../core.h"
-#include "../pinctrl-utils.h"
-#include "../pinmux.h"
-#include "pinctrl-zx.h"
-
-#define ZX_PULL_DOWN		BIT(0)
-#define ZX_PULL_UP		BIT(1)
-#define ZX_INPUT_ENABLE		BIT(3)
-#define ZX_DS_SHIFT		4
-#define ZX_DS_MASK		(0x7 << ZX_DS_SHIFT)
-#define ZX_DS_VALUE(x)		(((x) << ZX_DS_SHIFT) & ZX_DS_MASK)
-#define ZX_SLEW			BIT(8)
-
-struct zx_pinctrl {
-	struct pinctrl_dev *pctldev;
-	struct device *dev;
-	void __iomem *base;
-	void __iomem *aux_base;
-	spinlock_t lock;
-	struct zx_pinctrl_soc_info *info;
-};
-
-static int zx_dt_node_to_map(struct pinctrl_dev *pctldev,
-			     struct device_node *np_config,
-			     struct pinctrl_map **map, u32 *num_maps)
-{
-	return pinconf_generic_dt_node_to_map(pctldev, np_config, map,
-					      num_maps, PIN_MAP_TYPE_INVALID);
-}
-
-static const struct pinctrl_ops zx_pinctrl_ops = {
-	.dt_node_to_map = zx_dt_node_to_map,
-	.dt_free_map = pinctrl_utils_free_map,
-	.get_groups_count = pinctrl_generic_get_group_count,
-	.get_group_name = pinctrl_generic_get_group_name,
-	.get_group_pins = pinctrl_generic_get_group_pins,
-};
-
-#define NONAON_MVAL 2
-
-static int zx_set_mux(struct pinctrl_dev *pctldev, unsigned int func_selector,
-		      unsigned int group_selector)
-{
-	struct zx_pinctrl *zpctl = pinctrl_dev_get_drvdata(pctldev);
-	struct zx_pinctrl_soc_info *info = zpctl->info;
-	const struct pinctrl_pin_desc *pindesc = info->pins + group_selector;
-	struct zx_pin_data *data = pindesc->drv_data;
-	struct zx_mux_desc *mux;
-	u32 mask, offset, bitpos;
-	struct function_desc *func;
-	unsigned long flags;
-	u32 val, mval;
-
-	/* Skip reserved pin */
-	if (!data)
-		return -EINVAL;
-
-	mux = data->muxes;
-	mask = (1 << data->width) - 1;
-	offset = data->offset;
-	bitpos = data->bitpos;
-
-	func = pinmux_generic_get_function(pctldev, func_selector);
-	if (!func)
-		return -EINVAL;
-
-	while (mux->name) {
-		if (strcmp(mux->name, func->name) == 0)
-			break;
-		mux++;
-	}
-
-	/* Found mux value to be written */
-	mval = mux->muxval;
-
-	spin_lock_irqsave(&zpctl->lock, flags);
-
-	if (data->aon_pin) {
-		/*
-		 * It's an AON pin, whose mux register offset and bit position
-		 * can be calculated from pin number.  Each register covers 16
-		 * pins, and each pin occupies 2 bits.
-		 */
-		u16 aoffset = pindesc->number / 16 * 4;
-		u16 abitpos = (pindesc->number % 16) * 2;
-
-		if (mval & AON_MUX_FLAG) {
-			/*
-			 * This is a mux value that needs to be written into
-			 * AON pinmux register.  Write it and then we're done.
-			 */
-			val = readl(zpctl->aux_base + aoffset);
-			val &= ~(0x3 << abitpos);
-			val |= (mval & 0x3) << abitpos;
-			writel(val, zpctl->aux_base + aoffset);
-		} else {
-			/*
-			 * It's a mux value that needs to be written into TOP
-			 * pinmux register.
-			 */
-			val = readl(zpctl->base + offset);
-			val &= ~(mask << bitpos);
-			val |= (mval & mask) << bitpos;
-			writel(val, zpctl->base + offset);
-
-			/*
-			 * In this case, the AON pinmux register needs to be
-			 * set up to select non-AON function.
-			 */
-			val = readl(zpctl->aux_base + aoffset);
-			val &= ~(0x3 << abitpos);
-			val |= NONAON_MVAL << abitpos;
-			writel(val, zpctl->aux_base + aoffset);
-		}
-
-	} else {
-		/*
-		 * This is a TOP pin, and we only need to set up TOP pinmux
-		 * register and then we're done with it.
-		 */
-		val = readl(zpctl->base + offset);
-		val &= ~(mask << bitpos);
-		val |= (mval & mask) << bitpos;
-		writel(val, zpctl->base + offset);
-	}
-
-	spin_unlock_irqrestore(&zpctl->lock, flags);
-
-	return 0;
-}
-
-static const struct pinmux_ops zx_pinmux_ops = {
-	.get_functions_count = pinmux_generic_get_function_count,
-	.get_function_name = pinmux_generic_get_function_name,
-	.get_function_groups = pinmux_generic_get_function_groups,
-	.set_mux = zx_set_mux,
-};
-
-static int zx_pin_config_get(struct pinctrl_dev *pctldev, unsigned int pin,
-			     unsigned long *config)
-{
-	struct zx_pinctrl *zpctl = pinctrl_dev_get_drvdata(pctldev);
-	struct zx_pinctrl_soc_info *info = zpctl->info;
-	const struct pinctrl_pin_desc *pindesc = info->pins + pin;
-	struct zx_pin_data *data = pindesc->drv_data;
-	enum pin_config_param param = pinconf_to_config_param(*config);
-	u32 val;
-
-	/* Skip reserved pin */
-	if (!data)
-		return -EINVAL;
-
-	val = readl(zpctl->aux_base + data->coffset);
-	val = val >> data->cbitpos;
-
-	switch (param) {
-	case PIN_CONFIG_BIAS_PULL_DOWN:
-		val &= ZX_PULL_DOWN;
-		val = !!val;
-		if (val == 0)
-			return -EINVAL;
-		break;
-	case PIN_CONFIG_BIAS_PULL_UP:
-		val &= ZX_PULL_UP;
-		val = !!val;
-		if (val == 0)
-			return -EINVAL;
-		break;
-	case PIN_CONFIG_INPUT_ENABLE:
-		val &= ZX_INPUT_ENABLE;
-		val = !!val;
-		if (val == 0)
-			return -EINVAL;
-		break;
-	case PIN_CONFIG_DRIVE_STRENGTH:
-		val &= ZX_DS_MASK;
-		val = val >> ZX_DS_SHIFT;
-		break;
-	case PIN_CONFIG_SLEW_RATE:
-		val &= ZX_SLEW;
-		val = !!val;
-		break;
-	default:
-		return -ENOTSUPP;
-	}
-
-	*config = pinconf_to_config_packed(param, val);
-
-	return 0;
-}
-
-static int zx_pin_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
-			     unsigned long *configs, unsigned int num_configs)
-{
-	struct zx_pinctrl *zpctl = pinctrl_dev_get_drvdata(pctldev);
-	struct zx_pinctrl_soc_info *info = zpctl->info;
-	const struct pinctrl_pin_desc *pindesc = info->pins + pin;
-	struct zx_pin_data *data = pindesc->drv_data;
-	enum pin_config_param param;
-	u32 val, arg;
-	int i;
-
-	/* Skip reserved pin */
-	if (!data)
-		return -EINVAL;
-
-	val = readl(zpctl->aux_base + data->coffset);
-
-	for (i = 0; i < num_configs; i++) {
-		param = pinconf_to_config_param(configs[i]);
-		arg = pinconf_to_config_argument(configs[i]);
-
-		switch (param) {
-		case PIN_CONFIG_BIAS_PULL_DOWN:
-			val |= ZX_PULL_DOWN << data->cbitpos;
-			break;
-		case PIN_CONFIG_BIAS_PULL_UP:
-			val |= ZX_PULL_UP << data->cbitpos;
-			break;
-		case PIN_CONFIG_INPUT_ENABLE:
-			val |= ZX_INPUT_ENABLE << data->cbitpos;
-			break;
-		case PIN_CONFIG_DRIVE_STRENGTH:
-			val &= ~(ZX_DS_MASK << data->cbitpos);
-			val |= ZX_DS_VALUE(arg) << data->cbitpos;
-			break;
-		case PIN_CONFIG_SLEW_RATE:
-			if (arg)
-				val |= ZX_SLEW << data->cbitpos;
-			else
-				val &= ~ZX_SLEW << data->cbitpos;
-			break;
-		default:
-			return -ENOTSUPP;
-		}
-	}
-
-	writel(val, zpctl->aux_base + data->coffset);
-	return 0;
-}
-
-static const struct pinconf_ops zx_pinconf_ops = {
-	.pin_config_set = zx_pin_config_set,
-	.pin_config_get = zx_pin_config_get,
-	.is_generic = true,
-};
-
-static int zx_pinctrl_build_state(struct platform_device *pdev)
-{
-	struct zx_pinctrl *zpctl = platform_get_drvdata(pdev);
-	struct zx_pinctrl_soc_info *info = zpctl->info;
-	struct pinctrl_dev *pctldev = zpctl->pctldev;
-	struct function_desc *functions;
-	int nfunctions;
-	struct group_desc *groups;
-	int ngroups;
-	int i;
-
-	/* Every single pin composes a group */
-	ngroups = info->npins;
-	groups = devm_kcalloc(&pdev->dev, ngroups, sizeof(*groups),
-			      GFP_KERNEL);
-	if (!groups)
-		return -ENOMEM;
-
-	for (i = 0; i < ngroups; i++) {
-		const struct pinctrl_pin_desc *pindesc = info->pins + i;
-		struct group_desc *group = groups + i;
-
-		group->name = pindesc->name;
-		group->pins = (int *) &pindesc->number;
-		group->num_pins = 1;
-		radix_tree_insert(&pctldev->pin_group_tree, i, group);
-	}
-
-	pctldev->num_groups = ngroups;
-
-	/* Build function list from pin mux functions */
-	functions = kcalloc(info->npins, sizeof(*functions), GFP_KERNEL);
-	if (!functions)
-		return -ENOMEM;
-
-	nfunctions = 0;
-	for (i = 0; i < info->npins; i++) {
-		const struct pinctrl_pin_desc *pindesc = info->pins + i;
-		struct zx_pin_data *data = pindesc->drv_data;
-		struct zx_mux_desc *mux;
-
-		/* Reserved pins do not have a drv_data at all */
-		if (!data)
-			continue;
-
-		/* Loop over all muxes for the pin */
-		mux = data->muxes;
-		while (mux->name) {
-			struct function_desc *func = functions;
-
-			/* Search function list for given mux */
-			while (func->name) {
-				if (strcmp(mux->name, func->name) == 0) {
-					/* Function exists */
-					func->num_group_names++;
-					break;
-				}
-				func++;
-			}
-
-			if (!func->name) {
-				/* New function */
-				func->name = mux->name;
-				func->num_group_names = 1;
-				radix_tree_insert(&pctldev->pin_function_tree,
-						  nfunctions++, func);
-			}
-
-			mux++;
-		}
-	}
-
-	pctldev->num_functions = nfunctions;
-	functions = krealloc(functions, nfunctions * sizeof(*functions),
-			     GFP_KERNEL);
-
-	/* Find pin groups for every single function */
-	for (i = 0; i < info->npins; i++) {
-		const struct pinctrl_pin_desc *pindesc = info->pins + i;
-		struct zx_pin_data *data = pindesc->drv_data;
-		struct zx_mux_desc *mux;
-
-		if (!data)
-			continue;
-
-		mux = data->muxes;
-		while (mux->name) {
-			struct function_desc *func;
-			const char **group;
-			int j;
-
-			/* Find function for given mux */
-			for (j = 0; j < nfunctions; j++)
-				if (strcmp(functions[j].name, mux->name) == 0)
-					break;
-
-			func = functions + j;
-			if (!func->group_names) {
-				func->group_names = devm_kcalloc(&pdev->dev,
-						func->num_group_names,
-						sizeof(*func->group_names),
-						GFP_KERNEL);
-				if (!func->group_names) {
-					kfree(functions);
-					return -ENOMEM;
-				}
-			}
-
-			group = func->group_names;
-			while (*group)
-				group++;
-			*group = pindesc->name;
-
-			mux++;
-		}
-	}
-
-	return 0;
-}
-
-int zx_pinctrl_init(struct platform_device *pdev,
-		    struct zx_pinctrl_soc_info *info)
-{
-	struct pinctrl_desc *pctldesc;
-	struct zx_pinctrl *zpctl;
-	struct device_node *np;
-	int ret;
-
-	zpctl = devm_kzalloc(&pdev->dev, sizeof(*zpctl), GFP_KERNEL);
-	if (!zpctl)
-		return -ENOMEM;
-
-	spin_lock_init(&zpctl->lock);
-
-	zpctl->base = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(zpctl->base))
-		return PTR_ERR(zpctl->base);
-
-	np = of_parse_phandle(pdev->dev.of_node, "zte,auxiliary-controller", 0);
-	if (!np) {
-		dev_err(&pdev->dev, "failed to find auxiliary controller\n");
-		return -ENODEV;
-	}
-
-	zpctl->aux_base = of_iomap(np, 0);
-	of_node_put(np);
-	if (!zpctl->aux_base)
-		return -ENOMEM;
-
-	zpctl->dev = &pdev->dev;
-	zpctl->info = info;
-
-	pctldesc = devm_kzalloc(&pdev->dev, sizeof(*pctldesc), GFP_KERNEL);
-	if (!pctldesc)
-		return -ENOMEM;
-
-	pctldesc->name = dev_name(&pdev->dev);
-	pctldesc->owner = THIS_MODULE;
-	pctldesc->pins = info->pins;
-	pctldesc->npins = info->npins;
-	pctldesc->pctlops = &zx_pinctrl_ops;
-	pctldesc->pmxops = &zx_pinmux_ops;
-	pctldesc->confops = &zx_pinconf_ops;
-
-	zpctl->pctldev = devm_pinctrl_register(&pdev->dev, pctldesc, zpctl);
-	if (IS_ERR(zpctl->pctldev)) {
-		ret = PTR_ERR(zpctl->pctldev);
-		dev_err(&pdev->dev, "failed to register pinctrl: %d\n", ret);
-		return ret;
-	}
-
-	platform_set_drvdata(pdev, zpctl);
-
-	ret = zx_pinctrl_build_state(pdev);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to build state: %d\n", ret);
-		return ret;
-	}
-
-	dev_info(&pdev->dev, "initialized pinctrl driver\n");
-	return 0;
-}
diff --git a/drivers/pinctrl/zte/pinctrl-zx.h b/drivers/pinctrl/zte/pinctrl-zx.h
deleted file mode 100644
index a0692e2e9012..000000000000
--- a/drivers/pinctrl/zte/pinctrl-zx.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2017 Sanechips Technology Co., Ltd.
- * Copyright 2017 Linaro Ltd.
- */
-
-#ifndef __PINCTRL_ZX_H
-#define __PINCTRL_ZX_H
-
-/**
- * struct zx_mux_desc - hardware mux descriptor
- * @name: mux function name
- * @muxval: mux register bit value
- */
-struct zx_mux_desc {
-	const char *name;
-	u8 muxval;
-};
-
-/**
- * struct zx_pin_data - hardware per-pin data
- * @aon_pin: whether it's an AON pin
- * @offset: register offset within TOP pinmux controller
- * @bitpos: bit position within TOP pinmux register
- * @width: bit width within TOP pinmux register
- * @coffset: pinconf register offset within AON controller
- * @cbitpos: pinconf bit position within AON register
- * @muxes: available mux function names and corresponding register values
- *
- * Unlike TOP pinmux and AON pinconf registers which are arranged pretty
- * arbitrarily, AON pinmux register bits are well organized per pin id, and
- * each pin occupies two bits, so that we can calculate the AON register offset
- * and bit position from pin id.  Thus, we only need to define TOP pinmux and
- * AON pinconf register data for the pin.
- */
-struct zx_pin_data {
-	bool aon_pin;
-	u16 offset;
-	u16 bitpos;
-	u16 width;
-	u16 coffset;
-	u16 cbitpos;
-	struct zx_mux_desc *muxes;
-};
-
-struct zx_pinctrl_soc_info {
-	const struct pinctrl_pin_desc *pins;
-	unsigned int npins;
-};
-
-#define TOP_PIN(pin, off, bp, wd, coff, cbp, ...) {		\
-	.number = pin,						\
-	.name = #pin,						\
-	.drv_data = &(struct zx_pin_data) {			\
-		.aon_pin = false,				\
-		.offset = off,					\
-		.bitpos = bp,					\
-		.width = wd,					\
-		.coffset = coff,				\
-		.cbitpos = cbp,					\
-		.muxes = (struct zx_mux_desc[]) {		\
-			 __VA_ARGS__, { } },			\
-	},							\
-}
-
-#define AON_PIN(pin, off, bp, wd, coff, cbp, ...) {		\
-	.number = pin,						\
-	.name = #pin,						\
-	.drv_data = &(struct zx_pin_data) {			\
-		.aon_pin = true,				\
-		.offset = off,					\
-		.bitpos = bp,					\
-		.width = wd,					\
-		.coffset = coff,				\
-		.cbitpos = cbp,					\
-		.muxes = (struct zx_mux_desc[]) {		\
-			 __VA_ARGS__, { } },			\
-	},							\
-}
-
-#define ZX_RESERVED(pin) PINCTRL_PIN(pin, #pin)
-
-#define TOP_MUX(_val, _name) {					\
-	.name = _name,						\
-	.muxval = _val,						\
-}
-
-/*
- * When the flag is set, it's a mux configuration for an AON pin that sits in
- * AON register.  Otherwise, it's one for AON pin but sitting in TOP register.
- */
-#define AON_MUX_FLAG BIT(7)
-
-#define AON_MUX(_val, _name) {					\
-	.name = _name,						\
-	.muxval = _val | AON_MUX_FLAG,				\
-}
-
-int zx_pinctrl_init(struct platform_device *pdev,
-		    struct zx_pinctrl_soc_info *info);
-
-#endif /* __PINCTRL_ZX_H */
diff --git a/drivers/pinctrl/zte/pinctrl-zx296718.c b/drivers/pinctrl/zte/pinctrl-zx296718.c
deleted file mode 100644
index c980aecb6f2f..000000000000
--- a/drivers/pinctrl/zte/pinctrl-zx296718.c
+++ /dev/null
@@ -1,1024 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2017 Sanechips Technology Co., Ltd.
- * Copyright 2017 Linaro Ltd.
- */
-
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
-#include <linux/pinctrl/pinctrl.h>
-#include <linux/platform_device.h>
-
-#include "pinctrl-zx.h"
-
-#define TOP_REG0	0x00
-#define TOP_REG1	0x04
-#define TOP_REG2	0x08
-#define TOP_REG3	0x0c
-#define TOP_REG4	0x10
-#define TOP_REG5	0x14
-#define TOP_REG6	0x18
-#define TOP_REG7	0x1c
-#define TOP_REG8	0x20
-
-/*
- * The pin numbering starts from AON pins with reserved ones included,
- * so that register data like offset and bit position for AON pins can
- * be calculated from pin number.
- */
-enum zx296718_pin {
-	/* aon_pmm_reg_0 */
-	I2C3_SCL = 0,
-	I2C3_SDA = 1,
-	AON_RESERVED0 = 2,
-	AON_RESERVED1 = 3,
-	SEC_EN = 4,
-	UART0_RXD = 5,
-	UART0_TXD = 6,
-	IR_IN = 7,
-	SPI0_CLK = 8,
-	SPI0_CS = 9,
-	SPI0_TXD = 10,
-	SPI0_RXD = 11,
-	KEY_COL0 = 12,
-	KEY_COL1 = 13,
-	KEY_COL2 = 14,
-	KEY_ROW0 = 15,
-
-	/* aon_pmm_reg_1 */
-	KEY_ROW1 = 16,
-	KEY_ROW2 = 17,
-	HDMI_SCL = 18,
-	HDMI_SDA = 19,
-	JTAG_TCK = 20,
-	JTAG_TRSTN = 21,
-	JTAG_TMS = 22,
-	JTAG_TDI = 23,
-	JTAG_TDO = 24,
-	I2C0_SCL = 25,
-	I2C0_SDA = 26,
-	I2C1_SCL = 27,
-	I2C1_SDA = 28,
-	AON_RESERVED2 = 29,
-	AON_RESERVED3 = 30,
-	AON_RESERVED4 = 31,
-
-	/* aon_pmm_reg_2 */
-	SPI1_CLK = 32,
-	SPI1_CS = 33,
-	SPI1_TXD = 34,
-	SPI1_RXD = 35,
-	AON_RESERVED5 = 36,
-	AON_RESERVED6 = 37,
-	AUDIO_DET = 38,
-	SPDIF_OUT = 39,
-	HDMI_CEC = 40,
-	HDMI_HPD = 41,
-	GMAC_25M_OUT = 42,
-	BOOT_SEL0 = 43,
-	BOOT_SEL1 = 44,
-	BOOT_SEL2 = 45,
-	DEEP_SLEEP_OUT_N = 46,
-	AON_RESERVED7 = 47,
-
-	/* top_pmm_reg_0 */
-	GMII_GTX_CLK = 48,
-	GMII_TX_CLK = 49,
-	GMII_TXD0 = 50,
-	GMII_TXD1 = 51,
-	GMII_TXD2 = 52,
-	GMII_TXD3 = 53,
-	GMII_TXD4 = 54,
-	GMII_TXD5 = 55,
-	GMII_TXD6 = 56,
-	GMII_TXD7 = 57,
-	GMII_TX_ER = 58,
-	GMII_TX_EN = 59,
-	GMII_RX_CLK = 60,
-	GMII_RXD0 = 61,
-	GMII_RXD1 = 62,
-	GMII_RXD2 = 63,
-
-	/* top_pmm_reg_1 */
-	GMII_RXD3 = 64,
-	GMII_RXD4 = 65,
-	GMII_RXD5 = 66,
-	GMII_RXD6 = 67,
-	GMII_RXD7 = 68,
-	GMII_RX_ER = 69,
-	GMII_RX_DV = 70,
-	GMII_COL = 71,
-	GMII_CRS = 72,
-	GMII_MDC = 73,
-	GMII_MDIO = 74,
-	SDIO1_CLK = 75,
-	SDIO1_CMD = 76,
-	SDIO1_DATA0 = 77,
-	SDIO1_DATA1 = 78,
-	SDIO1_DATA2 = 79,
-
-	/* top_pmm_reg_2 */
-	SDIO1_DATA3 = 80,
-	SDIO1_CD = 81,
-	SDIO1_WP = 82,
-	USIM1_CD = 83,
-	USIM1_CLK = 84,
-	USIM1_RST = 85,
-
-	/* top_pmm_reg_3 */
-	USIM1_DATA = 86,
-	SDIO0_CLK = 87,
-	SDIO0_CMD = 88,
-	SDIO0_DATA0 = 89,
-	SDIO0_DATA1 = 90,
-	SDIO0_DATA2 = 91,
-	SDIO0_DATA3 = 92,
-	SDIO0_CD = 93,
-	SDIO0_WP = 94,
-
-	/* top_pmm_reg_4 */
-	TSI0_DATA0 = 95,
-	SPINOR_CLK = 96,
-	TSI2_DATA = 97,
-	TSI2_CLK = 98,
-	TSI2_SYNC = 99,
-	TSI2_VALID = 100,
-	SPINOR_CS = 101,
-	SPINOR_DQ0 = 102,
-	SPINOR_DQ1 = 103,
-	SPINOR_DQ2 = 104,
-	SPINOR_DQ3 = 105,
-	VGA_HS = 106,
-	VGA_VS = 107,
-	TSI3_DATA = 108,
-
-	/* top_pmm_reg_5 */
-	TSI3_CLK = 109,
-	TSI3_SYNC = 110,
-	TSI3_VALID = 111,
-	I2S1_WS = 112,
-	I2S1_BCLK = 113,
-	I2S1_MCLK = 114,
-	I2S1_DIN0 = 115,
-	I2S1_DOUT0 = 116,
-	SPI3_CLK = 117,
-	SPI3_CS = 118,
-	SPI3_TXD = 119,
-	NAND_LDO_MS18_SEL = 120,
-
-	/* top_pmm_reg_6 */
-	SPI3_RXD = 121,
-	I2S0_MCLK = 122,
-	I2S0_BCLK = 123,
-	I2S0_WS = 124,
-	I2S0_DIN0 = 125,
-	I2S0_DOUT0 = 126,
-	I2C5_SCL = 127,
-	I2C5_SDA = 128,
-	SPI2_CLK = 129,
-	SPI2_CS = 130,
-	SPI2_TXD = 131,
-
-	/* top_pmm_reg_7 */
-	SPI2_RXD = 132,
-	NAND_WP_N = 133,
-	NAND_PAGE_SIZE0 = 134,
-	NAND_PAGE_SIZE1 = 135,
-	NAND_ADDR_CYCLE = 136,
-	NAND_RB0 = 137,
-	NAND_RB1 = 138,
-	NAND_RB2 = 139,
-	NAND_RB3 = 140,
-
-	/* top_pmm_reg_8 */
-	GMAC_125M_IN = 141,
-	GMAC_50M_OUT = 142,
-	SPINOR_SSCLK_LOOPBACK = 143,
-	SPINOR_SDIO1CLK_LOOPBACK = 144,
-};
-
-static const struct pinctrl_pin_desc zx296718_pins[] = {
-	/* aon_pmm_reg_0 */
-	AON_PIN(I2C3_SCL, TOP_REG2, 18, 2, 0x48, 0,
-		AON_MUX(0x0, "ANMI"),		/* anmi */
-		AON_MUX(0x1, "AGPIO"),		/* agpio29 */
-		AON_MUX(0x2, "nonAON"),		/* pin0 */
-		AON_MUX(0x3, "EXT_INT"),	/* int4 */
-		TOP_MUX(0x0, "I2C3"),		/* scl */
-		TOP_MUX(0x1, "SPI2"),		/* txd */
-		TOP_MUX(0x2, "I2S1")),		/* din0 */
-	AON_PIN(I2C3_SDA, TOP_REG2, 20, 2, 0x48, 9,
-		AON_MUX(0x0, "WD"),		/* rst_b */
-		AON_MUX(0x1, "AGPIO"),		/* agpio30 */
-		AON_MUX(0x2, "nonAON"),		/* pin1 */
-		AON_MUX(0x3, "EXT_INT"),	/* int5 */
-		TOP_MUX(0x0, "I2C3"),		/* sda */
-		TOP_MUX(0x1, "SPI2"),		/* rxd */
-		TOP_MUX(0x2, "I2S0")),		/* mclk */
-	ZX_RESERVED(AON_RESERVED0),
-	ZX_RESERVED(AON_RESERVED1),
-	AON_PIN(SEC_EN, TOP_REG3, 5, 1, 0x50, 0,
-		AON_MUX(0x0, "SEC"),		/* en */
-		AON_MUX(0x1, "AGPIO"),		/* agpio28 */
-		AON_MUX(0x2, "nonAON"),		/* pin3 */
-		AON_MUX(0x3, "EXT_INT"),	/* int7 */
-		TOP_MUX(0x0, "I2C2"),		/* sda */
-		TOP_MUX(0x1, "SPI2")),		/* cs */
-	AON_PIN(UART0_RXD, 0, 0, 0, 0x50, 9,
-		AON_MUX(0x0, "UART0"),		/* rxd */
-		AON_MUX(0x1, "AGPIO"),		/* agpio20 */
-		AON_MUX(0x2, "nonAON")),	/* pin34 */
-	AON_PIN(UART0_TXD, 0, 0, 0, 0x50, 18,
-		AON_MUX(0x0, "UART0"),		/* txd */
-		AON_MUX(0x1, "AGPIO"),		/* agpio21 */
-		AON_MUX(0x2, "nonAON")),	/* pin32 */
-	AON_PIN(IR_IN, 0, 0, 0, 0x64, 0,
-		AON_MUX(0x0, "IR"),		/* in */
-		AON_MUX(0x1, "AGPIO"),		/* agpio0 */
-		AON_MUX(0x2, "nonAON")),	/* pin27 */
-	AON_PIN(SPI0_CLK, TOP_REG3, 16, 1, 0x64, 9,
-		AON_MUX(0x0, "EXT_INT"),	/* int0 */
-		AON_MUX(0x1, "AGPIO"),		/* agpio23 */
-		AON_MUX(0x2, "nonAON"),		/* pin5 */
-		AON_MUX(0x3, "PCU"),		/* test6 */
-		TOP_MUX(0x0, "SPI0"),		/* clk */
-		TOP_MUX(0x1, "ISP")),		/* flash_trig */
-	AON_PIN(SPI0_CS, TOP_REG3, 17, 1, 0x64, 18,
-		AON_MUX(0x0, "EXT_INT"),	/* int1 */
-		AON_MUX(0x1, "AGPIO"),		/* agpio24 */
-		AON_MUX(0x2, "nonAON"),		/* pin6 */
-		AON_MUX(0x3, "PCU"),		/* test0 */
-		TOP_MUX(0x0, "SPI0"),		/* cs */
-		TOP_MUX(0x1, "ISP")),		/* prelight_trig */
-	AON_PIN(SPI0_TXD, TOP_REG3, 18, 1, 0x68, 0,
-		AON_MUX(0x0, "EXT_INT"),	/* int2 */
-		AON_MUX(0x1, "AGPIO"),		/* agpio25 */
-		AON_MUX(0x2, "nonAON"),		/* pin7 */
-		AON_MUX(0x3, "PCU"),		/* test1 */
-		TOP_MUX(0x0, "SPI0"),		/* txd */
-		TOP_MUX(0x1, "ISP")),		/* shutter_trig */
-	AON_PIN(SPI0_RXD, TOP_REG3, 19, 1, 0x68, 9,
-		AON_MUX(0x0, "EXT_INT"),	/* int3 */
-		AON_MUX(0x1, "AGPIO"),		/* agpio26 */
-		AON_MUX(0x2, "nonAON"),		/* pin8 */
-		AON_MUX(0x3, "PCU"),		/* test2 */
-		TOP_MUX(0x0, "SPI0"),		/* rxd */
-		TOP_MUX(0x1, "ISP")),		/* shutter_open */
-	AON_PIN(KEY_COL0, TOP_REG3, 20, 1, 0x68, 18,
-		AON_MUX(0x0, "KEY"),		/* col0 */
-		AON_MUX(0x1, "AGPIO"),		/* agpio5 */
-		AON_MUX(0x2, "nonAON"),		/* pin9 */
-		AON_MUX(0x3, "PCU"),		/* test3 */
-		TOP_MUX(0x0, "UART3"),		/* rxd */
-		TOP_MUX(0x1, "I2S0")),		/* din1 */
-	AON_PIN(KEY_COL1, TOP_REG3, 21, 2, 0x6c, 0,
-		AON_MUX(0x0, "KEY"),		/* col1 */
-		AON_MUX(0x1, "AGPIO"),		/* agpio6 */
-		AON_MUX(0x2, "nonAON"),		/* pin10 */
-		TOP_MUX(0x0, "UART3"),		/* txd */
-		TOP_MUX(0x1, "I2S0"),		/* din2 */
-		TOP_MUX(0x2, "VGA")),		/* scl */
-	AON_PIN(KEY_COL2, TOP_REG3, 23, 2, 0x6c, 9,
-		AON_MUX(0x0, "KEY"),		/* col2 */
-		AON_MUX(0x1, "AGPIO"),		/* agpio7 */
-		AON_MUX(0x2, "nonAON"),		/* pin11 */
-		TOP_MUX(0x0, "PWM"),		/* out1 */
-		TOP_MUX(0x1, "I2S0"),		/* din3 */
-		TOP_MUX(0x2, "VGA")),		/* sda */
-	AON_PIN(KEY_ROW0, 0, 0, 0, 0x6c, 18,
-		AON_MUX(0x0, "KEY"),		/* row0 */
-		AON_MUX(0x1, "AGPIO"),		/* agpio8 */
-		AON_MUX(0x2, "nonAON"),		/* pin33 */
-		AON_MUX(0x3, "WD")),		/* rst_b */
-
-	/* aon_pmm_reg_1 */
-	AON_PIN(KEY_ROW1, TOP_REG3, 25, 2, 0x70, 0,
-		AON_MUX(0x0, "KEY"),		/* row1 */
-		AON_MUX(0x1, "AGPIO"),		/* agpio9 */
-		AON_MUX(0x2, "nonAON"),		/* pin12 */
-		TOP_MUX(0x0, "LCD"),		/* port0 lcd_te */
-		TOP_MUX(0x1, "I2S0"),		/* dout2 */
-		TOP_MUX(0x2, "PWM"),		/* out2 */
-		TOP_MUX(0x3, "VGA")),		/* hs1 */
-	AON_PIN(KEY_ROW2, TOP_REG3, 27, 2, 0x70, 9,
-		AON_MUX(0x0, "KEY"),		/* row2 */
-		AON_MUX(0x1, "AGPIO"),		/* agpio10 */
-		AON_MUX(0x2, "nonAON"),		/* pin13 */
-		TOP_MUX(0x0, "LCD"),		/* port1 lcd_te */
-		TOP_MUX(0x1, "I2S0"),		/* dout3 */
-		TOP_MUX(0x2, "PWM"),		/* out3 */
-		TOP_MUX(0x3, "VGA")),		/* vs1 */
-	AON_PIN(HDMI_SCL, TOP_REG3, 29, 1, 0x70, 18,
-		AON_MUX(0x0, "PCU"),		/* test7 */
-		AON_MUX(0x1, "AGPIO"),		/* agpio3 */
-		AON_MUX(0x2, "nonAON"),		/* pin14 */
-		TOP_MUX(0x0, "HDMI"),		/* scl */
-		TOP_MUX(0x1, "UART3")),		/* rxd */
-	AON_PIN(HDMI_SDA, TOP_REG3, 30, 1, 0x74, 0,
-		AON_MUX(0x0, "PCU"),		/* test8 */
-		AON_MUX(0x1, "AGPIO"),		/* agpio4 */
-		AON_MUX(0x2, "nonAON"),		/* pin15 */
-		TOP_MUX(0x0, "HDMI"),		/* sda */
-		TOP_MUX(0x1, "UART3")),		/* txd */
-	AON_PIN(JTAG_TCK, TOP_REG7, 3, 1, 0x78, 18,
-		AON_MUX(0x0, "JTAG"),		/* tck */
-		AON_MUX(0x1, "AGPIO"),		/* agpio11 */
-		AON_MUX(0x2, "nonAON"),		/* pin22 */
-		AON_MUX(0x3, "EXT_INT"),	/* int4 */
-		TOP_MUX(0x0, "SPI4"),		/* clk */
-		TOP_MUX(0x1, "UART1")),		/* rxd */
-	AON_PIN(JTAG_TRSTN, TOP_REG7, 4, 1, 0xac, 0,
-		AON_MUX(0x0, "JTAG"),		/* trstn */
-		AON_MUX(0x1, "AGPIO"),		/* agpio12 */
-		AON_MUX(0x2, "nonAON"),		/* pin23 */
-		AON_MUX(0x3, "EXT_INT"),	/* int5 */
-		TOP_MUX(0x0, "SPI4"),		/* cs */
-		TOP_MUX(0x1, "UART1")),		/* txd */
-	AON_PIN(JTAG_TMS, TOP_REG7, 5, 1, 0xac, 9,
-		AON_MUX(0x0, "JTAG"),		/* tms */
-		AON_MUX(0x1, "AGPIO"),		/* agpio13 */
-		AON_MUX(0x2, "nonAON"),		/* pin24 */
-		AON_MUX(0x3, "EXT_INT"),	/* int6 */
-		TOP_MUX(0x0, "SPI4"),		/* txd */
-		TOP_MUX(0x1, "UART2")),		/* rxd */
-	AON_PIN(JTAG_TDI, TOP_REG7, 6, 1, 0xac, 18,
-		AON_MUX(0x0, "JTAG"),		/* tdi */
-		AON_MUX(0x1, "AGPIO"),		/* agpio14 */
-		AON_MUX(0x2, "nonAON"),		/* pin25 */
-		AON_MUX(0x3, "EXT_INT"),	/* int7 */
-		TOP_MUX(0x0, "SPI4"),		/* rxd */
-		TOP_MUX(0x1, "UART2")),		/* txd */
-	AON_PIN(JTAG_TDO, 0, 0, 0, 0xb0, 0,
-		AON_MUX(0x0, "JTAG"),		/* tdo */
-		AON_MUX(0x1, "AGPIO"),		/* agpio15 */
-		AON_MUX(0x2, "nonAON")),	/* pin26 */
-	AON_PIN(I2C0_SCL, 0, 0, 0, 0xb0, 9,
-		AON_MUX(0x0, "I2C0"),		/* scl */
-		AON_MUX(0x1, "AGPIO"),		/* agpio16 */
-		AON_MUX(0x2, "nonAON")),	/* pin28 */
-	AON_PIN(I2C0_SDA, 0, 0, 0, 0xb0, 18,
-		AON_MUX(0x0, "I2C0"),		/* sda */
-		AON_MUX(0x1, "AGPIO"),		/* agpio17 */
-		AON_MUX(0x2, "nonAON")),	/* pin29 */
-	AON_PIN(I2C1_SCL, TOP_REG8, 4, 1, 0xb4, 0,
-		AON_MUX(0x0, "I2C1"),		/* scl */
-		AON_MUX(0x1, "AGPIO"),		/* agpio18 */
-		AON_MUX(0x2, "nonAON"),		/* pin30 */
-		TOP_MUX(0x0, "LCD")),		/* port0 lcd_te */
-	AON_PIN(I2C1_SDA, TOP_REG8, 5, 1, 0xb4, 9,
-		AON_MUX(0x0, "I2C1"),		/* sda */
-		AON_MUX(0x1, "AGPIO"),		/* agpio19 */
-		AON_MUX(0x2, "nonAON"),		/* pin31 */
-		TOP_MUX(0x0, "LCD")),		/* port1 lcd_te */
-	ZX_RESERVED(AON_RESERVED2),
-	ZX_RESERVED(AON_RESERVED3),
-	ZX_RESERVED(AON_RESERVED4),
-
-	/* aon_pmm_reg_2 */
-	AON_PIN(SPI1_CLK, TOP_REG2, 6, 3, 0x40, 9,
-		AON_MUX(0x0, "EXT_INT"),	/* int0 */
-		AON_MUX(0x1, "PCU"),		/* test12 */
-		AON_MUX(0x2, "nonAON"),		/* pin39 */
-		TOP_MUX(0x0, "SPI1"),		/* clk */
-		TOP_MUX(0x1, "PCM"),		/* clk */
-		TOP_MUX(0x2, "BGPIO"),		/* gpio35 */
-		TOP_MUX(0x3, "I2C4"),		/* scl */
-		TOP_MUX(0x4, "I2S1"),		/* mclk */
-		TOP_MUX(0x5, "ISP")),		/* flash_trig */
-	AON_PIN(SPI1_CS, TOP_REG2, 9, 3, 0x40, 18,
-		AON_MUX(0x0, "EXT_INT"),	/* int1 */
-		AON_MUX(0x1, "PCU"),		/* test13 */
-		AON_MUX(0x2, "nonAON"),		/* pin40 */
-		TOP_MUX(0x0, "SPI1"),		/* cs */
-		TOP_MUX(0x1, "PCM"),		/* fs */
-		TOP_MUX(0x2, "BGPIO"),		/* gpio36 */
-		TOP_MUX(0x3, "I2C4"),		/* sda */
-		TOP_MUX(0x4, "I2S1"),		/* bclk */
-		TOP_MUX(0x5, "ISP")),		/* prelight_trig */
-	AON_PIN(SPI1_TXD, TOP_REG2, 12, 3, 0x44, 0,
-		AON_MUX(0x0, "EXT_INT"),	/* int2 */
-		AON_MUX(0x1, "PCU"),		/* test14 */
-		AON_MUX(0x2, "nonAON"),		/* pin41 */
-		TOP_MUX(0x0, "SPI1"),		/* txd */
-		TOP_MUX(0x1, "PCM"),		/* txd */
-		TOP_MUX(0x2, "BGPIO"),		/* gpio37 */
-		TOP_MUX(0x3, "UART5"),		/* rxd */
-		TOP_MUX(0x4, "I2S1"),		/* ws */
-		TOP_MUX(0x5, "ISP")),		/* shutter_trig */
-	AON_PIN(SPI1_RXD, TOP_REG2, 15, 3, 0x44, 9,
-		AON_MUX(0x0, "EXT_INT"),	/* int3 */
-		AON_MUX(0x1, "PCU"),		/* test15 */
-		AON_MUX(0x2, "nonAON"),		/* pin42 */
-		TOP_MUX(0x0, "SPI1"),		/* rxd */
-		TOP_MUX(0x1, "PCM"),		/* rxd */
-		TOP_MUX(0x2, "BGPIO"),		/* gpio38 */
-		TOP_MUX(0x3, "UART5"),		/* txd */
-		TOP_MUX(0x4, "I2S1"),		/* dout0 */
-		TOP_MUX(0x5, "ISP")),		/* shutter_open */
-	ZX_RESERVED(AON_RESERVED5),
-	ZX_RESERVED(AON_RESERVED6),
-	AON_PIN(AUDIO_DET, TOP_REG3, 3, 2, 0x48, 18,
-		AON_MUX(0x0, "PCU"),		/* test4 */
-		AON_MUX(0x1, "AGPIO"),		/* agpio27 */
-		AON_MUX(0x2, "nonAON"),		/* pin2 */
-		AON_MUX(0x3, "EXT_INT"),	/* int16 */
-		TOP_MUX(0x0, "AUDIO"),		/* detect */
-		TOP_MUX(0x1, "I2C2"),		/* scl */
-		TOP_MUX(0x2, "SPI2")),		/* clk */
-	AON_PIN(SPDIF_OUT, TOP_REG3, 14, 2, 0x78, 9,
-		AON_MUX(0x0, "PCU"),		/* test5 */
-		AON_MUX(0x1, "AGPIO"),		/* agpio22 */
-		AON_MUX(0x2, "nonAON"),		/* pin4 */
-		TOP_MUX(0x0, "SPDIF"),		/* out */
-		TOP_MUX(0x1, "PWM"),		/* out0 */
-		TOP_MUX(0x2, "ISP")),		/* fl_trig */
-	AON_PIN(HDMI_CEC, 0, 0, 0, 0x74, 9,
-		AON_MUX(0x0, "PCU"),		/* test9 */
-		AON_MUX(0x1, "AGPIO"),		/* agpio1 */
-		AON_MUX(0x2, "nonAON")),	/* pin16 */
-	AON_PIN(HDMI_HPD, 0, 0, 0, 0x74, 18,
-		AON_MUX(0x0, "PCU"),		/* test10 */
-		AON_MUX(0x1, "AGPIO"),		/* agpio2 */
-		AON_MUX(0x2, "nonAON")),	/* pin17 */
-	AON_PIN(GMAC_25M_OUT, 0, 0, 0, 0x78, 0,
-		AON_MUX(0x0, "PCU"),		/* test11 */
-		AON_MUX(0x1, "AGPIO"),		/* agpio31 */
-		AON_MUX(0x2, "nonAON")),	/* pin43 */
-	AON_PIN(BOOT_SEL0, 0, 0, 0, 0xc0, 9,
-		AON_MUX(0x0, "BOOT"),		/* sel0 */
-		AON_MUX(0x1, "AGPIO"),		/* agpio18 */
-		AON_MUX(0x2, "nonAON")),	/* pin18 */
-	AON_PIN(BOOT_SEL1, 0, 0, 0, 0xc0, 18,
-		AON_MUX(0x0, "BOOT"),		/* sel1 */
-		AON_MUX(0x1, "AGPIO"),		/* agpio19 */
-		AON_MUX(0x2, "nonAON")),	/* pin19 */
-	AON_PIN(BOOT_SEL2, 0, 0, 0, 0xc4, 0,
-		AON_MUX(0x0, "BOOT"),		/* sel2 */
-		AON_MUX(0x1, "AGPIO"),		/* agpio20 */
-		AON_MUX(0x2, "nonAON")),	/* pin20 */
-	AON_PIN(DEEP_SLEEP_OUT_N, 0, 0, 0, 0xc4, 9,
-		AON_MUX(0x0, "DEEPSLP"),	/* deep sleep out_n */
-		AON_MUX(0x1, "AGPIO"),		/* agpio21 */
-		AON_MUX(0x2, "nonAON")),	/* pin21 */
-	ZX_RESERVED(AON_RESERVED7),
-
-	/* top_pmm_reg_0 */
-	TOP_PIN(GMII_GTX_CLK, TOP_REG0, 0, 2, 0x10, 0,
-		TOP_MUX(0x0, "GMII"),		/* gtx_clk */
-		TOP_MUX(0x1, "DVI0"),		/* clk */
-		TOP_MUX(0x2, "BGPIO")),		/* gpio0 */
-	TOP_PIN(GMII_TX_CLK, TOP_REG0, 2, 2, 0x10, 9,
-		TOP_MUX(0x0, "GMII"),		/* tx_clk */
-		TOP_MUX(0x1, "DVI0"),		/* vs */
-		TOP_MUX(0x2, "BGPIO")),		/* gpio1 */
-	TOP_PIN(GMII_TXD0, TOP_REG0, 4, 2, 0x10, 18,
-		TOP_MUX(0x0, "GMII"),		/* txd0 */
-		TOP_MUX(0x1, "DVI0"),		/* hs */
-		TOP_MUX(0x2, "BGPIO")),		/* gpio2 */
-	TOP_PIN(GMII_TXD1, TOP_REG0, 6, 2, 0x14, 0,
-		TOP_MUX(0x0, "GMII"),		/* txd1 */
-		TOP_MUX(0x1, "DVI0"),		/* d0 */
-		TOP_MUX(0x2, "BGPIO")),		/* gpio3 */
-	TOP_PIN(GMII_TXD2, TOP_REG0, 8, 2, 0x14, 9,
-		TOP_MUX(0x0, "GMII"),		/* txd2 */
-		TOP_MUX(0x1, "DVI0"),		/* d1 */
-		TOP_MUX(0x2, "BGPIO")),		/* gpio4 */
-	TOP_PIN(GMII_TXD3, TOP_REG0, 10, 2, 0x14, 18,
-		TOP_MUX(0x0, "GMII"),		/* txd3 */
-		TOP_MUX(0x1, "DVI0"),		/* d2 */
-		TOP_MUX(0x2, "BGPIO")),		/* gpio5 */
-	TOP_PIN(GMII_TXD4, TOP_REG0, 12, 2, 0x18, 0,
-		TOP_MUX(0x0, "GMII"),		/* txd4 */
-		TOP_MUX(0x1, "DVI0"),		/* d3 */
-		TOP_MUX(0x2, "BGPIO")),		/* gpio6 */
-	TOP_PIN(GMII_TXD5, TOP_REG0, 14, 2, 0x18, 9,
-		TOP_MUX(0x0, "GMII"),		/* txd5 */
-		TOP_MUX(0x1, "DVI0"),		/* d4 */
-		TOP_MUX(0x2, "BGPIO")),		/* gpio7 */
-	TOP_PIN(GMII_TXD6, TOP_REG0, 16, 2, 0x18, 18,
-		TOP_MUX(0x0, "GMII"),		/* txd6 */
-		TOP_MUX(0x1, "DVI0"),		/* d5 */
-		TOP_MUX(0x2, "BGPIO")),		/* gpio8 */
-	TOP_PIN(GMII_TXD7, TOP_REG0, 18, 2, 0x1c, 0,
-		TOP_MUX(0x0, "GMII"),		/* txd7 */
-		TOP_MUX(0x1, "DVI0"),		/* d6 */
-		TOP_MUX(0x2, "BGPIO")),		/* gpio9 */
-	TOP_PIN(GMII_TX_ER, TOP_REG0, 20, 2, 0x1c, 9,
-		TOP_MUX(0x0, "GMII"),		/* tx_er */
-		TOP_MUX(0x1, "DVI0"),		/* d7 */
-		TOP_MUX(0x2, "BGPIO")),		/* gpio10 */
-	TOP_PIN(GMII_TX_EN, TOP_REG0, 22, 2, 0x1c, 18,
-		TOP_MUX(0x0, "GMII"),		/* tx_en */
-		TOP_MUX(0x1, "DVI0"),		/* d8 */
-		TOP_MUX(0x3, "BGPIO")),		/* gpio11 */
-	TOP_PIN(GMII_RX_CLK, TOP_REG0, 24, 2, 0x20, 0,
-		TOP_MUX(0x0, "GMII"),		/* rx_clk */
-		TOP_MUX(0x1, "DVI0"),		/* d9 */
-		TOP_MUX(0x3, "BGPIO")),		/* gpio12 */
-	TOP_PIN(GMII_RXD0, TOP_REG0, 26, 2, 0x20, 9,
-		TOP_MUX(0x0, "GMII"),		/* rxd0 */
-		TOP_MUX(0x1, "DVI0"),		/* d10 */
-		TOP_MUX(0x3, "BGPIO")),		/* gpio13 */
-	TOP_PIN(GMII_RXD1, TOP_REG0, 28, 2, 0x20, 18,
-		TOP_MUX(0x0, "GMII"),		/* rxd1 */
-		TOP_MUX(0x1, "DVI0"),		/* d11 */
-		TOP_MUX(0x2, "BGPIO")),		/* gpio14 */
-	TOP_PIN(GMII_RXD2, TOP_REG0, 30, 2, 0x24, 0,
-		TOP_MUX(0x0, "GMII"),		/* rxd2 */
-		TOP_MUX(0x1, "DVI1"),		/* clk */
-		TOP_MUX(0x2, "BGPIO")),		/* gpio15 */
-
-	/* top_pmm_reg_1 */
-	TOP_PIN(GMII_RXD3, TOP_REG1, 0, 2, 0x24, 9,
-		TOP_MUX(0x0, "GMII"),		/* rxd3 */
-		TOP_MUX(0x1, "DVI1"),		/* hs */
-		TOP_MUX(0x2, "BGPIO")),		/* gpio16 */
-	TOP_PIN(GMII_RXD4, TOP_REG1, 2, 2, 0x24, 18,
-		TOP_MUX(0x0, "GMII"),		/* rxd4 */
-		TOP_MUX(0x1, "DVI1"),		/* vs */
-		TOP_MUX(0x2, "BGPIO")),		/* gpio17 */
-	TOP_PIN(GMII_RXD5, TOP_REG1, 4, 2, 0x28, 0,
-		TOP_MUX(0x0, "GMII"),		/* rxd5 */
-		TOP_MUX(0x1, "DVI1"),		/* d0 */
-		TOP_MUX(0x2, "BGPIO"),		/* gpio18 */
-		TOP_MUX(0x3, "TSI0")),		/* dat0 */
-	TOP_PIN(GMII_RXD6, TOP_REG1, 6, 2, 0x28, 9,
-		TOP_MUX(0x0, "GMII"),		/* rxd6 */
-		TOP_MUX(0x1, "DVI1"),		/* d1 */
-		TOP_MUX(0x2, "BGPIO"),		/* gpio19 */
-		TOP_MUX(0x3, "TSI0")),		/* clk */
-	TOP_PIN(GMII_RXD7, TOP_REG1, 8, 2, 0x28, 18,
-		TOP_MUX(0x0, "GMII"),		/* rxd7 */
-		TOP_MUX(0x1, "DVI1"),		/* d2 */
-		TOP_MUX(0x2, "BGPIO"),		/* gpio20 */
-		TOP_MUX(0x3, "TSI0")),		/* sync */
-	TOP_PIN(GMII_RX_ER, TOP_REG1, 10, 2, 0x2c, 0,
-		TOP_MUX(0x0, "GMII"),		/* rx_er */
-		TOP_MUX(0x1, "DVI1"),		/* d3 */
-		TOP_MUX(0x2, "BGPIO"),		/* gpio21 */
-		TOP_MUX(0x3, "TSI0")),		/* valid */
-	TOP_PIN(GMII_RX_DV, TOP_REG1, 12, 2, 0x2c, 9,
-		TOP_MUX(0x0, "GMII"),		/* rx_dv */
-		TOP_MUX(0x1, "DVI1"),		/* d4 */
-		TOP_MUX(0x2, "BGPIO"),		/* gpio22 */
-		TOP_MUX(0x3, "TSI1")),		/* dat0 */
-	TOP_PIN(GMII_COL, TOP_REG1, 14, 2, 0x2c, 18,
-		TOP_MUX(0x0, "GMII"),		/* col */
-		TOP_MUX(0x1, "DVI1"),		/* d5 */
-		TOP_MUX(0x2, "BGPIO"),		/* gpio23 */
-		TOP_MUX(0x3, "TSI1")),		/* clk */
-	TOP_PIN(GMII_CRS, TOP_REG1, 16, 2, 0x30, 0,
-		TOP_MUX(0x0, "GMII"),		/* crs */
-		TOP_MUX(0x1, "DVI1"),		/* d6 */
-		TOP_MUX(0x2, "BGPIO"),		/* gpio24 */
-		TOP_MUX(0x3, "TSI1")),		/* sync */
-	TOP_PIN(GMII_MDC, TOP_REG1, 18, 2, 0x30, 9,
-		TOP_MUX(0x0, "GMII"),		/* mdc */
-		TOP_MUX(0x1, "DVI1"),		/* d7 */
-		TOP_MUX(0x2, "BGPIO"),		/* gpio25 */
-		TOP_MUX(0x3, "TSI1")),		/* valid */
-	TOP_PIN(GMII_MDIO, TOP_REG1, 20, 1, 0x30, 18,
-		TOP_MUX(0x0, "GMII"),		/* mdio */
-		TOP_MUX(0x2, "BGPIO")),		/* gpio26 */
-	TOP_PIN(SDIO1_CLK, TOP_REG1, 21, 2, 0x34, 18,
-		TOP_MUX(0x0, "SDIO1"),		/* clk */
-		TOP_MUX(0x1, "USIM0"),		/* clk */
-		TOP_MUX(0x2, "BGPIO"),		/* gpio27 */
-		TOP_MUX(0x3, "SPINOR")),	/* clk */
-	TOP_PIN(SDIO1_CMD, TOP_REG1, 23, 2, 0x38, 0,
-		TOP_MUX(0x0, "SDIO1"),		/* cmd */
-		TOP_MUX(0x1, "USIM0"),		/* cd */
-		TOP_MUX(0x2, "BGPIO"),		/* gpio28 */
-		TOP_MUX(0x3, "SPINOR")),	/* cs */
-	TOP_PIN(SDIO1_DATA0, TOP_REG1, 25, 2, 0x38, 9,
-		TOP_MUX(0x0, "SDIO1"),		/* dat0 */
-		TOP_MUX(0x1, "USIM0"),		/* rst */
-		TOP_MUX(0x2, "BGPIO"),		/* gpio29 */
-		TOP_MUX(0x3, "SPINOR")),	/* dq0 */
-	TOP_PIN(SDIO1_DATA1, TOP_REG1, 27, 2, 0x38, 18,
-		TOP_MUX(0x0, "SDIO1"),		/* dat1 */
-		TOP_MUX(0x1, "USIM0"),		/* data */
-		TOP_MUX(0x2, "BGPIO"),		/* gpio30 */
-		TOP_MUX(0x3, "SPINOR")),	/* dq1 */
-	TOP_PIN(SDIO1_DATA2, TOP_REG1, 29, 2, 0x3c, 0,
-		TOP_MUX(0x0, "SDIO1"),		/* dat2 */
-		TOP_MUX(0x1, "BGPIO"),		/* gpio31 */
-		TOP_MUX(0x2, "SPINOR")),	/* dq2 */
-
-	/* top_pmm_reg_2 */
-	TOP_PIN(SDIO1_DATA3, TOP_REG2, 0, 2, 0x3c, 9,
-		TOP_MUX(0x0, "SDIO1"),		/* dat3 */
-		TOP_MUX(0x1, "BGPIO"),		/* gpio32 */
-		TOP_MUX(0x2, "SPINOR")),	/* dq3 */
-	TOP_PIN(SDIO1_CD, TOP_REG2, 2, 2, 0x3c, 18,
-		TOP_MUX(0x0, "SDIO1"),		/* cd */
-		TOP_MUX(0x1, "BGPIO"),		/* gpio33 */
-		TOP_MUX(0x2, "ISP")),		/* fl_trig */
-	TOP_PIN(SDIO1_WP, TOP_REG2, 4, 2, 0x40, 0,
-		TOP_MUX(0x0, "SDIO1"),		/* wp */
-		TOP_MUX(0x1, "BGPIO"),		/* gpio34 */
-		TOP_MUX(0x2, "ISP")),		/* ref_clk */
-	TOP_PIN(USIM1_CD, TOP_REG2, 22, 3, 0x44, 18,
-		TOP_MUX(0x0, "USIM1"),		/* cd */
-		TOP_MUX(0x1, "UART4"),		/* rxd */
-		TOP_MUX(0x2, "BGPIO"),		/* gpio39 */
-		TOP_MUX(0x3, "SPI3"),		/* clk */
-		TOP_MUX(0x4, "I2S0"),		/* bclk */
-		TOP_MUX(0x5, "B_DVI0")),	/* d8 */
-	TOP_PIN(USIM1_CLK, TOP_REG2, 25, 3, 0x4c, 18,
-		TOP_MUX(0x0, "USIM1"),		/* clk */
-		TOP_MUX(0x1, "UART4"),		/* txd */
-		TOP_MUX(0x2, "BGPIO"),		/* gpio40 */
-		TOP_MUX(0x3, "SPI3"),		/* cs */
-		TOP_MUX(0x4, "I2S0"),		/* ws */
-		TOP_MUX(0x5, "B_DVI0")),	/* d9 */
-	TOP_PIN(USIM1_RST, TOP_REG2, 28, 3, 0x4c, 0,
-		TOP_MUX(0x0, "USIM1"),		/* rst */
-		TOP_MUX(0x1, "UART4"),		/* cts */
-		TOP_MUX(0x2, "BGPIO"),		/* gpio41 */
-		TOP_MUX(0x3, "SPI3"),		/* txd */
-		TOP_MUX(0x4, "I2S0"),		/* dout0 */
-		TOP_MUX(0x5, "B_DVI0")),	/* d10 */
-
-	/* top_pmm_reg_3 */
-	TOP_PIN(USIM1_DATA, TOP_REG3, 0, 3, 0x4c, 9,
-		TOP_MUX(0x0, "USIM1"),		/* dat */
-		TOP_MUX(0x1, "UART4"),		/* rst */
-		TOP_MUX(0x2, "BGPIO"),		/* gpio42 */
-		TOP_MUX(0x3, "SPI3"),		/* rxd */
-		TOP_MUX(0x4, "I2S0"),		/* din0 */
-		TOP_MUX(0x5, "B_DVI0")),	/* d11 */
-	TOP_PIN(SDIO0_CLK, TOP_REG3, 6, 1, 0x58, 0,
-		TOP_MUX(0x0, "SDIO0"),		/* clk */
-		TOP_MUX(0x1, "GPIO")),		/* gpio43 */
-	TOP_PIN(SDIO0_CMD, TOP_REG3, 7, 1, 0x58, 9,
-		TOP_MUX(0x0, "SDIO0"),		/* cmd */
-		TOP_MUX(0x1, "GPIO")),		/* gpio44 */
-	TOP_PIN(SDIO0_DATA0, TOP_REG3, 8, 1, 0x58, 18,
-		TOP_MUX(0x0, "SDIO0"),		/* dat0 */
-		TOP_MUX(0x1, "GPIO")),		/* gpio45 */
-	TOP_PIN(SDIO0_DATA1, TOP_REG3, 9, 1, 0x5c, 0,
-		TOP_MUX(0x0, "SDIO0"),		/* dat1 */
-		TOP_MUX(0x1, "GPIO")),		/* gpio46 */
-	TOP_PIN(SDIO0_DATA2, TOP_REG3, 10, 1, 0x5c, 9,
-		TOP_MUX(0x0, "SDIO0"),		/* dat2 */
-		TOP_MUX(0x1, "GPIO")),		/* gpio47 */
-	TOP_PIN(SDIO0_DATA3, TOP_REG3, 11, 1, 0x5c, 18,
-		TOP_MUX(0x0, "SDIO0"),		/* dat3 */
-		TOP_MUX(0x1, "GPIO")),		/* gpio48 */
-	TOP_PIN(SDIO0_CD, TOP_REG3, 12, 1, 0x60, 0,
-		TOP_MUX(0x0, "SDIO0"),		/* cd */
-		TOP_MUX(0x1, "GPIO")),		/* gpio49 */
-	TOP_PIN(SDIO0_WP, TOP_REG3, 13, 1, 0x60, 9,
-		TOP_MUX(0x0, "SDIO0"),		/* wp */
-		TOP_MUX(0x1, "GPIO")),		/* gpio50 */
-
-	/* top_pmm_reg_4 */
-	TOP_PIN(TSI0_DATA0, TOP_REG4, 0, 2, 0x60, 18,
-		TOP_MUX(0x0, "TSI0"),		/* dat0 */
-		TOP_MUX(0x1, "LCD"),		/* clk */
-		TOP_MUX(0x2, "BGPIO")),		/* gpio51 */
-	TOP_PIN(SPINOR_CLK, TOP_REG4, 2, 2, 0xa8, 18,
-		TOP_MUX(0x0, "SPINOR"),		/* clk */
-		TOP_MUX(0x1, "TSI0"),		/* dat1 */
-		TOP_MUX(0x2, "LCD"),		/* dat0 */
-		TOP_MUX(0x3, "BGPIO")),		/* gpio52 */
-	TOP_PIN(TSI2_DATA, TOP_REG4, 4, 2, 0x7c, 0,
-		TOP_MUX(0x0, "TSI2"),		/* dat */
-		TOP_MUX(0x1, "TSI0"),		/* dat2 */
-		TOP_MUX(0x2, "LCD"),		/* dat1 */
-		TOP_MUX(0x3, "BGPIO")),		/* gpio53 */
-	TOP_PIN(TSI2_CLK, TOP_REG4, 6, 2, 0x7c, 9,
-		TOP_MUX(0x0, "TSI2"),		/* clk */
-		TOP_MUX(0x1, "TSI0"),		/* dat3 */
-		TOP_MUX(0x2, "LCD"),		/* dat2 */
-		TOP_MUX(0x3, "BGPIO")),		/* gpio54 */
-	TOP_PIN(TSI2_SYNC, TOP_REG4, 8, 2, 0x7c, 18,
-		TOP_MUX(0x0, "TSI2"),		/* sync */
-		TOP_MUX(0x1, "TSI0"),		/* dat4 */
-		TOP_MUX(0x2, "LCD"),		/* dat3 */
-		TOP_MUX(0x3, "BGPIO")),		/* gpio55 */
-	TOP_PIN(TSI2_VALID, TOP_REG4, 10, 2, 0x80, 0,
-		TOP_MUX(0x0, "TSI2"),		/* valid */
-		TOP_MUX(0x1, "TSI0"),		/* dat5 */
-		TOP_MUX(0x2, "LCD"),		/* dat4 */
-		TOP_MUX(0x3, "BGPIO")),		/* gpio56 */
-	TOP_PIN(SPINOR_CS, TOP_REG4, 12, 2, 0x80, 9,
-		TOP_MUX(0x0, "SPINOR"),		/* cs */
-		TOP_MUX(0x1, "TSI0"),		/* dat6 */
-		TOP_MUX(0x2, "LCD"),		/* dat5 */
-		TOP_MUX(0x3, "BGPIO")),		/* gpio57 */
-	TOP_PIN(SPINOR_DQ0, TOP_REG4, 14, 2, 0x80, 18,
-		TOP_MUX(0x0, "SPINOR"),		/* dq0 */
-		TOP_MUX(0x1, "TSI0"),		/* dat7 */
-		TOP_MUX(0x2, "LCD"),		/* dat6 */
-		TOP_MUX(0x3, "BGPIO")),		/* gpio58 */
-	TOP_PIN(SPINOR_DQ1, TOP_REG4, 16, 2, 0x84, 0,
-		TOP_MUX(0x0, "SPINOR"),		/* dq1 */
-		TOP_MUX(0x1, "TSI0"),		/* clk */
-		TOP_MUX(0x2, "LCD"),		/* dat7 */
-		TOP_MUX(0x3, "BGPIO")),		/* gpio59 */
-	TOP_PIN(SPINOR_DQ2, TOP_REG4, 18, 2, 0x84, 9,
-		TOP_MUX(0x0, "SPINOR"),		/* dq2 */
-		TOP_MUX(0x1, "TSI0"),		/* sync */
-		TOP_MUX(0x2, "LCD"),		/* dat8 */
-		TOP_MUX(0x3, "BGPIO")),		/* gpio60 */
-	TOP_PIN(SPINOR_DQ3, TOP_REG4, 20, 2, 0x84, 18,
-		TOP_MUX(0x0, "SPINOR"),		/* dq3 */
-		TOP_MUX(0x1, "TSI0"),		/* valid */
-		TOP_MUX(0x2, "LCD"),		/* dat9 */
-		TOP_MUX(0x3, "BGPIO")),		/* gpio61 */
-	TOP_PIN(VGA_HS, TOP_REG4, 22, 3, 0x88, 0,
-		TOP_MUX(0x0, "VGA"),		/* hs */
-		TOP_MUX(0x1, "TSI1"),		/* dat0 */
-		TOP_MUX(0x2, "LCD"),		/* dat10 */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio62 */
-		TOP_MUX(0x4, "I2S1"),		/* din1 */
-		TOP_MUX(0x5, "B_DVI0")),	/* clk */
-	TOP_PIN(VGA_VS, TOP_REG4, 25, 3, 0x88, 9,
-		TOP_MUX(0x0, "VGA"),		/* vs0 */
-		TOP_MUX(0x1, "TSI1"),		/* dat1 */
-		TOP_MUX(0x2, "LCD"),		/* dat11 */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio63 */
-		TOP_MUX(0x4, "I2S1"),		/* din2 */
-		TOP_MUX(0x5, "B_DVI0")),	/* vs */
-	TOP_PIN(TSI3_DATA, TOP_REG4, 28, 3, 0x88, 18,
-		TOP_MUX(0x0, "TSI3"),		/* dat */
-		TOP_MUX(0x1, "TSI1"),		/* dat2 */
-		TOP_MUX(0x2, "LCD"),		/* dat12 */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio64 */
-		TOP_MUX(0x4, "I2S1"),		/* din3 */
-		TOP_MUX(0x5, "B_DVI0")),	/* hs */
-
-	/* top_pmm_reg_5 */
-	TOP_PIN(TSI3_CLK, TOP_REG5, 0, 3, 0x8c, 0,
-		TOP_MUX(0x0, "TSI3"),		/* clk */
-		TOP_MUX(0x1, "TSI1"),		/* dat3 */
-		TOP_MUX(0x2, "LCD"),		/* dat13 */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio65 */
-		TOP_MUX(0x4, "I2S1"),		/* dout1 */
-		TOP_MUX(0x5, "B_DVI0")),	/* d0 */
-	TOP_PIN(TSI3_SYNC, TOP_REG5, 3, 3, 0x8c, 9,
-		TOP_MUX(0x0, "TSI3"),		/* sync */
-		TOP_MUX(0x1, "TSI1"),		/* dat4 */
-		TOP_MUX(0x2, "LCD"),		/* dat14 */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio66 */
-		TOP_MUX(0x4, "I2S1"),		/* dout2 */
-		TOP_MUX(0x5, "B_DVI0")),	/* d1 */
-	TOP_PIN(TSI3_VALID, TOP_REG5, 6, 3, 0x8c, 18,
-		TOP_MUX(0x0, "TSI3"),		/* valid */
-		TOP_MUX(0x1, "TSI1"),		/* dat5 */
-		TOP_MUX(0x2, "LCD"),		/* dat15 */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio67 */
-		TOP_MUX(0x4, "I2S1"),		/* dout3 */
-		TOP_MUX(0x5, "B_DVI0")),	/* d2 */
-	TOP_PIN(I2S1_WS, TOP_REG5, 9, 3, 0x90, 0,
-		TOP_MUX(0x0, "I2S1"),		/* ws */
-		TOP_MUX(0x1, "TSI1"),		/* dat6 */
-		TOP_MUX(0x2, "LCD"),		/* dat16 */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio68 */
-		TOP_MUX(0x4, "VGA"),		/* scl */
-		TOP_MUX(0x5, "B_DVI0")),	/* d3 */
-	TOP_PIN(I2S1_BCLK, TOP_REG5, 12, 3, 0x90, 9,
-		TOP_MUX(0x0, "I2S1"),		/* bclk */
-		TOP_MUX(0x1, "TSI1"),		/* dat7 */
-		TOP_MUX(0x2, "LCD"),		/* dat17 */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio69 */
-		TOP_MUX(0x4, "VGA"),		/* sda */
-		TOP_MUX(0x5, "B_DVI0")),	/* d4 */
-	TOP_PIN(I2S1_MCLK, TOP_REG5, 15, 2, 0x90, 18,
-		TOP_MUX(0x0, "I2S1"),		/* mclk */
-		TOP_MUX(0x1, "TSI1"),		/* clk */
-		TOP_MUX(0x2, "LCD"),		/* dat18 */
-		TOP_MUX(0x3, "BGPIO")),		/* gpio70 */
-	TOP_PIN(I2S1_DIN0, TOP_REG5, 17, 2, 0x94, 0,
-		TOP_MUX(0x0, "I2S1"),		/* din0 */
-		TOP_MUX(0x1, "TSI1"),		/* sync */
-		TOP_MUX(0x2, "LCD"),		/* dat19 */
-		TOP_MUX(0x3, "BGPIO")),		/* gpio71 */
-	TOP_PIN(I2S1_DOUT0, TOP_REG5, 19, 2, 0x94, 9,
-		TOP_MUX(0x0, "I2S1"),		/* dout0 */
-		TOP_MUX(0x1, "TSI1"),		/* valid */
-		TOP_MUX(0x2, "LCD"),		/* dat20 */
-		TOP_MUX(0x3, "BGPIO")),		/* gpio72 */
-	TOP_PIN(SPI3_CLK, TOP_REG5, 21, 3, 0x94, 18,
-		TOP_MUX(0x0, "SPI3"),		/* clk */
-		TOP_MUX(0x1, "TSO1"),		/* clk */
-		TOP_MUX(0x2, "LCD"),		/* dat21 */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio73 */
-		TOP_MUX(0x4, "UART5"),		/* rxd */
-		TOP_MUX(0x5, "PCM"),		/* fs */
-		TOP_MUX(0x6, "I2S0"),		/* din1 */
-		TOP_MUX(0x7, "B_DVI0")),	/* d5 */
-	TOP_PIN(SPI3_CS, TOP_REG5, 24, 3, 0x98, 0,
-		TOP_MUX(0x0, "SPI3"),		/* cs */
-		TOP_MUX(0x1, "TSO1"),		/* dat0 */
-		TOP_MUX(0x2, "LCD"),		/* dat22 */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio74 */
-		TOP_MUX(0x4, "UART5"),		/* txd */
-		TOP_MUX(0x5, "PCM"),		/* clk */
-		TOP_MUX(0x6, "I2S0"),		/* din2 */
-		TOP_MUX(0x7, "B_DVI0")),	/* d6 */
-	TOP_PIN(SPI3_TXD, TOP_REG5, 27, 3, 0x98, 9,
-		TOP_MUX(0x0, "SPI3"),		/* txd */
-		TOP_MUX(0x1, "TSO1"),		/* dat1 */
-		TOP_MUX(0x2, "LCD"),		/* dat23 */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio75 */
-		TOP_MUX(0x4, "UART5"),		/* cts */
-		TOP_MUX(0x5, "PCM"),		/* txd */
-		TOP_MUX(0x6, "I2S0"),		/* din3 */
-		TOP_MUX(0x7, "B_DVI0")),	/* d7 */
-	TOP_PIN(NAND_LDO_MS18_SEL, TOP_REG5, 30, 1, 0xe4, 0,
-		TOP_MUX(0x0, "NAND"),		/* ldo_ms18_sel */
-		TOP_MUX(0x1, "BGPIO")),		/* gpio99 */
-
-	/* top_pmm_reg_6 */
-	TOP_PIN(SPI3_RXD, TOP_REG6, 0, 3, 0x98, 18,
-		TOP_MUX(0x0, "SPI3"),		/* rxd */
-		TOP_MUX(0x1, "TSO1"),		/* dat2 */
-		TOP_MUX(0x2, "LCD"),		/* stvu_vsync */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio76 */
-		TOP_MUX(0x4, "UART5"),		/* rts */
-		TOP_MUX(0x5, "PCM"),		/* rxd */
-		TOP_MUX(0x6, "I2S0"),		/* dout1 */
-		TOP_MUX(0x7, "B_DVI1")),	/* clk */
-	TOP_PIN(I2S0_MCLK, TOP_REG6, 3, 3, 0x9c, 0,
-		TOP_MUX(0x0, "I2S0"),		/* mclk */
-		TOP_MUX(0x1, "TSO1"),		/* dat3 */
-		TOP_MUX(0x2, "LCD"),		/* stvd */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio77 */
-		TOP_MUX(0x4, "USIM0"),		/* cd */
-		TOP_MUX(0x5, "B_DVI1")),	/* vs */
-	TOP_PIN(I2S0_BCLK, TOP_REG6, 6, 3, 0x9c, 9,
-		TOP_MUX(0x0, "I2S0"),		/* bclk */
-		TOP_MUX(0x1, "TSO1"),		/* dat4 */
-		TOP_MUX(0x2, "LCD"),		/* sthl_hsync */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio78 */
-		TOP_MUX(0x4, "USIM0"),		/* clk */
-		TOP_MUX(0x5, "B_DVI1")),	/* hs */
-	TOP_PIN(I2S0_WS, TOP_REG6, 9, 3, 0x9c, 18,
-		TOP_MUX(0x0, "I2S0"),		/* ws */
-		TOP_MUX(0x1, "TSO1"),		/* dat5 */
-		TOP_MUX(0x2, "LCD"),		/* sthr */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio79 */
-		TOP_MUX(0x4, "USIM0"),		/* rst */
-		TOP_MUX(0x5, "B_DVI1")),	/* d0 */
-	TOP_PIN(I2S0_DIN0, TOP_REG6, 12, 3, 0xa0, 0,
-		TOP_MUX(0x0, "I2S0"),		/* din0 */
-		TOP_MUX(0x1, "TSO1"),		/* dat6 */
-		TOP_MUX(0x2, "LCD"),		/* oev_dataen */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio80 */
-		TOP_MUX(0x4, "USIM0"),		/* dat */
-		TOP_MUX(0x5, "B_DVI1")),	/* d1 */
-	TOP_PIN(I2S0_DOUT0, TOP_REG6, 15, 2, 0xa0, 9,
-		TOP_MUX(0x0, "I2S0"),		/* dout0 */
-		TOP_MUX(0x1, "TSO1"),		/* dat7 */
-		TOP_MUX(0x2, "LCD"),		/* ckv */
-		TOP_MUX(0x3, "BGPIO")),		/* gpio81 */
-	TOP_PIN(I2C5_SCL, TOP_REG6, 17, 3, 0xa0, 18,
-		TOP_MUX(0x0, "I2C5"),		/* scl */
-		TOP_MUX(0x1, "TSO1"),		/* sync */
-		TOP_MUX(0x2, "LCD"),		/* ld */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio82 */
-		TOP_MUX(0x4, "PWM"),		/* out2 */
-		TOP_MUX(0x5, "I2S0"),		/* dout2 */
-		TOP_MUX(0x6, "B_DVI1")),	/* d2 */
-	TOP_PIN(I2C5_SDA, TOP_REG6, 20, 3, 0xa4, 0,
-		TOP_MUX(0x0, "I2C5"),		/* sda */
-		TOP_MUX(0x1, "TSO1"),		/* vld */
-		TOP_MUX(0x2, "LCD"),		/* pol */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio83 */
-		TOP_MUX(0x4, "PWM"),		/* out3 */
-		TOP_MUX(0x5, "I2S0"),		/* dout3 */
-		TOP_MUX(0x6, "B_DVI1")),	/* d3 */
-	TOP_PIN(SPI2_CLK, TOP_REG6, 23, 3, 0xa4, 9,
-		TOP_MUX(0x0, "SPI2"),		/* clk */
-		TOP_MUX(0x1, "TSO0"),		/* clk */
-		TOP_MUX(0x2, "LCD"),		/* degsl */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio84 */
-		TOP_MUX(0x4, "I2C4"),		/* scl */
-		TOP_MUX(0x5, "B_DVI1")),	/* d4 */
-	TOP_PIN(SPI2_CS, TOP_REG6, 26, 3, 0xa4, 18,
-		TOP_MUX(0x0, "SPI2"),		/* cs */
-		TOP_MUX(0x1, "TSO0"),		/* data */
-		TOP_MUX(0x2, "LCD"),		/* rev */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio85 */
-		TOP_MUX(0x4, "I2C4"),		/* sda */
-		TOP_MUX(0x5, "B_DVI1")),	/* d5 */
-	TOP_PIN(SPI2_TXD, TOP_REG6, 29, 3, 0xa8, 0,
-		TOP_MUX(0x0, "SPI2"),		/* txd */
-		TOP_MUX(0x1, "TSO0"),		/* sync */
-		TOP_MUX(0x2, "LCD"),		/* u_d */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio86 */
-		TOP_MUX(0x4, "I2C4"),		/* scl */
-		TOP_MUX(0x5, "B_DVI1")),	/* d6 */
-
-	/* top_pmm_reg_7 */
-	TOP_PIN(SPI2_RXD, TOP_REG7, 0, 3, 0xa8, 9,
-		TOP_MUX(0x0, "SPI2"),		/* rxd */
-		TOP_MUX(0x1, "TSO0"),		/* vld */
-		TOP_MUX(0x2, "LCD"),		/* r_l */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio87 */
-		TOP_MUX(0x4, "I2C3"),		/* sda */
-		TOP_MUX(0x5, "B_DVI1")),	/* d7 */
-	TOP_PIN(NAND_WP_N, TOP_REG7, 7, 3, 0x54, 9,
-		TOP_MUX(0x0, "NAND"),		/* wp */
-		TOP_MUX(0x1, "PWM"),		/* out2 */
-		TOP_MUX(0x2, "SPI2"),		/* clk */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio88 */
-		TOP_MUX(0x4, "TSI0"),		/* dat0 */
-		TOP_MUX(0x5, "I2S1")),		/* din1 */
-	TOP_PIN(NAND_PAGE_SIZE0, TOP_REG7, 10, 3, 0xb8, 0,
-		TOP_MUX(0x0, "NAND"),		/* boot_pagesize0 */
-		TOP_MUX(0x1, "PWM"),		/* out3 */
-		TOP_MUX(0x2, "SPI2"),		/* cs */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio89 */
-		TOP_MUX(0x4, "TSI0"),		/* clk */
-		TOP_MUX(0x5, "I2S1")),		/* din2 */
-	TOP_PIN(NAND_PAGE_SIZE1, TOP_REG7, 13, 3, 0xb8, 9,
-		TOP_MUX(0x0, "NAND"),		/* boot_pagesize1 */
-		TOP_MUX(0x1, "I2C4"),		/* scl */
-		TOP_MUX(0x2, "SPI2"),		/* txd */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio90 */
-		TOP_MUX(0x4, "TSI0"),		/* sync */
-		TOP_MUX(0x5, "I2S1")),		/* din3 */
-	TOP_PIN(NAND_ADDR_CYCLE, TOP_REG7, 16, 3, 0xb8, 18,
-		TOP_MUX(0x0, "NAND"),		/* boot_addr_cycles */
-		TOP_MUX(0x1, "I2C4"),		/* sda */
-		TOP_MUX(0x2, "SPI2"),		/* rxd */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio91 */
-		TOP_MUX(0x4, "TSI0"),		/* valid */
-		TOP_MUX(0x5, "I2S1")),		/* dout1 */
-	TOP_PIN(NAND_RB0, TOP_REG7, 19, 3, 0xbc, 0,
-		TOP_MUX(0x0, "NAND"),		/* rdy_busy0 */
-		TOP_MUX(0x1, "I2C2"),		/* scl */
-		TOP_MUX(0x2, "USIM0"),		/* cd */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio92 */
-		TOP_MUX(0x4, "TSI1")),		/* data0 */
-	TOP_PIN(NAND_RB1, TOP_REG7, 22, 3, 0xbc, 9,
-		TOP_MUX(0x0, "NAND"),		/* rdy_busy1 */
-		TOP_MUX(0x1, "I2C2"),		/* sda */
-		TOP_MUX(0x2, "USIM0"),		/* clk */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio93 */
-		TOP_MUX(0x4, "TSI1")),		/* clk */
-	TOP_PIN(NAND_RB2, TOP_REG7, 25, 3, 0xbc, 18,
-		TOP_MUX(0x0, "NAND"),		/* rdy_busy2 */
-		TOP_MUX(0x1, "UART5"),		/* rxd */
-		TOP_MUX(0x2, "USIM0"),		/* rst */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio94 */
-		TOP_MUX(0x4, "TSI1"),		/* sync */
-		TOP_MUX(0x4, "I2S1")),		/* dout2 */
-	TOP_PIN(NAND_RB3, TOP_REG7, 28, 3, 0x54, 18,
-		TOP_MUX(0x0, "NAND"),		/* rdy_busy3 */
-		TOP_MUX(0x1, "UART5"),		/* txd */
-		TOP_MUX(0x2, "USIM0"),		/* dat */
-		TOP_MUX(0x3, "BGPIO"),		/* gpio95 */
-		TOP_MUX(0x4, "TSI1"),		/* valid */
-		TOP_MUX(0x4, "I2S1")),		/* dout3 */
-
-	/* top_pmm_reg_8 */
-	TOP_PIN(GMAC_125M_IN, TOP_REG8, 0, 2, 0x34, 0,
-		TOP_MUX(0x0, "GMII"),		/* 125m_in */
-		TOP_MUX(0x1, "USB2"),		/* 0_drvvbus */
-		TOP_MUX(0x2, "ISP"),		/* ref_clk */
-		TOP_MUX(0x3, "BGPIO")),		/* gpio96 */
-	TOP_PIN(GMAC_50M_OUT, TOP_REG8, 2, 2, 0x34, 9,
-		TOP_MUX(0x0, "GMII"),		/* 50m_out */
-		TOP_MUX(0x1, "USB2"),		/* 1_drvvbus */
-		TOP_MUX(0x2, "BGPIO"),		/* gpio97 */
-		TOP_MUX(0x3, "USB2")),		/* 0_drvvbus */
-	TOP_PIN(SPINOR_SSCLK_LOOPBACK, TOP_REG8, 6, 1, 0xc8, 9,
-		TOP_MUX(0x0, "SPINOR")),	/* sdio1_clk_i */
-	TOP_PIN(SPINOR_SDIO1CLK_LOOPBACK, TOP_REG8, 7, 1, 0xc8, 18,
-		TOP_MUX(0x0, "SPINOR")),	/* ssclk_i */
-};
-
-static struct zx_pinctrl_soc_info zx296718_pinctrl_info = {
-	.pins = zx296718_pins,
-	.npins = ARRAY_SIZE(zx296718_pins),
-};
-
-static int zx296718_pinctrl_probe(struct platform_device *pdev)
-{
-	return zx_pinctrl_init(pdev, &zx296718_pinctrl_info);
-}
-
-static const struct of_device_id zx296718_pinctrl_match[] = {
-	{ .compatible = "zte,zx296718-pmm", },
-	{}
-};
-MODULE_DEVICE_TABLE(of, zx296718_pinctrl_match);
-
-static struct platform_driver zx296718_pinctrl_driver = {
-	.probe  = zx296718_pinctrl_probe,
-	.driver = {
-		.name = "zx296718-pinctrl",
-		.of_match_table = zx296718_pinctrl_match,
-	},
-};
-builtin_platform_driver(zx296718_pinctrl_driver);
-
-MODULE_DESCRIPTION("ZTE ZX296718 pinctrl driver");
-MODULE_LICENSE("GPL");
-- 
2.29.2




More information about the linux-arm-kernel mailing list